Replacing motherboard NE56R27U gateway is not well...

My son NE56R27U had a motherboard failure (a short circuit somewhere on the Board, could not isolate), so I bought a new gateway/Acer.  Well, the jury arrived and I replaced it in the laptop, and now it does not recognize the hard drive.  Before start asking you, I have two sons, and each has the same laptop, so I was able to determine that the HARD disk is perfectly fine - I can put it in another laptop and it works perfectly.

I can also use the recovery disc, it does not recognize it.

When the computer starts, the home screen now says 'Acer' instead of 'Gateway'... then I fear that it may be BIOS problems...

I looked in the BIOS (and compared to the work laptop computer) and found that, while the laptop work said it is an entry door and carries the serial number, the laptop with the new Board of Directors said it is an Acer and has a fake serial number (123456789) in the BIOS.  I think that this could be part of the problem.  If I remember well, the recovery disk is 'good' for the specific laptop, and I guess he uses the serial number to check the disc "belongs" to this computer.

So, this is likely problem, and how to update these data?  I can pull the latest updates to the BIOS on the site of the bridge, but they are packaged to run Windows.

I would appreciate any ideas...

Gail

Replacement motherboard resolved the problem.  The computer started immediately with the logo of the gateway, the HARD drive was recognized, Windows starts.  In addition, the serial number that is now on the computer appears in the BIOS.  Then... send this bad mutha... back on board...

Tags: Acer Laptops

Similar Questions

  • Replacing motherboard and processor, now Vista will not activate

    my computer wouldn't activate my windows vista accout... He told me that the product key is already in use... I understand the confusion I had to replace my motherboard and CPU... so my setup has completely changed... but I can assure you it's me the original owner of the product key and it is the same just different computer mobo and cpu...

    * original title - I had to replace my motherboard and processor and not vista won't activate my copy of windows *.

    "meldog" wrote in message News: 44b68b63-556f-44ae-a541-541bef262101...

    my computer wouldn't activate my windows vista accout... He told me that the product key is already in use... I understand the confusion I had to replace my motherboard and CPU... so my setup has completely changed... but I can assure you it's me the original owner of the product key and it is the same just different computer mobo and cpu...

    If your Vista came pre-installed, so it's an OEM license - and replace the motherboard except in conditions of warranty is not allowed. Notice of MS, the card mother IS the computer
    You will need to purchase a new FULL version commercial license and edition of Windows you want - from the motherboard is (probably) new, it must run Windows 7 with happiness.
     

    --

    Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  • WiFi access limited, error: "the default gateway is not available.

    I just bought a laptop Windows 8 last December. It had been repaired twice (change the motherboard). He works all fine until last week, wifi connectivity started showing limited access. Furthermore, my IPV6 shows no access. I tried many solutions to many websites, but all will not work. Is there another way? When I trobleshoot the problem, it will show wifi Internet but when I run Google Chrome, it displays an error of internet connection. After I trobleshoot, the stated problem is "the default gateway is not available. In addition, he recovers in about 5 minutes after trobleshooting access. I need a solution as soon as possible. URGENT!  In addition, may I know what caused this do? I hope some of you can help. :(

    Dell Inspiron 7420, unique language of Windows 8

    Hi Amos,.

    I understand that your WiFi connection fails.
    According to the guidelines of the error (the default gateway is not available), there is a problem with the gateway IP address that does not connect to the internet.

    I would be grateful if you could answer the following questions:

    1. did you of recent changes made to your computer (installation of updates, device drivers)?

    2. which antivirus app do you use?

    What are the troubleshooting steps you have tried?

    Here are a few troubleshooting steps that you can try to solve this problem.

     

    Method 1: Manually assign the IP address and the default gateway and check if it works very well. Before you assign manually the IP address and the gateway by default, do
    a note of the IP address of the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

    To manually assign the IP address and default gateway, follow these steps:
    a. in the system, right click on network icon tray. Choose the open network and sharing.

    b. click on change adapter settings

    c. right-click on the card's wireless connection and click on properties.

    d. Double click on Internet Version 4 (TCP/IPv4) Protocol and assign the IP address manually.
    Example: Old Ip address is 192.168.0.1
    Replace the IP 192.168.0.50
    e. leave the subnet mask and default gateway are the same.
    Subnet mask = 255.255.255.0
    Gateway by default, would usually 192.168.0.1 or 192.168.1.1
    f. click apply then click Ok and restart the computer and check if it helps to solve the problem.

