Replicas in local SSD and BONES on the shared storage, discovers 5.1

Similar Questions

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• A very basic question about the shared storage

  To implement GR 11, 2 in Sun SPARC 5.10, our sys admins have allocated block devices in the shared storage and they sent us a letter mentioning the disks. This is what looks like their mail
  
  Storage attached with the Node1
  

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  Storage attached to Node2
  

  /dev/rdsk/c5ikdzj2
  /dev/rdsk/c5ikdzj5
  .
  .

  When I connect with the Node1: / dev/rdsk, I see

  /dev/rdsk/c4ikdzs3
  /dev/rdsk/c4ikdzs4
  .
  .

  as they have said. Same for Node2
  
  
  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  resistanceIsFruitful wrote:

  But all raw devices mentioned above should be visible at/dev/rdsk of nodes. Right? Isn't that whole point of CARS; Shared storage ?

  Not exactly, if you are referring to the names of devices...

  Each core will make a discovery to support when starting. When dealing with the LUN through one HBA (or similar), there is absolutely no guarantee that the nuclei will detect the LUNS in the same order and assign the same scsi device names to them. A LUN can be called device-foo-1 on a single server and device-foo-21 on another.

  In addition, several HBAs will be dual port and dual fiber running channels. So, not only is the same logic unit seen as a scsi device, different number of each core but you can see more than once. Device-foo-1 and device-foo-33 may be the same physical LUN on server 1.

  To solve this logical device name is required. This will be the name of the same device on all servers - and that it will support multiple paths of I/O to the LUN in turn seamlessly. This is done by looking at the unique signature of the SCSI - called WWID or World Wide nameof the software "special driver. With this unique signature, s/w only recognizes a specific LUN, regardless of what server s/w runs on.

  This s/w is called Multipath on Linux, EMC Powerpath and so on. I expect that you will have something similar on your servers.

  Scsi device that is mapped by the kernel to the unit number logic is not used. In the case of multipath , for example, use the + / dev/mpath/mpath+ devices. In the case of Powerpath, these will be + / dev/emcpower+ devices.

  What are the names of device you will use to 11g Grid Infrastructure and Oracle ASM and RAC installation and configuration of shared storage.

• Install Windows 7 on SSD and programs on the HARD drive?

  Original title: conner bottomley.

  Hello

  I was wondering if you could help me! I recently built my own PC, it has 2 drives (1 SSD and 1 HDD) and I want to have windows 7 (64 bit) installed on the smaller SSD and all other files and programs on the larger HARD drive could you give me some instructions on how to do it? I've been strugling for awhile now!

  I am completely new to this so if you can keep it nice and simple, would be great!

  Thanks for your help :)

  Conner

  Have your program files on the HARD drive defeated the purpose of having an SSD in the first place. The goal is to start the operating system and load your programs faster.

  Then, install the operating system and programs on the SSD and store your personal files (Documents, music, photos, videos etc.) on the HARD disk.

  Demarrer start from the Windows 7 DVD, and then select the SSD drive during installation

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  

  Click Custom install Windows only (Advanced)

  

  Select the SSD drive, and then click Next.

  Once Windows 7 is installed, you can redirect personal folders on the HARD drive to store your files.

  http://notebooks.com/2011/05/18/how-to-redirect-your-personal-folders-in-Windows-7/

• Recover files and BONES after the virus

  original title: lost everything with a virus... Please help!

  Hello

  I recently had a virus on my computer which made me lose everything. (I use my wifes pc write this).

  I lost everything on my machine, including my windows vista Home premium.

  Please can someone tell me how I can get this new.  I have the sticker on the back of the machine with all the numbers, etc. activation code.

  Any help is greatly appreciated, thank you.

  It is the first virus that was able to pass my AVG antivirus.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• file permission security and files on the shared drive

  Hi, we have a folder called 'Team' in the shared drive \\India\Team. I placed an excel file named "Hourly" activation "share workbook" option for multiple users in my team. I have a total control on the 'Team' folder access I want to give read access to the members of my team 5 at the level of the 'Team' folder and change the access to my 5 members of the team at level 'hourly production' file so that all members can be updated hourly count at the same time. Limitation should be my team members should not be able to rename the folder 'Team' and should not be able to delete the file 'hourly Production '. I tried a lot of things, but it does not work. Please help me. My mail id is * address email is removed from the privacy *.

  Hi Christine,

  Welcome to the Microsoft community.

  According to the description you have provided to assign the read permission for the file in the shared drive.

  I advise you to check what are the rights that the user has to the shared folder. Please login as an administrator.

  a. right click on the folder, click Properties - Security tab - advanced

  b. click effective permissions, click Select, enter the user account, and then click OK.

  c. check what are count it the permissions the user has.

  d. If the user does not have sufficient permissions, click the permissions - changes to the permissions tab.

  e. click Add, enter the user name, click OK

  f. Select the appropriate permissions for the user, and then click OK.

  See: How to open a file if I get an access denied message?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  If you have any further questions on Windows, feel free to let us know. We will be happy to help you.

• ESXi host has not recognized the VM in the shared storage

  Hello

  We have installed ESXi host on our Blade Server and add the storage as a NFS storage device. There are in the NFS storage machine, Machine virtual files were there. But the ESXi host doesn't recognize any of the Virtual Machines.

  Could someone help me how to configure the file Vmdk to access via the ESxi host with out any resettlement.

  Kind regards

  Raghavendrachari

  If you go down each of the RHEl and VM1 files you should be able to add the vmx files to inventory

• Flex local differentiation and execution of the server of a SWF file

  Hello

  While developing, I run a Flex in FlexBuilder as C:\flexapp\bin-debug\file1.swf application

  The same swf can be deployed on a Web server and can be accessed http://localhost:8080/flexapp/file1.swf.

  thr is a way to differentiate it?

  Thanks and greetings

  mxvx

  sandboxType

• Windows MCE and connect to the shared directory of the server

  Well, I know it's more a matter of Microsoft than a Qosmio question, however, I think that it is better to ask here among others who can actually thought it out instead to pay $95 to Microsoft to answer a question which ought to be established somewhere anyway.

  I have a LAN in my house with several password protected Windows 2003 servers. I do not use a domain system because I've never been fond of roaming computers that belong to a domain.

  I prefer also to encrypt and password protect files on my computer using PGP disk password protect the machine itself. After all, my son likes to watch his cartoons on the computer and at the age of 3, type a password of 8 characters with high, low, numbers and signs of punctuation is a bit out of reach for the moment.

  So now I have bore you with all rebuttles to questions like "Why don't you do this rather", Let's get to the meat.

  Is anyway in Windows XP Media Center edition that when I connect to a shared directory on the server using Windows file sharing (SMB/CIFS), I can choose to save the password?

  Dialog box, I have in mind is the one marked 'Connect to' that appears to request a username and password when a UNC network path is entered directly in the Explorer address line or the path is traversed through "My Network Places" and permissions are insufficient for with the users currently logged in user name and password combination.

  This feature exists on XP Pro, but not on the House and I was under the impression that Media Center was closer to Pro home. If I can't find a solution to this, so I have to install XP Pro on the machine and not the Media Center extensions and this will make me really sad :(

  Thanks in advance

  Hello

  Well, I put t know how you want to watch the video files with the Windows XP Media Center from the file server, because I don t know if the WMC supports this feature.
  But if he finds an interesting site on a simple file sharing on Windows XP Home Edition and Windows XP Pro.

  Please visit this link:
  http://www.practicallynetworked.com/sharing/XP/filesharing.htm

  Hope you find the solution. Please let me know.

  Good bye

• Coldfusin MX 6.1 balance the load and access to the shared folder

  I hope someone can help me with this problem.
  I have 2 CF servers behind a hardware load balancer and the content is stored on a NAS device via a UNC share. Colfusion seems to access the files OK but every now and then, I get an error 404 who not disappear until I restart the coldfusion services.
  
  I have already disabled the caching and the problem persists.

  I'm having the same issue (among others) with CF7 balancing using Windows NLB. Apparently this is a known... bug there is a solution here, but it is not completely satisfactory if you get this on a lot of pages.

  http://www.TalkingTree.com/blog/index.cfm/2006/2/20/improper-caching-of-file-not-found

• SSD Solid State drives: The upgrade of the Ultraportable X 40 and X 41

  Need some advice!

  I think the upgrade of my ultraportable Thinkpad X 40 of very slow 1.8 "HDD with one module SSD (a DRAM unit, not a flash). These modules are available but expensive and rare.

  There are obvious problems.

  Windows is optimized for disk SSD hard & uses a lot of disk streaming - possibly reducing the performance gains expected.

  Some technical documents I've seen indicates (at least on Linux) that a writing activity can be deferred from RAM instead, and there are also a few options on where the constantly updated files could be moved. Maybe Windows can be twisted (a little) but I'm not getting my hopes upward.

  Assuming that I could not even find a loan to do the upgrade - repair-depot

  1: DRAM SSDS do not need constant battery? If so - how does X 300 new Thinkpad not to lose your data when you pull out main battery - a local battery on the SSD unit maybe?

  2: If the SSD consumes power even in stop - the current-draw would be low enough to be met by the local SSDS without pulling on the main battery?

  3: some SSD upgrades fail to deliver the expected - performance gains because drivers cannot be updated level - and ur stuck with the original e/s speed without worrying.

  Since the 40 X 1.8 "HARD drive runs very slow though - could I stand a good chance of significant performance gains?

  4: has anyone found to the main battery life drop - instead of improve it-due to an SSD upgrade?

  5: Here's a link treated showing the whole 40 X SSD upgrade procedure in the life-color www.think4d.de/nbb/x41_ssd.htm

  Any comment is appreciated.

  Rob

  SSD requires no battery power to keep these data.   they work exactly like the removable flash high-speed media.

  SLC drives are faster than MLC drives.   If you can afford it, download a SLC drive.

  battery life will be better, but marginally.   I have an SSD in my X61s and she has added about 20 ~ 30 minutes more travel time when you use a battery 8 cells.

