Replacement power supply help
I have a computer d4100e Pavilion. I'm going to replace my video card (fan starts giving me intermittent problems). The new map will require probably more power (I'll add more video memory, etc.)., so I'll need t replace my current power supply 400W.
The problem will be to find one that fits the case. My current PS is a model LITEON PS-6401-08HT (HP P/M 5188-0127).
The dimensions are: 5 3/8 "long (front to back), 5 7/8" wide, height 3 3/8 ". Width and height are constarined by the case of sheet metal. The length is limited by the clichés of spring who want to keep the PS to slide in the case of the abduction, but I could probably accommodate a PS liked if I left the springs press against the side of the PS (essentially making them non-functional.
Can you recomment a replacement PS, 600W preference or optics, which fits my dimensional constraints (including the screw holes on the back)? Any help would be appreciated.
Thank you
you have a power supply standar... Try this corsair HX650w... 650 watts
Tags: HP Desktops
Similar Questions
-
I need a replacement power supply.
I have a HP Pavilion m9500z desktop computer and I think the power is out. Recently, the computer would stay on for 15 minutes the TI would go to sleep and would need to reset turn back on. I cleaned the dust thought it was overheating. When I put it back together that light shone for 5 seconds then went out. I tried different outlets and leave it unplugged overnight. should what power supply I? and where can I find an affordable replacement? Thank you!
The m9500z is a (configurable) CTO unit and as such, may have differences of various materials. (More on that later). This is a generic power supply (PSU) supply Tester/tutorial. Here are various internal connectors. (GPU) graphics card connectors are of most concern. Your system may have a PCIE card with a power lead adapter, converting 2 molex 4 pin 6/8 pin PCIE. Start the PSU and back track every lead, noting the connectors and compare the link. Don't disconnect anything. Just take note of what goes where!
Plug a power supply 350W (with a marginal rating 65%) State. But the CTO config on graphics (GPU) GTS250 States to the requirements of a card 450W power supply. You really need to look at the label on the power supply of your device. If you need a new power supply, based on the tests, I recommend the Corsair 500W . It is energy-saving, and the power curve will provide the needed energy without constraint on the system. (Adding a supplement of 100 w ability helps).
-
Updated Studio XPS 8100 Power Supply help
Hi, I recently bought an ATI Radeon 7770 to replace the old model came with the computer. I need to buy a new power supply for the card works properly. I was curious what kind of specs the supply must meet in order to work with my machine. I don't want to fry my computer anyway. I haven't added a new material for the Dell because I bought in 2010.
I thank very you much for any help.
I can confirm that this approach is the chassis: www.newegg.com/.../Product.aspx
-
Replacement power supply 200w ATX - 1956 D by 1956F
HP 873n, replacement food Pavilion have additional adapter. Looks like more recent replacement has been slightly modified. Where to connect this adapter from 3Pin femare? or I leave it unplugged?
chariot5 wrote:
HP 873n, replacement food Pavilion have additional adapter. Looks like more recent replacement has been slightly modified. Where to connect this adapter from 3Pin femare? or I leave it unplugged?
I would venture to say that your female adapter 3 pin must be connected to a male adapter 3 pins on the motherboard. This allows your system to control the speed of the fan on the power supply. I hope this helps you.
-
I'm looking at buying a Z200 workstation but need to install a Radeon HD 4850 in there video card (must be this video card).
This required video card power 450w, with a plug 6-pin on it to power the card which is the Z200.
I tried to get an answer from HP as to whether or not I can improve my own to a 450w power but have not been able to get a straight answer.
Does anyone know if the Z200 have a standard ATX power supply, or are they exclusive as I found with the 8000 elite.
I tried to find a class business PC that will run this video for some time card and come up empty. Any help is appreciated.
Thank you
HP official response has been no other power supply on the market fit and although we found it could void the warranty. After a lot of research and testing we ended up having to downgrad video card.
-
Replacement power supply for Satellite Pro 6100
I just got the power supply of my old SP6000 (PA2450U) die on me and I wanted to know if I should replace it with the same model or another one as I used it on my SP6100. I discovered that the PA2450U give only 45W of power (now I notice!)
Info for the SP6100 page says that the power supply be 75W and I can't find the model number.
Someone can tell me if it is OK or not?
TIA
Hello
You always have to use the supported adapters. The use of different adapters can damage the laptop.
But I agree with Stefan. The adapter compatible and recommended is PA3083U-1ACA
This part you can also order from the service partner. -
Replacement power SUPPLY - 700-210xt Envy
I'm looking to replace the electric power of my pc (http://support.hp.com/us-en/document/c03975089
With this power supply: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139051
I just want to know if his will adapt or be compatible or etc.
