Plug n play devices moved it espically keyboard drivers

Similar Questions

• Satellite A100 and Plug-and-play devices

  I have a Satellite A100 with Windows Vista Home Premium. This is the second time I try to install a plug-and-play device, but the computer asks me the driver without finding her.
  The first time I tried to install an external hard drive (Packard Bell store and save) and the second time I tried with a modem that works with Mobile SIM cards.

  The modem is designed to work with Vista, my computer can recognize the model, but he finds no driver, so I can't use it. I'm sure that the two devices work properly because I use them on my desktop which has Windows as an operating system.

  Can you help me please?
  Thank you

  Hello

  Do you really think that Vista has obtained all the necessary drivers? I mean, you will need to install the driver files when Vista could not find anything. That's just logic and no mistake. It s more a mistake of thinking. :)

  So, go on the Web site of the manufacturer of your hardware "plug-n-play", download the drivers for Vista, install them and be happy with "plug-n-play" when you attach your devices.

  Welcome them

• Problems with Plug n Play device drivers

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '. I tried the search function for a folder called instr.lib, but I couldn't find one on the computer. I made a new folder instru.lib and run one of the files .llb, which opened in LabVIEW, manually, but they gave me ten mistakes most read like this

  "-VI should happen to ': \hp81110a\hp81110a.llb\HP81110A Reset.vi' has been charged with"C:\Users\Lab\AppData\Local\Temp\Temp1_hp81110a.zip\hp81110a.llb\HP81110A Reset.vi"

  I tried to manually navigate to the folder \AppData as to move to the folder where they were expected, but I did not see this .vi when I opeend my user \Lab\ folder.

  What happens here?

  Thanks in advance!

  vweltin wrote:

  I try to manually install drivers of Plug-and-Play devices for my Aglient 81104 A pulse generator, and I'm having a little difficulty. I found the instructions to know how to manually extract the files, but the instructions say to paste the folder (which contains two files .llb and about 10 files without extensions) to "National Instruments\LabVIEW\instr.lb", but the thing is, I do not have a folder under \LabVIEW\ \instru.llb. All I have is 'MAX' 'NOR-DAQ' and 'shared '.

  Your operating system is windows, no?

  You search under \Program Files\National Instruments\LabVEW (version)?

  Apparently not that you are looking in the right folder of LabVIEW.  You should see:

  applibs

  self-test

  CCodeGen

  cintools

  Database

  examples

  Help

  InStr.lib

  Internet

  ... and so on...

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• my computer says that the hlnfd on my plug n play devices does not or is not found. His original my computer to hang and I can't fix.

  my computer says that the hlnfd on my plug n play devices does not or is not found.  His original my computer to hang and I can't fix.  Any ideas?

  Original title: does anyone know how to do the hlnfd works on my windows 7

  See this. This seems to be a remnant of some malicious software

  http://www.bleepingcomputer.com/forums/t/520743/hlnfd-missing-driver/

• I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  Hello

  I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.

  http://support.Microsoft.com/kb/310575

• Windows XP 32 bit ceased to recognize plug and play devices.

  Recently, I had a virus and had to reinstall windows. After installation, I've updated all the drivers and Windows updates. My mouse, keyboard, monitor, and wireless adapter to work correctly. After about 3 weeks, I went to install my printer. I installed the hardware, but it could not connect to the printer. I followed the instructions of the manufacturer again and again but it never connects. His grateful sound because when I turn on the printer or offshore, I hear 'bing', but it doesn't connect. I used the "New hardware found" Wizard with the disc in the drive and it looks right and research, he never does the program on the disk. I tried to use the camera to Windows and the scanner Wizard with no luck.
  After that I gave up, I tried to use my camera, that has worked well until I reinstalled it and it happens "New hardware found" and the "new hardware detected" appears, but it does not recognize the CD, just look and watch for hours. I got fed up and finally bought a "plug and play" card reader SD and the bubble appears in the toolbar "new hardware found", but then the "new hardware found" stands and asks a disc! Its a PLUG and PLAY! There is no disc! The material is on the device! It's not my USB ports because he DOES not see something trendy and I checked Device Manager and he said his work without no problems found, but it does not connect to it. Does anyone have any info on what this might be? ANY help with this is greatly appreciated! Thank you

  Hi pressure,

  Peripheral Plug n Play need driver for the operation.