  You can find the following useful lenovo's Matt kohut:

  http://lenovoblogs.com/insidethebox/?p=96

  http://lenovoblogs.com/insidethebox/?p=141

  http://lenovoblogs.com/insidethebox/?p=148

  http://lenovoblogs.com/insidethebox/?p=173

• Why the connection to a local database becomes lost when the network is disconnected?

  I use TestStand 3.1. I have a configuration database on the local drive and I use the option "Log on the Fly.

  The test takes 48 hours and I want to assure you that it will not stop if the network connection is lost.

  If I unplug the network before starting the test, fine. I can plug the network again while the test runs without problem.

  But if the network is connected and I start the test and then disconnect the network of recording on the fly will give an error.

  I narrowed down it to "New USE for database Logging" step in the SequentialModel.seq (process model). If this step is performed with the network connection then the rest of the test needs a network connection.

  Is it possible to avoid this error?  The point of all the local database was to avoid network problems.

  Thank you for your help.

  TDOT-

  I connect you always locally, please try to change it to "localhost\SQLEXPRESS" to see if you can log in and then see if the same problem as you disconnect the LAN causes previous saw.

• XW6400: SSD and HDD bluescreen

  My old HARD drive player has accident and I bought an SSD for my workstation, ADATA SX900 SATA III.  I put SSDS with and drive HARD Seagate Barracuda 1 TB SATA 7200 RPM, and at first glance, everything was ok, after 2 days, my pc has slowly gel and once has this blue screen appears. Now, I only use SSDS on workstation.

  How can I put those together to work properly?

  If your older HARD drive was the boot drive and crashed it somehow, you can trust data from the operating system that is located on this drive. As such, you must reinstall the operating system to ensure that all the data on your new SSD is indeed correct.

  All your other personal data should be recovered from a backup, or if you have only these data at the disk 'crashed', it must be checked in some way to ensure that it is also OK.

  However, you have not been clear what you mean by "I put SSDS with and HDD ' must clarify what you actually did or what you ment by this statement.

  Some older HP worksataions play well with some Sata III drives. You can read about these issues here and here.

  However, it is not clear whether the problem you have is related to the Sata II / Sata III issues such as discussed in the references above or related to the fact you can have cloned the old HDD to the SSD and then change the type Sata from AHCI ATA or AHCI + RAID in BIOS (which will result in blue screen unless the correct drivers are already installed).

  If I were you, I remove the old hard drives from your system and insert the new drive SSD (wiped using BDAN). Then, I'd install clean operating system using HP system recovery disks or preferably a Microsoft Windows 7 installation disc. All of this assumes that your XW6400 can handle first indeed the SSD SATA III

  Good luck...

  {

  Published:

  If you try to use the SSD as a cache for the HARD drive, then that; s another pair of sleeves and you should be clear on what you're trying to achieve

  }

• Add a hard drive (SSD) and move windows with partition

  Hi all

  I'm running Windows 7 on a new PC, I built.  Current record
  Intel i7 3.5 GHz
  16 GB OF RAM
  HDD WD 1 TB
  I added a 256 GB SSD and another 1 TB HARD drive to the system (they will be here Wednesday), and I'm looking for more articles on how to move the operating system for the SSD.  It seems that most people replace their HDD rather than add to their systems, so I'm not the answers I want exactly.
  I want to move the operating system for the SSD (and partition such that I can also install Ubuntu 12.10 on it, which was also a giant headache for me today... but this isn't the venue...)  while keeping many programs (games, mainly) and storage on the HARD drive.  I saw some instructables on how use a 3rd party backup/restore to move everything...  My question is, what is lost by simply reinstalling windows for the new SSD and then uninstall the old HD?  Is this all simply impossible to install two instances of windows on a single computer bootable?  Or that would result in all my programs does not not on the new installation?
  Otherwise, the windows7 install disc will allow me to reinstall it on the new drive as a replacement/installation action?  I was under the impression that everything would be kept and still accessible in old "windows" folder after such facilities.
  Thank you.

  Hi spectrum,

  Thanks for the reply.

  As suggested above, to create a Windows 7 image and save the image on the external drive (do not save in the new hard drive). Once you install windows 7 on new hard drive, you can restore the windows image 7.

• move VMs from the local shared storage

  We are running ESXi 4.1 with local storage that we did experiments with VMware. Close have 2 new purchased hosts with a SAN for the shared storage, hopefully, they will arrive at the end of January. I need to build a couple of virtual machines to take care of a few issues until our new VM environment is set up. If I create a new virtual machine on my host with local storage and that you want to move to new hosts and the shared storage the arrival of our new purchase, I guess I can do it with vMotion? Other methods too? Also, is there anything I need to worry as move us VMS local shared storage storage and a new host of ramifications?

  Thanks for helping a newbie, Tom

  You will need Enterprise or Enterprise Plus access to Storage vMotion. vMotion moves a virtual machine from one host to the host running but no storage.