Thank you!
Hello
The Corsair CX750 is subject. 8 "longer than your power supply. Open your PC and see if you have enough space between the optical and food drive. It's going to be a very tight fit. You can remove the front panel and slide the optical drive to the front for ease of installation.
Review of the HP position articlepresent.
I generally recommend the CX500, or CX600 because they correspond to the physical dimensions of the HP supplies.
-
HP Compaq: Compaq replace power supply
I need to replace the power supply on my computer
Compaq dx2450 format microtour
The current PLAN angioma is a Bestec ATX0300P5WC
Please tell me an alternative
Hello
It uses 300W PSU, please use the following link for part #:
http://PartSurfer.HP.com/search.aspx?SearchText=KA574UT
You can try (for the first part):
http://www.Amazon.com/HP-463317-001-power-supply-Watts/DP/B00DUG5L3C
or second part:
http://www.Amazon.com/463318-001-Hewlett-Packard-300Watt-power-supply/DP/B00HJKOK9G
Kind regards.
-
replacement power supply HP Pavilion n096sa-15 Notebook PC
Product name: HP Pavilion 15 laptop
Serial number: [under the direction of personal information]
Product number: F4T58EA #ABU
Model No.: laptop HP Pavilion 15-n096saPower AC adapter failed dinner after that I have months - trying to find a replacement - OEM do not seem to make a compatible component.
Tried of Best2Serve - the part, they sent me does not match the connector of the laptop and equipped with a round pin adapter 2 instead of the standard rectangular adapter to UK on the 3-pin - and I can't find a way to communicate with them so I can return this piece and get a refund - return to the link on the invoice process receives no response.
I tried to find a replacement, because even if the laptop is under warranty from PCWorld/Currys they want to return the laptop as well as the adapter AC HP - take anything up to 5 weeks - HP Technical Support say they cannot do anything because I ordered a part of Best2Serve - despite the fact that said the part actually will not work with my laptop
Since the power supply is dead, the battery life is not enough for me to backup/delete my personal/private data before - hence the need to get some kind of power supply (that works)
If the basic question - any number of known suppliers/part that can provide a repacement AC adapter for
Product name: HP Pavilion 15 laptop
Serial number: [under the direction of personal information]
Product number: F4T58EA #ABU
Model No.: laptop HP Pavilion 15-n096saeBay U.K. (although she ships the United States):
Here is the Service Manual:
See page 46 for a list of compatible reference numbers. The part number for the U.K (brick of power at the wall outlet) power cord seems incorrect, because when I search keyboards come upward.
It should be easy to find a U.K. of United States adapter to plug US on the U.K. power grid.
-
Replacement power supply for NI ELVIS II +.
My diet for NOR Elvis II + has been lost. I wonder if someone can provide the part number? It will be appreciated. I tried to look in the manual, but I can't find the part number of the power supply or the plug.
Anyway, it will be acceptable to use a PIN 24V-4 5. 5A max (maximum 100 w) to replace the power supply?
-Although it is not listed on the site, there is a kit of shipping for the power of ELVIS II. A sales representative should be able to create a quote for:
-780382-01 NI ELVIS II / II + Power Supply (cable sold separately).
-
Hi all
Recently, I replaced a non redundant power supply on my Dell Poweredge R410. During troubleshooting, I also temporarily removed the battery from the system at any given time.
The server is back up and running, but when booting, I get:
"The 4 fan speed can change in installation configuration feature and the option card systems
Press F1 to continue, F2 to run the configuration utility.
I think that some BIOS setting reset to remove the battery? I also see a lot of forum posts mentioning the cause of this error is the integrated SATA is connected to anything.
My hard drives are connected to a PERC via the PCI slot, and the machine has an optical drive. I don't see the existence of the optical drive in omreport.
Here are a few outlets omreport about SATA settings.
Integrated SATA controller: ATA
SATA port 0: Auto
SATA port 1: Off
SATA port 2: stop
SATA port 3: Off
SATA port 4: OffAny advice on how to go about this debugging more?
Thank you!
Dave
Yes, it is possible that the optical drive is defective. Check the logs of equipment. Also enter the system BIOS setup using the F2 key and search for devices listed as unknown.
-
HP Pavilion Elite HPE-410F replacement power supply
I want to put a better graphics in my PC, so I can update my video card, but I can't figure out how to get out the existing supply! The whole thing seems to be riveted with the exception of the one side panel to access inside. I could go down the top panel and front as well, but I can't go down any other sides in order to free food after that I have to unscrew. Someone had a bit of luck with this?
