report auto date/time

Similar Questions

• Display Date/time of the Client system

  Hello

  The requirement is to display the report run date/time in the result. (Report is developed using Excel template)

  Following syntax would give me time of the server where BI Publisher is installed.

  <? xdoxslt:SYSDATE('DD-Mon-YYYY_HH24:MI:SS')? >

  But, users would like to see their client system local date/time. There are several users running the report to several time zones.

  Any help on this is much appreciated.

  Thank you

  Mani

  before =)

  What is values of $_XDOLOCALE and $_XDOTIMEZONE, then you run the report with or without the user preferences?

  can you please check and share the result

  Add these variables to test the output of the report and please post on its values

  so, if the values of the variables are picked from the user's preferences, you can simply use

  If the values are the values of server beep then, as of ideas,

  -some additional report parameters (can be hidden) dynamic picking local / zone by other additional tables as user/local/zone schedule

  (intermediate table to store the preferences of users - custom extension)

  so, you for certain user values in this table, then you can set their default values for the parameters and pass to the generation of reports

  If missed - use beep server settings

  - or post SR to take over the team, already can be a useful way is existed

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• Auto date and time for London is1 day and coming 7hours. How can I change?

  Auto date and time for London is1 day and coming 7hours. How can I change?

  Original title: Date and time

  Hi JoannaHerriott,

  I suggest you to see the following link on the pendulum to the point options Windows 8.1.

  Windows 8.1 and Windows RT 8.1 clock options
  http://Windows.Microsoft.com/en-us/Windows-8/clock

  Post us the results after trying the steps above.

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Date / time setting HP Officejet 4620

  How to set the Date time & for the newspaper on a HP Officejet 4620 Fax?

  Date and time should be correct on the printer, because that's what the fax report reflects.   To change this, you must press the Setup menu (key), then use the arrows to navigate in 'Preferences' and then select the Date and time then tap ok .  Then use the arrows to navigate to the part of the date or time to change (hour/minute), use the number keypad to enter the desired time.

• How to display a report indicating dates emails were sent?

  I want to be able to see in personal emails were sent to a particular campaign.  How can I do this in ideas?

  No problem.

  1. When you are in this report, click on the symbol of the design.

  2. search for the attribute 'Email sent Date/Time.

  3 drag in the report on the left column.

  4 run the report.

  

  It should look like this:

  

  I hope this helps.

• Problem with Capture Date &amp; time change

  I just became aware of a problem with the Date of Capture use to is very strange. Initially, a brief explanation of the import workflow I'm used with jpeg image 6 iPhone since Lightroom Mobile was presented. The images appear in the section of times iPhone app Photo, and from there I transfer to a collection in Lightroom Mobile. Once the collection syncs to Lightroom on my Mac (running latest El Capitan), they sort by capture time and I make choices and rename images. I have a naming preset that adds automatically the date to all the images. Recently, I noticed that some of these images, but not all, have been appointed with the wrong date. I had traveled without my computer - only my iPad, and it was a month before the images have been synced on my Mac it was very obvious that the dates were incorrect. The problem may have expressed earlier, but if the date was off by a day or two he would not have been as sensitive.

  The problem occurs when I take pictures with the app in time of MomentLens company. I use the application because it is designed to work with instant attachment lenses and the case of the Moment (which makes no difference in time to capture problem).

  
  

  Once that the images are added to LR Mobile news for images show good capture date and time. That's when they images sync for LR (latest version) that the problem occurs. And this is not a problem of LR Mobile, such as changes of date and hour occur if images of the iPad are added to LR without using mobile LR (from the iPad to Mac with AirDrop). Looking at the EXIF metadata Panel in LR, images taken with the iPhone camera app show three dates: Date time Original Date time digitized and Date time - all the which three are the same. Show only pictures taken with the application of the time Date time, but it's the same as in the iPhone Photo app and in LR Mobile capture time. However, when I show info on imagine in Lightroom, the time that appears to capture the time is the time that the image has been synchronized (if it came at LR Mobile) or the time that the image has been added to the iPad over wifi. It is also the time that is added to the preselection of naming. Note that if I send a picture directly from the iPhone to the Mac with AirDrop the date and time is correct.

  For the life of me, I can't understand this anomaly. I did thorough Imaging tests, and it happens only with the application of the time - other camera apps do not exhibit this problem. Interestingly, LR recognizes both the time Soft, which is reported under EXIF on the range of software and the lenses of the Moment when it is used with the iPhone the Moment case.

  If anyone has any ideas I'd be pleased to entrance. Thank you

  The link to the file is Dropbox - Photo of the Moment

  I have just confirmed with Exiftool that the sample file does not EXIF:DateTimeOriginal, although it does not contain EXIF:DateTime.

  You can send the following to the current time, the EXIF 2.3 specification:

  

  

• reports of conversion time

  Hello

  When we export a column counter usage report date time and time is converted to a number 13-digit

  is it possible to have the conversion algorithm to convert this value to the date and time?

  Concerning

  Daniel

  Hi Daniel,.

  The timestamp format that you see is a time timestamp (specifically a millisecond time timestamp). You can convert timestamps using something like http://www.epochconverter.com, although this is probably not accomplish what you're looking for. You are wanting the reports exported to show the timestamp as hh: mm: MM/DD/YY? If you need to present this as a feature request, but I'll do some tinkering in my lab to see if I can't export to this format.