    If the method above does not work, proceed to the next method.

    Method 2: I suggest you try the steps from the link given below:
    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1


    If you have additional problems, please reply to this post and we will be happy to help you further.

  • HP Pavilion Elite e9180t - replacement motherboard

    So some time, HP has done a service to replace motherboards on defective Elite systems.  There was even a Web site configuration to help with it (www.hpelitedesktopsettlement.com).

    Unfortunately, the site is no longer active and all links to HP's internal documentation are not valid as well.

    One of my clients has long lived with the random blue screens, and we're finally going through the review process it.

    Who should I contact to get this replaced motherboard?

    Please see the information available on the HP Pavilion Elite Desktop Class Action Lawsuit settlement on the LWSEP for the HP Pavilion Elite e9150t, e9180f, e9180t, m9600t, m9650f, e9280f, e9280t and computers e9290f. "If the court approves the proposed settlement, HP will post on its website a notice on repair program with instructions on how to make eligible arrangements to receive a repair. You will have 90 days after this notice was posted to contact HP for repair repair. "It seems that HP has posted the LWSEP notice on or around 12/01/2011 and that's why you got until about 01/03/2012 to take advantage of the LWSEP.

    Previously, I suggested that people "contact HP customer support directly and see if they will replace the Commission under this program has expired." Please post back with your results. If you are not successful, I can try to contact HP on your part.

  • Vista key after replacing motherboard

    HP Pavilion 2419US motherboard went bad and we replced, everything is going well until, after we have installed vista on the recovery partition and he said the key to the BONE would not work. That's Vista Home premium and the replacement motherboard was obtained from eBay, the original and this motherboard have AMD procs.

    Maybe a good time to look at upgrading to Windows 7 ?

  • Satellite P300 - replacement motherboard part number

    Hello

    Recently, I broke my AC adapter / CC and had it disarms by my local store that has done a bad job and short-circuited as a result controllers on my motherboard. He is now dead and I need to find a cheap replacement motherboard. Would someone be able to help me find the exact reference for my model - PSPC5A-00U00E?

    There are as many P300 and do not want to take the risk of getting a bad motherboard.

    Thank you

    Hi sonikcharge,

    I think that these technical issues can be answered by an official authorized service. Guys can order all spare parts Toshiba and exchange it for you.

    On the Toshiba site, you will find a list of them. Get in touch with them and ask for it. I'm sure they will help you as much as possible! :)

  • Replacing motherboard laptop satellite SA50-112

    Hello. First, no one knows where I can find the serial number on a portable Satellite SA50 112 motherboard and where I might be able to order a replacement motherboard from? Water is accidentally spilled on it. I have contracted the jury, just can not find the serial number.
    Thank you

    Hello

    You can find the right Toshiba service partner who is responsible for you count on this site: http://eu.computers.toshiba-europe.com

    Good bye

  • HP Pavilion HPE h8-1114 Deskto: replacement motherboard on HP desktop PC

    Given there are too many problems with the motherboard of Pegatron IPISB-CU (Carmel2) on a HP PC that is 4 years old as my blu - ray player and dvd player not working not both at the same time, the video card fan died won't spend countless hours searching the same replacement of a video card that will not play new games. Recent maps have new bios UEFI which are not compatible with the map of Pegatron that I and most of the companies do not have BIOS custom to make the card work with the motherboard. I thought about replacing the motherboard and try to push it another 2 years. However I have a few questions about this process.

    First, WILL the Intel Intel Core i5 2400 processor currently on the HP PC will work with another different Board or is LOCKED to the current configuration of the motherboard and will not work with any replacement motherboard? How about the memory sticks? I know that Intel makes their products compatible with their own products and the upgrade/replacement by other non approved parts HP will not work with their products.

    How will be my Windows 7 installation is affected by the replacement of motherboar? I have to do custom / clean install of Windows 7, or I'll still be able to use the Suite of recovery in the PC to re - install Windows 7?

    I'm not planning to upgrade the power supply on the PC because I'm shopping for a low-power video (not the means.) map And I also know that if I update the motherboard, I know that I lose the wireless/Bluetooth card and the card reader because it has a secondary power supply that I did not see in any other configuration of the motherboard.

    Or simply scrap system and start from scratch. I can't believe my $900 luck down the drain in less than 4 years.

    Upon reflection, while I do not normally give replacement Advisor, these two motherboard will work with the CPU and the memory that is currently in your PC

    Gigabyte GA-H61M-S1

    ASUS P8H67-M LX

    Being that they are not current models, so that he may be uneven buy locations.  I will leave that option open.  These form factors (case plug Assembly) is not compatible with the present case.   Check the mounting options in the current case vs buying a new case.

    Other issues, keep me posted.

  • Replacement motherboard for HP A6030N?

    Hi all

    I am using A6030N desktop for five years, had to let it stay on for almost two years.

    But this desktop computer little worked fantastically til last week.

    Its motherboard might have been fried, but I'm not sure. Here are the symptoms.

    (1) whenever the power cord is connected, everything is turned on even if I did not press the power switch.

    Swapping 2) power supply card and remove switch power connector has not helped. Whatever I do, he repeated #1.

    I was looking for a replacement motherboard, Nettle3-GL8E(ECS MCP61PM-HM), but the lowest price was $ 60, quite expensive for the old model.

    I'm not good in material stuffs, I have no idea what to do. Yes, is there an alternative AM2 Motherboard recommendable for this office? Or is it safe to use any motherboard AM2 running? There will not be any problem of BIOS?

    Please let me know

    Thank you!

    M

    The other disadvantage is that the background shield of basket I/O (where the audio and other ports are) will not match. This means that the desktop computer PC will always be open to the back of the motherboard for dust to enter.  It is not a big problem if you want to combine a system.

    Any Micro-ATX: 24,4 cm (9.6 inches) motherboard x 24.4 cm (9.6 inches) will adapt and sealants should correspond to those in the case. Make sure that the power supply in the original system has all the required connectors for the new mobo...

  • Replacement motherboard caused my missing number product! @#?

    OK, after that fixed HP replace my motherboard because of some devices on the motherboard has encountered a few problems... then I open software assistant HP spprt and difficult to do something because of the number of products undetected... so I am gone for nothing that ve find something to do with that and someone recommended card mother tattoo... I had the software tatoo and too afraid to muself as I read the other posts on this subject that this procedure can be run only by hp? ! and I thought that they should already tattooed my motherboard after finishing to replace im really upset and press... can someone tell me how in hell can I recover my series or product key back to my pc... the problem is I do not see the HP logo when I start my pc, I already turn off the stuff..:/ diagnostic boot but it's the same, more when my pc went to sleep mode only indicator light monitor went to Ember not light on the CPU... omg quick replay please... I feel so disappointed on the purchase of HP products and shit...

    HafizulHazmiey,

    Here are the specifications of your desktop HP Pavilion p6645d. Based on these specifications, your computer was presented for sale or 06-Sep-2010 in some countries / regions in the Asia-Pacific market. When your computer was service by HP or an authorized service center, the replacement motherboard should have been tattooed with etc. series, model of your computer. Without that information, software support HP and HP Recovery may have problems to do their job. Please contact the HP support in your area. IF you can not get a positive result, please PM (private message) me and I'll try to help your with the question.

  • My internet rpet 'unidentified network' + "the default gateway is not available"...

    My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

    Hello

    ·         Did you do last changes made on your computer before the show?

    ·         Using internet connection wired or wireless?

    Method 1:

    Follow the steps in troubleshooting from the link and check if that helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Temporarily disable the firewall on your computer and check if it makes a difference.

    Reference:
    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

    Method 3:

    Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
    a. Click Start and in the search box, type cmd.
    b. right click on command prompt, select "Run as Administrator" to open a command prompt.
    c. at the command prompt, type the following commands:
    netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
    netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
    netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.

    d. restart the computer.

    Also, see this KB article:

    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357

    Kind regards

  • Replaced motherboard on HP PC Windows Vista Home Premium (32 bit)

    On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

    Thanks for you help!

    HC

    You pay with the exchange for motherboards.

    1. you normally have to reinstall the OS after changing motherboards (different drivers)

    2 Microsoft won't provide a new product key.

    3. you can try explainging what you do.

    4. 'How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Vista 64 Home Premium, replaced motherboard, system recycles reboot.

    I can't start in the trunk or any other mode. Insert my Windows disk and repair of the first time did not turn. I did a test of memory, and then restore from the Windows disk and again began a repair and he says he can fix it. I can get a quick C through the repair utility, however.