Here are the specifications of your desktop HP Pavilion Elite HPE-410f. Here's HP provided the instructions step by step for "replacing the power supply" in your computer.
Please click the White Star of KUDOS to show your appreciation
-
HP Pavilion p6313w Power Supply help
Hello, I was here in the preparation of courses for a new graphics card and found the one that will work.
The link:
Now I'm finally ready to buy it, but I need a new power supply to go with it and have absolutely no idea what kind, where find, or how to get it.
I need a recommendation on the place where to buy one which is 350w or better. Works with my PC and will fit the above listed graphics card.
Preferably a link if possible, but any help really is appreciated.
Thank you.
Markmcx,
The power supply link, I gave you has the measurements you need. It is also an excellent power supply (I).
Here is a guide of what to do:http://reviews.cnet.com/4520-3118_7-5023982-1.html
Upgrade and repair: http://h10032.www1.hp.com/ctg/Manual/c01859455.pdf
How to remove the power supply: http://support.hp.com/us-en/document/c01684432
If you are a novice, don't forget to tag each connector on the old supply as your deletion and compare to the new offers.
-
WHERE CAN I FIND DELL INSPIRON 660 REPLACEMENT POWER SUPPLY?
IM WORRIED ABOUT SPARE PARTS ON MY DESK OF 660 4 YEARS OLD DELL INSPIRON.
WHERE CAN I FIND THE BEST MATCHING OF PSU FOR MY PC... [Admin NOTE: maintain the label removed in accordance with the TOU strategy]
PLEAS RESPOND...
Thank you
JACKSONFRANCIS
Here in the United States:
https://www.Amazon.com/Dell-Inspiron-computer-HU220NS-00-HK320-82FP/DP/B00S8VAGH0
Here in India:
http://www.keyboardshop.in/keyboard-express-p.php/23+Dell+Inspiron_660S+power-supply
Bev.
-
HI, I am looking to update my video card on my hp pavilion p7-1003w,
My specs are:
AMD Athlon II X 4 650: 3.2 ghz
8 GB of ram
250W PSU
Motherboard for N-Alvorix-RS880-formfat (Alvorix) .
Windows 7 64-bit,ATI Radeon 4200
But I met some power problems with my motherboard.
When I plug in a new power supply they have NEVER the '4' 'pu521' adaptor for my motherboard.
http://oi39.Tinypic.com/206dmcp.jpg
my new graphics card is a "Radeon HD 6670'
If someone could tell me a sufficient power supply, that would be great,
-Conner
Conner wrote: thank you very much Hanspuppa! But when you say "I would recommend staying away from these power units more low cost. Many of them will be list a higher rating that they provide actually. "You mean that I should stay away from the"Antec 550 watt power supply"because it seems that it would work for my computer and I want to take a professional Word for it. -Conner
Hello Conner, I'm not a professional at all, not even close. I have 25 years and more cheating on her with these machines, perhaps a professional fool to fool with these machines. but we all need something to do in life.
The Antec, Corsair, OCZ and a few other feeds are very good quality power supplies.
When I suggested to stay away the lower cost ones, I meant those that cost like $19.99 - $29.99 or other similar costs in this range. There are a few low-cost power supplies out there who have some good reviews, but food is the most important in a computer, since everything in the computer runs power off from the power supply.
I always look at the reviews of others to get an idea of what other people have to say and the Antec page linked to over 500 positive feedback. It is a very unusual number, almost everyone who bought this power supply was happy with it.
I used the Antec years products and have never had a problem with their products.
Maybe you are looking for
-
How can I copy and paste pages of pdf of a flowchart software application. I downloaded the PDF on my Mac desktop.
-
I am trying to run two .vi at the same time, one who reads the voltage with a DMM and another who performs a calibration program. I would like to have the DMM vi visible at any time because I need for calibration. Whenever I run the calibration vi it
-
In a Kit (#564 with Photo paper HP) ink cartridges contain the same amount of ink than cartridges purchased individually?
-
Is there a way to hide several updates?
In Vista and upward, it is possible to tick/check/select several updates. What's the point if you can't actually choose to hide unwanted language packs 34 etc.?
-
How to make a single binary a different version of the operating system
Hi BB Experts. In my application, I used according to API according to the requirement of the application: For version 4.51 CoverageInfo.COVERAGE_DIRECT API network supports2 ContentHandler3 resion API provider For version 5.01 ConnectionFactory2.Bro