Shadow control

Similar Questions

• Salient facts clipping disagreed with the Visual image evaluation

  I import a Nikon D700 raw images. I can move the exposure slider all the way to the right, to the point where a large part of the image is obviously saturated, but red highlights done clipping are not present in those blown areas.

  I have read several posts on this subject but am confused so would like a simple explanation and/or a recommendation on what to do to make more useful clipping highlights.

  Some positions attributed this to the internal use of the ProPhoto color space. But even if I have soft proof an image in sRGB, the same thing happens. How do you know, if you export a JPEG in sRGB, that your image will not overexposed areas?

  Thank you.

  pixel_a_ted wrote:

  It is not specific to a single image. Can you just take one of your images with a few bright areas, enable the highlight indicator and move the exposure slider to the right until you are well after saturation (visually). Indicators red nail agree with what you see in the picture?

  PV2012 process version tone controls are 'Adaptive image' and are not the same as in previous versions PV2010 and PV2003. Exposure control works mainly on the areas 'tones '. With the lights and shadows controls the '0' value, they already apply data image recovery. For this reason you increase exposure highlighted clipping will not increase linearly. There is a similar position here:

  Shadow and highlight the point cutting

• get rid of the shadow of the legend in the tab control

  Hello

  I use LV7.0 on W2K and have encountered a difficulty.  Often when I need a text face before being modified programmatically, I'll put a control or the off indicator on the side (out of sight) and serve its legend of the label.  It keeps me from having to find a way to get a reference to a real label... which has always been a pain.  I just use a property node to edit the text in the legend.  My problem is, for the application, that I am currently in train, I need to use a tab control.  If I set the label (caption) in the tab control, it flies over, showing a shadow under it.  It doesn't know if the control is in the tab control only when the control is not in the tab control.  Is there a way to make this stop behavior?

  Thank you.

  Rick

  He's going to do. It was the way it was made to show you that it is not within the tab control. You should note however that when you start your program that the shadow will disappear. The shadow is there when you are programming.

• Control Panel > > designs and printers 'shadow' legacy

  I use a new HP Officejet pro 8500 a (with Windows 7 on the new HP desktop computer. I had to uninstall and reinstall the printer software all a few times. It doesn't matter how carefgul and if I'm in the decision-making process clean and complete, I'm disappearing indications of shadow of my legacy versions that do not exist. I'm afraid of these indicated suggest potential problems, I'm not sure. OIner ghost is my printer and the correct name. A second Ghost is my printer with the name added: HP5DD5OD and the correct name of the printer in parentheses. (The printer correct, verified, as by default appears in full Imaging). If anyone knows what causes this error, please let me know. The printer is just longer under warranty, so I can't ask HP.

  Hi willmck,

  The greyed out printer may still have something left in its queue. Plugged into the USB port and make sure that there are no pending jobs in the print queue.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  Printing and scanning doctor

• Why my Drop Shadow effect has disappeared?

  I used the drop shadow effect all the time in FCPX. Now it no longer displays in the effect controls panel and clips that already had the effect previously, now show that the effect is missing. I restarted the program and it is up-to-date.

  See if it is in the aesthetic category. If she is not there, try reinstalling the application.

• Qosmio X 870 - 13v - graphic problem steam L4D game - black shadow on the light

  Hello

  I play this game using 2 PC Toshiba laptop.

  A Satellite L670-1KZ: 2.67 Ghz - Radeon Mobility HD5650 - RAM 6 GB i5.
  A Qosmio X 870 - 13v: i7-3630QM 2.4 Ghz - GeForce GTX 670 M & Intel HD Graphics 4000 - 32 GB of RAM.

  On the 1st, I have no graphic problem.
  On the Qosmio, I have a BIG problem with little light that have large black stain on it.

  You can see the 'bug' on YT here below:

  https://www.YouTube.com/watch?v=c4E2DFScyfU&feature=youtu.be

  The configuration of the game is the same on both machines with the exception of the resolution.
  My drivers are up to date (GeForce & Intel).
  I uninstalled the game twice only = no results.
  Settings, to control panel Nvidia, I changed several times (Note option shadows cache) no = no results.
  I played with game config below only = no results.