  PnP means that you do not have to restart the computer to install something.

  I suggest to update the drivers for the chipset of your motherboard and see if a firmware update is available for your BIOS.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP SP3 USB errors / unknown devices with Plug and Play

  I have problems with USB flash drives and other plug-and-play devices detected by windows. After taking all possible measures to correct this problem (e.g. windows update, chip / update of the bios, update driver, driver and media ultilites reinstall, uninstall and allow windows update after restarting, removal of hidden devices and even remote tech support from Dell) whenever I connect a flash drive or use all plug-and-play devices it is detected as an unknown device and I can not put updated pilot any port I use. Hardware problems were excluded dute to recognition of the device and USB keyboard and USB mouse are functioning properly. Also these same plug-and-play devices worked well on other items of work. After Googling my eyeballs, I gave up and need help please. The only thing I can do now is to reinstall the operating system that really, really, I don't want to do.

  UPDATE *.

  Dell has replaced the motherboard and the problem was solved. Thanks to all here who offered advice and patience.

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install and use a plug-and-play mini dvr/camera in windows xp?

  Forgive me, I have very little computer knowledge. I need step by step instructions on how to use a mini-dvr/camera "plug and play" in windows xp. How do I connect my dell d600 laptop? How to play what I recorded on it?  Thank you in advance for any help rendered.

  Hi, Fred Flintstone786,.

  ·         Have you tried to plug in the device?

  ·         The unit get recognized by the computer?

  Please see the following articles for more information on the Plug-and-Play devices:

  Overview of plug-and-Play

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_overview.mspx?mfr=true

   

  Installation overview of devices

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hardware_installing_overview.mspx?mfr=true

   

  Get the Plug and Play device driver support

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/pnp_driver_support.mspx?mfr=true

   

  To reinstall a Plug-and-Play device

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_reinstall_device.mspx?mfr=true

  Hope this information helps.

• Does not, XP 8176 controller plug-and-play

  I have a system controller 8176 under XP. OR PXI-devices are not detected plug-and - play. Last XP and OR corrections updated. The system has 512 MB of ram and > 10 GB of free space on the disk. No "yellow marks" ion device with the exception of the PXI advice Manager.

  I have several different devices PXI, 6608 timer, 4461, etc. 5406. None are detected PNP.

  This works: => Control Panel Add material etc.

  Device Manager-online-online 'New Hardware Detection' data acquisition devices does not work

  Whenever I put to update MAX, all PXI devices date back to be undetected, with a yellow exclamation point in Device Manager and MAX the device has an 'X' mark and a symbol of the plan.

  Repeat Controll notes-online hardware etc add the hardware and then things work very well from there once again.

  I tried to remove all cards except the 6608 timer, but it is still not detected.

  Any ideas? Is it possible that I miss some of the software components?

  Thanks in advance

  It was just the XP "Plug and Play device host Universal" service that had been disabled...

• Satellite M50 - YK4 plug and play mouse/keyboard

  I tried to use a USB keyboard/mouse for my laptop, but windows does not recognize it. They are peripheral universal plug n play and yet it takes me to the "new device found". I also tried to buy keyboards with software and despite the installation, the new hardware wizard still appears upward. When I try to install the drivers, it gives me just an error message (Code 10, device cannot start). When I bought my laptop, I could use my usb mouse and keyboard without problem, so I think that it's the corrupt drivers. All USB ports are working fine and my IPOD and phone, printer also work. Any help on this would be appreciated.

  Try to remove all associated USB drivers. Go to-> Add/Remove Programs Control Panel.

  Installation of the keyboard and USB mouse driver can cause problems, then remove both drivers. They work very well using the standard mouse and keyboard drivers.

  Another thing you can try is to reinstall the Intel Chipset driver.

• Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens.

  Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens. How to solve this problem?

  try to reinstall the Intel chipset drivers:

  http://us.Acer.com/AC/en/us/content/drivers/4531;-; Aspire 20ZS600%

  Select your operating system and download the drivers from the Intel Chipset, and install it, restart, and try again.

  or

  Press the logo windows + x

  Choose Device Manager

  Click controller series universal

  Right-click on the Intel USB controller, and then choose uninstall

  Once done, reboot and wait windows re - install the drivers

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo