Replacing the HARD drive in the HP 625 notebook

Similar Questions

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• Replace a hard drive in dv6 but is not completed the installation phase

  I replaced my hard drive with a disks recommended by an expert from HP in this forum, and he seemed fine. After starting with my #1 recovery and loading of each disk when you are prompted, I got the final guest/message: "preparation of the recovery is complete. Remove the system recovery media. Once the computer is restarted, the installation of recovery process will begin... Support on continue restart the computer. "When I hit the"Continue"button, the screen went black as if it has been restarted. But instead, a black screen with the HP logo in the centre appeared, with the text: "Press ESC for Boot Menu" in white letters in the lower left corner. Waited about half an hour, and then you press the ESC key, but it changed nothing. Same screen HP. And that's all - nothing else has happened. I left it on all night, thinking perhaps that it takes time to get there, but in the morning, the same screen was there and my phone was hot as if in use. So I turned it off right there. What would not, and that I should try now?

  Turns out that I don't need to download the Microsoft Windows software and then struggle to find the right drivers, thank God. My recovery discs works perfectly after all.

  Having read tons and tons of forum posts about this problem, I finally found a solution that worked really - posted by another user, GoodTimes81 (thanks!). This solution is pasted below (with numbers and an additional note added by me):

  (1) put the recovery disk #1 in and

  (2) when the Recovery Manager screen loads, you will get a few options, but the one you want is the command prompt (which appears after you select "Run a computer check.")

  (3) in the command prompt, I typed bootrec.exe/fixmbr, you press on enter and waited it says the operation completed successfully.

  (4) I typed bootrec/fixboot and then you press on enter and again waited until he said the operation has completed successfully.

  (5) after having done that I left the command line, restarted my computer and waited until my recovery disk #1 loaded up again.

  (6) then, I chose the recovery system to the Recovery Manager screen and went through the process of insertion of disks 1 to 4.  When the 4th disc is complete, it says remove the recovery disc and press on continue, which I did, then it restarts, except that this time it restarted and actually started the installation and facilities it is supposed to do and has completed the recovery process.
  _________

  The other user said these steps solved the problem for her, and they could work for you. Finally, they worked for me, except after step 5, the recovery disk #1 would not load again. I received an error message (the black screen, white letters) mentioning a problem of location startup (sorry, that I did not write down exactly what he says). I pressed the button power to restart, but got the same error message.

  So I pressed the button to power again but this time, you press F11 repeatedly until I had a menu of options. The option to boot was F9, then I pressed F9 and selected "CD/DVD player" (which I had already done elsewhere earlier in the process, but maybe it had reset after entering the command request?) and then restarted again.

  This time, it worked, and I was back in step 6 above. Load the discs one at a time (note: I have 7 discs instead of the 4 mentioned by another user), and after that the disc was done and I got the prompt to "Press continued to restart", it restarted and he proceeded to load all the software, drivers, etc as it is supposed to. Yay!

• I replaced my hard drive. How can I get Windows XP loaded on my computer? I've already paid the fee.

  I replaced my hard drive.  How can I get Windows XP loaded on my computer?  I've already paid the fee

  Hello rsmith3042000

  What kind of system do you have?

  Do you have an XP installation CD?

  Here are installation tutorials

  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

  http://www.michaelstevenstech.com/cleanxpinstall.html

  If you had only a recovery partition, it's lost now so you might contact the manufacturer and ask for the CD recovery.

  .

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  Find all programs I had installed in C:?

  See if this tutorial will help.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim

• Replace a HARD drive in RAID 1 PowerEdge 2950, question on the process

  Having never had to replace a HARD drive in a RAID 1 configuration on a PowerEdge 2950 Server (PERC 5 / i).

  Can I do put in custody or from a cold start?

  I replaced the HDD failure with the new HARD drive with the same part number.

  This is my boot volume, so I don't want to spoil...

  THX

  If the data is critical, and you don't have a backup, get one now.

  NEVER stop a server to introduce a disk. If the reader poster pred fail, force the drive offline first, then remove it. If it is already broken, then just pull it off.

• I need to replace my hard drive on my laptop. How can I install my apps on the new drive without having to pay another subscription

  As the title of the discussion. I will replace my hard drive on my laptop to improve performance, which means reinstall my Photoshop/Lightroom and Bridge apps. How can I go about it without having to pay another fee to subscriptio?

  Simply install them again.  You are allowed two active installations at the same time.  If you have already used, the installation process will tell you that and whether to disable one of the facilities as soon as possible.  Say Yes.  If you have not installed on a desktop as well, then open Photoshop on this system.  If it has been disabled, tell it to disable a previous installation, as you did with the laptop, and you should be OK from there.

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. It's saying that the product may be false and it will not be installed. Any suggestions?

  I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. That is to say that this product can be wrong and it won't download. I downloaded before and didn't have any problems. Any Suggestions?

  Use one of the links below

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Had to replace my hard drive.  Loaded Windows 8.1 (new) was able to load the office, but can seem to find how to load Acrobat Standard, I have my license

  Had to replace my hard drive.  Was able to load the loaded windows 8.1 desktop (new), but can seem to find how to load Acrobat Standard, I have my license and you can't reload acrobat

  Hello

  Could you please tell the version of Acrobat you want to download so that we could provide you the specific download link?

  Concerning

  Sukrit diallo

• I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have both the serial number

  I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have two serial numbers.  I can't find a number that strives to speak to a live person at Adobe.  I need to reduce the size of the pixel today on some photos and need the program.  Is there another way to reduce pixel if I can't get my Photoshop runs today?

  See the page linked below.  Your installation/serail number will not work.  You need to acquire a download for it with a specially assigned serial number...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I am about to replace my hard drive. How can I reinstall forefox and always keep all my favorites and other related information.

  Question
  I am about to replace my hard drive. How can I reinstall firefox and keep all my favorites and any other relevant information

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles
  • here explain how to make a backup of https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information profile
  • here explain how to restore

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• Stream HP 200-009: replace SSD (hard drive) and reinstall Windows and drivers

  Hello

  My warranty is over a few months ago and I need to replace my HARD drive which is unnecessary, because all the space is taken by the OS, I can not upgrade to Windows 10. Could you please help me how to recover my key Windows and drivers HP before changing my HARD drive + tips on replacing drive HARD would be also useful. There is no service HP here so I have to do it myself.

  Thank you, I finally solved the problem by creating a partition under Advanced options and recovery of Windows drive, and you select Reset. Search for main windows and use Windows system image did not work with the version of Windows OEM.