  I posted on the forum of steam only = no response.
  I posted on the forum of Nvidia only = no response.

  So, can you help me solve this problem?

  With our thanks,
  Guillaume.

  You have any other graphic matter using this Qosmio X 870 - 13v?
  I mean other problems related to the image to appear in other games and other applications running?

  Otherwise I n t think that there is something wrong with the laptop.
  In this case, it looks like very specific issues between this game and probably the graphics driver.

  It turns out that you won't encounter problems under this game the Satellite L670 with ATI driver.
  The Qosmio is supported by the nVidia GPU

  I think there must be a link any between the nVidia GPU and this game.
  In my opinion you should look for the solution in the steam forums or nvidia even if you have not received answer yet.

• Satellite A100-788 - LCD turns black-shadow

  Hello to all specialists!

  I have a problem which became unbearable with the monitor of my Toshiba A100-788. When I turn on the laptop for a few seconds, works normally but would then become black and everything is in black shadow. I can see what is on the desktop if I put a strong light in front of my screen. until the monitor worked if I restarted abruptly the laptop but now no longer works. I already replaced the LCD inverter but I have the same problem (should I replace the inverter wires?). and I have already connected to an external monitor and working correctly. I'm a little desperate because I need the documents on my laptop.

  Help, please!

  Thank you!

  Hello

  It looks like a FL. inverter problem

  The FL inverter is a piece of equipment behind the frame of the LCD and this material part controls the LCD backlight.

  In my opinion it s broken and it of necessary to replace this part in order to solve this problem.

  I would recommend contacting a local Toshiba ASP. Guys should help you to replace this part.

  Good luck

• Camera gives a black shadow & drivers Win7 for Satellite A350-13 has

  Hello
  would you help me with my problems?

  1 - my camera sometimes after the launch of gives a shadow black and after a while, it works normally, but generally it works correctly.

  2 - my os is vista and I want to replace it with Windows 7. So, I have not found all the drivers updated toshiba sites. He gave me a message that they don't have what I want. Drivers that I have not found its downloads is:

  Acoustic silencer
  Assist
  Bluetooth monitor
  Bulletin Board
  Assistant bulletin board
  DVD player
  Dolby control center
  Eco utility
  Face recognition
  Firmware update
  Flash cards support utility
  Alert utility Hdd\ssd
  Hardware configuration
  Infrared driver
  Modem region Select utility
  Online product information
  PC health monitor
  PlayReady pc runtime
  Real time
  Remote Control Manager
  Utilities SD
  Service station
  Storage Manager
  Supervisor password utility
  TRS driver
  Tiles for Mobility Center
  Touchpad driver
  WPS library

  Please I want your comments quickly

  Best wishes

  You should try vista drivers as most of them are compatible with Win7. Speaking of camera, you should try to update the software for a chicony

• detail of light and shadow can be edited in Photos?

  I noticed that some editing on the iPhone 6 s tools are not available in OS X El Capitan 'Photos,' setting particularly light and shadow detail.  Is there a way to do this?

  Editing tools are all there, but you have to reveal the advanced tools.  They are hidden by default.

  To use the tool of facts highlights & shadows, open the adjustment Panel, then click on the text in blue 'Add' in the upper right corner.  Now add all the advanced settings, you want to use.

  Click the Basel to the right of the 'Light' adjustment to reveal the advanced controls for "Light".

  The downarrows are hidden, unless you hover on the far right of the amounts of the adjustments.

  The scroll bar is also hidden. You can scroll the Panel to view more signals, if they will not fit in the Panel.

  

• shadow of dash lines

  Hello

  View of a FP is attached. I have a (circled) indicator that I would remove the shadow lines, so that the numbers have no plan whatsoever (when feasible).

  The file is in png format, so hopefully I won't make somebodies ire up... if I have... my apologies.

  Thank you

  Ray

  Ray,

  PNG is the preferred format for image files. So, thank you.