  EDIT: a few quick searches turned a few posts on the MS forums discuss conversion Epoch timestamps in Excel. This link seems to include a formula that converts the timestamp of the time in an excel-readable format, which can then be converted to a human-readable format by setting the cell a Date/time format.

  http://www.MrExcel.com/Forum/Excel-questions/49217-converting-normal-time-epoch-time-format-using-Excel.html

  I have not tested yet, since the posters in the forum do not specify whether or not timestamps with which they deal are in seconds or milliseconds, then it may require additional conversion to make it work if they deal in seconds with the provided formula.

  EDIT again: I took the formula that they suggested in the link above and it seems to work only on the timestamps that are provided in a few seconds. As the time stamp that we provide is in milliseconds, you need to split the time value of 1000 as a result of the following formula:

  = ((A1/1000)/86400) + 25569

  Where A1 is the cell that contains the time stamp. I have provided a screenshot of this formlua in action below. Let me know if you have any questions. Sorry if all my editing is spamming your e-mail address.

  

  Final cut (I promise): I pulled a measure of consumption in excel report, to see if it was possible to convert the entire column, and so far the best solution I have found is the following:

  -Insert a new column between #Time and DNS host name (I called him 'Converted time')

  -Select the line below the title and your entry form (B11 in my case)

  -Formula ' = ((A11/1000)/86400) + 25569 "(with additional info at the top of the rerport values time started to A11)

  -Press ENTER to insert the formula

  -Select the cell containing the formula

  -Double click on the box in the lower right of the cell, it will apply the formula to all of the following lines

  -Select the column, and then right-click to open the menu "Format cell".

  -Define the colum 'Time' and select the desired format

  I hope this information was useful!

  -Chris

  Technical Support Engineer | VCP4

  VMware Support Global Services

• Get VM create Date &amp; time

  Hello

  I'm looking to get the GET the VM code create Date & time.

  The reason why see you the same entries twice was because the events are collected in the VC and the script does not specify a specific cluster.

  The reason why I did not use the - parameter, the Get-ViEvent cmdlet entity was because not all the tasks are performed on a cluster but could belong to a weaker entity in the structure (for example, an ESX host).

  The following adaptation of the script will also include the NOMCLUSTER and the ESX host name where the guest was created.

  You could adapt the script to test on the name of the cluster or ESX host.

  The reason why the name of the cluster and ESX host are obtained in a heavy way is because there seems to be a bug in the references managed object the Get-ViEvent cmdlet returns.

  # How many days in the past to start from
  $start = (Get-Date).AddDays(-10)
  
  # The more days back, the higher this number should be.
  $eventNr = 9999
  
  $report = @()
  
  Get-VIEvent -Start $start -MaxSamples $eventNr | `
  Where-Object {$_.GetType().Name -eq "VmCreatedEvent"} | % {
       $row = "" | Select Date, Msg, User, Cluster, Host
       $row.Date = $_.createdTime
       $row.Msg = $_.fullFormattedMessage
       $row.User = $_.userName
  
       $t = New-Object VMware.Vim.ManagedObjectReference
       $t.type = $_.computeResource.computeResource.type
       $t.Value = $_.computeResource.computeResource.Value
       $row.Cluster = (Get-View $t).Name
  
       $t.type = $_.host.host.type
       $t.Value = $_.host.host.Value
       $row.Host = (Get-View $t).Name
  
       $report += $row
  }
  $report
  

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• How to display date / time in the browser console?

  How to display date / time in the browser console?

  You can set through the Options (gear icon) page in the Web Console (Firefox/tools > Web Developer).
  This applies to the browser console and the Web console.

  • https://developer.Mozilla.org/Tools/Web_Console
  • https://developer.Mozilla.org/Tools/Tools_Toolbox#settings

• How to save an email in .eml format and customize the name of the file, for example the file name will be ' date, time, sender, title "?

  It would be fantastic if when save my emails on my computer the file name can be customized to be something different than just the title of the message. As I suggested in the question, if it could be set up to be "date, time, sender, title" that would be great, much assistance during the passage of a .eml files between colleagues, or just simply organize your emails into folders. Is this possible and if yes, how does one?

  Install ImportExportTools then adjust the Options (see photo).

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• icon of camera on date/time/intro page

  I just noticed the camera down icon to the right of my iPhone screen.  I don't remember seeing before.  It's on the screen that appears after the phone has not been used for some time.  The page with the date, time and "slide to unlock" message.

  I can't figure out how to make the camera icon to go away and it's scary.  Clues?

  Thank you.

  The icon of the camera on the lock screen to take a photo without unlocking the phone. Simply drag the icon to the top and you will be behind closed doors, mode

• Internal battery / Date/time problem

  My NEX-6 will only keep the date/time information after I put it. He was dead when I got it, but after the normal battery charging to full and using the camera, whenever it is turned off, it forgets the time. I did some research online, which said it may take a while to recharge the internal battery, but I tried to charge for 24 hours straight, and using the camera frequently (as described in the manual) and doesn't seem to solve the problem.

  Once, after leaving unused for a few days, I noticed that he miraculously started saving the date correctly, even when it is off. This lasted about a week, but now he has lost the ability to keep the time again, and with the charge Jack did not set.

  Any thoughts? Apart from sending to Sony to repair?

  I tried the factory reset but that did not work. As I don't have a battery (and don't want to buy a second, in which case it is not the problem), looks like I'll need to come back for the service.