    Thank you

    Tony

    Yes; unless you contact the computer manufacturer and / or do it "as defined by the manufacturer's warranty."

    It's the part of this Microsoft Information which concerns you, as you say now that you have an OEM license:

    "If the motherboard is upgraded or replaced for other reasons that a defect, then a new computer has been created. Software operating system Microsoft OEM cannot be transferred to the new computer, and the new operating system software license is required. If the motherboard is replaced because it is defective, you need not acquire a new operating system for PC license as long as the replacement motherboard is the same make and model or equivalent/replacement by the manufacturer, as defined by the manufacturer's warranty. »

    We have no access to the terms of the warranty of the manufacturer of your computer. It's something you'll have to discuss with them.

    Normally, unless there is a common to many users, provided in OEM manufacturing defect cards mothers, you can't replace OEM provided motherboards.

    See you soon.

  • Recurring "the default gateway is not available.

    At random times throughout the day, I get a "default gateway is not available", and after you run the troubleshooter, it solves the problem, but then later in the day, it happens again. Why/how does this happen?

    Hello

    Thank you for give Forums Community Microsoft the opportunity to help you with your concern for Windows.

    According to the description, it seems that you are having problems with error default gateway is unavailable.

    I need to ask you some questions to help you better.

    1. which browser is installed on the computer?

    2. were there any changes (hardware or software) to the computer before the show?

    We will try these steps and check:

    Method 1: assign the IP address and gateway manually, follow these steps:

    has. in the system tray, right-click right network icon. Choose Open network and sharing Center.

    b. right click on Local area connection and click Properties.

    c. Double click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.
    Example: Old Ip address is 192.168.0.1
    Replace the IP 192.168.0.50

    d. let the subnet mask and default gateway are the same.
    Subnet mask = 255.255.255.0
    Gateway by default, would usually 192.168.0.1 or 192.168.1.1

    e. click apply and Ok and restart the computer and check if it helps to solve the problem.

    Method 2: Perform the steps in the link and check.

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

    Answer to us if you are having problems with the network or any other problem of Windows, and I'd be happy to help you.

  • Smartphones blackBerry how can I fix this error: "The XML is not well-formed."

    What is this error?  "The XML is not well-formed."

    I was always able to access the site of ringing in the AT & T Mall until today.   All of a sudden, I get the error XML, as shown above.

    What is it?  How should I do?

    You change the option in the configuration of the browser for something other than blackberry.  You can change it to Internet Explorer or Firefox.  I've noticed this problem when I try to access my Bank Web site and the web address think that it is accessed from a blackberry browser and not a general public.  Now when you download things like themes that you get from a site of third party... where they send you a txt message to click on a link you must replace blackberry.  Here are the instructions for how to do this:

    Open the browser

    Click the button (Menu) Blackberry

    Scroll down to Options

    Click on the browser Configuration

    Under the browser Indentifcation change to Internet Explorer or Firefox

    Then try again ringtone site.

    Let me know if it works

    Thank you

    PBKolsun

Maybe you are looking for

  • Recognition of people in the Sierra

    Once the Sierra scanned my pictures and created the new people section, I clicked on 'Confirm the additional picture' for each name. We find it much more. But I made mistakes--I said 'No' to some that I I realize now shujld agreed. Is there to force

  • Updated plug-ins, but the profile still shows the old version

    I spent most of the morning trying to update my Silverlight plugin to the latest version (5.1.10411.0) of the old version which has blocked now (5.0.61118.0). I tried several downloads and installations, with the plugin disabled and disabled it, and

  • Who to back up data from USB airport

    Hello everyone, I have an older version of Airport Extreme (7.6.4 firmware version) that has a USB drive connected as a fileshare storage device. Now, I'm looking for a good concept of backup files stored on the USB - stick. Are there suggestions, ho

  • HP ENVY 5646: Replacement of the ink cartridges

    Hi - I have the all-in-one printer from HP ENVY 5646 and endorsed the Plan of instant ink Hp. I just run out of the "no Flash" color ink cartridge (ink cartridge black 'no snapshot' is about half full)-both "no snapshots" cartridges supplied with the

  • I just malware that froze the safari. How can I get rid of him?

    I was trying to go to amazon when what follows has appeared, "channel7news.co" appeared and told me to call an 866 number or go to support.microsoft.  Safari frooze immediately.  I immediately force quit safari, but when I tried to start, it was stil