  The best way to get a control or the indicator to have invisible borders is to use the classical orders.  They do not have the effects of shading and can easily be Transparent color.

  Lynn

• controls silver for previous versions?

  Is there anyway to get the new controls of money for previous versions of LabVIEW?

  No, there is no way to make money controls in previous versions (or will there be).

  Although you can technically save files .ctl for an earlier version, that they will not make me properly in the old version. The rectangle rounded corners, gradients and shadows required that we adding new features in LabVIEW 2011 obviously will not there in other versions.

  Simon

• mixture of indicators and controls in clusters

  I have a cluster on my façade containing different types of controls (digital ring, etc.). Two controls are multiplied and the result is displayed as an indicator on the front panel.

  From the point of view of users, this indicator is part of the data set, but it is outside the cluser, looking a bit messy. Is it possible to bring him inside the cluser, on the front panel at least?

  Thank you

  Asked before. The answer is no. You can, however, have simply indicator sitting "over" in the cluster, but not physically in it. Select the indicator and then using the arrow keys on your keyboard, move on the cluster. It is not placed in the cluster, but lie on a different plan-Z. It will be a shadow in edit mode, but the shadow disappears in run mode.

• Create a custom control fantasy

  I am trying to create a Custom Control fancy image processing of the meter of cells.  I want control which allows me to select the image of two types, fluorescent or DAB, and if I choose Fluorescent, will allow me to choose red, green or blue.

  I created two radio button controls, one for Fluorescent / DAB, one for RGB, which looks like this:

  

  I was hoping to "embed" the RGB control of the Type of Image control while having them retain their properties (box of dialogue elements 2 and 3 elements).  When I made the simple drag and drop of RGB on the Type of Image, he acted as if I added elements of a cluster, and I got a box of the 5 elements, not what I wanted.

  Then I'm smart and dragged Type of Image on top of RGB.  Of course, if the Type of Image is at the front, you see RGB.  However, if RGB is in front, see you both, but with ugly shadows around RGB (I made her invisible label).

  

  Anyone have an idea how I can have my cake and eat it, too?  Specifically, how can I get rid of the shadow that the RGB control throws on the Type of Image control?

  Here are the controls themselves, as the excerpts:

  Bob Schor

  How about as a red box Fluorescent, Green Fluorescent, Fluorescent blue and DAB?

  Lynn

• How to get drop shadow text in the windows version of LabVIEW 2009

  In the lower left corner of the JPG attached you can see that the 'dashboard' has a shadow.  I created by accident and want to use the shadow for the control names, but I can't understand how I did it. The only options of 'Style' in my menu drop-down list of properties of text are plain, bold, italic, underline, outline, and bar.

  The help file implies that it can be done under MAC OS. I just did in Windows.

  Does anyone know how?

  This free label is not really inside of your loop, it is "floating" above and this is why LV draw the shadow.

• customize a pie chart in control

  Hello

  I'm trying to customize a button control. I created a graphic to replace one of the standard 'photo points' (accessible via the command Customize, double click on the chart).

  The control I'm customization is circular. The graph I created is also circular, I saved as a. PNG or. EMF, with value white square background transparent.

  When i 'Import from file' in BT import works well.

  It's the image has always a square box shape (even if the background is transparent), then what makes the active control square area, which means that the control can be activated by clicking on the share of which is transparent (i.e. encompassing one of the corners of the rectangle).

  Is it possible to create a graph that is round, or get the custom control ignore transparent areas?

  - or who are all personalized with imported graphics rectangluar?

  Thank you

  Blue

  In version beta LV 2009, I opened your VI and I can only change the value of the control when you click on the imported image. By clicking on where the arrow points or anywhere else in the rectangle but outside the black outline does nothing (so it works as you want). I don't know if it's because of a change in 2009 or something to do with my PC (XP on a virtual machine), but you should be able to find out soon enough when 2009 fate.

  Alternatively, you can try for now is opening the custom control mode change and displacement of the shadow to the top of the z-order. Because the shadow is not clickable and has a 'hole' in the Middle it could work. It does not work here, but again, it is perhaps because of the new version.