Satellite Pro 6100 screen size

Similar Questions

• Satellite Pro 6100: screen stays completely white or completely white

  I have a Toshiba Satellite pro 6100 running windows XP with SP2.

  For the last time, when you turn it on, sometimes the screen is totally blank and sometimes she is totally white.

  Must shut down the computer and try to reboot, sometimes several times until the computer starts correctly.

  Could you please tell what it is and how to fix it.

  Your answer will be highly appreciated.
  Thank you.

  Hi, Louis

  I think that we should first find out if the problem is related to the graphics card, for the internal display or on the part of the screen!
  In such cases, it s a good idea to connect the external monitor to the laptop.
  Check if the symptoms appear also on the external monitor.

  If the same thing will happen on the external screen so I guess that the computer laptop s video card is malfunctioning. But if the image appears correctly on the screen then the problem could be linked to the internal LCD display or the small part as FL inverter.

  Check it out

• Satellite Pro 6100 screen compatibility

  Hello!
  Is there a place I can check the compatibility of the screen for my Toshiba SP 6100?
  I have damaged a screen on one of my laptop and I would like to replace it.
  Thank you

  Hello

  The problem is that the Satellite Pro 6100 was delivered with four different views.
  14.1 ' (1024 x 768) color TFT display.
  15.1 ' (1024 x 768) color TFT display.
  15.1 ' (1400 x 1050) TFT color display.
  15.1 ' (1600 x 1200) TFT color display

  I found information that a P000334230 (LTN150X4-L01) screen is compatible with your device.
  http://www.getpartsonline.com/p000334230.html

  But I recommend to ask Toshiba service partner in your country for compatible screens.

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• Satellite Pro 6100 - code beep at startup

  Hi all

  Just picked up a 6100 Pro of the Satellite with a few problems.

  It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

  I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

  Ta

  Hey Buddy,

  To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

  You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

  If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
  Second hand spare parts you can get it on eBay s worth a try! ;)

• Satellite Pro 6100 - no idea on I need drivers

  Hello
  Well, I brought a Satallite Pro off ebay a few days back but I can't find what I need.
  I don't have any idea what the laptop except a Satallite Pro 6100 1.7 ghz, 512 MB ram mobile P4 CPU graphics card nividia.

  It would be great if I could know what laptop that I use to download the drivers, or at least be done in which I need only one I'd love to be able to change the brightness of the display by using the fn + F5 key and have the screen filling the LCD.

  Thank you.
  Mike.

  Hello

  I put t really understand your problem

  The European driver from Toshiba site provides all the important and necessary drivers for the Satellite Pro 6100.

  I assume you mean on the XP drivers
  Install all.

  In a first step, I recommend the installation of the common Module Chip Set Utility, display driver and then continue with the rest

  If you have installed SP2 please check the "Microsoft Windows XP SP2 update information" because some tools need to be updated.

  concerning

• [u] [b] Satellite pro 6100 + external projector problems [/ b] [/ u]

  Dear friends,

  I am trying to solve this problem:

  When I connect to the satellite Pro 6100 a 3rd party bCool XG1 DLP projector (a very good) I can see everything fine except DVD.

  I better explain: I can see the movies on the screen of the laptop, but nothing on the wall...

  Notice that I can look at these files directly on the screen, but on the wall...:
  MPEG files (Quick time Yes, but not WinmediaPlayer);
  AVI files (Quick time Yes, but not WinmediaPlayer);
  MOV files (Quick time Yes, but not WinmediaPlayer);

  DVD: (With Intervideo Windvd) Ok on the screen, but no output from the projector.

  Note that if I use the small window mode, the projector output image is correct except inside the window that is displayed in black (but is OK on the screen of the laptop).

  Who can help me?

  Thanks in advance.

  Stefano

  Hi Stefanohf,

  When you pass the output mode you have with keys FN and F5?

  also what settigs are set in the display driver? Right click on desktop, properties and parameters.

  go to advanced and nView. There should be active clone!

  Try this!

  Goodbye, Sam

• 2 GB card SD not recognized in Satellite Pro 6100

  Hello

  I got a new 2 GB SD card passenger high speed. When I insert into the slot of my Satellite Pro 6100 SD card, I see in the list of the Explorer, the new drive, but when I click it, it says: "Please insert card".

  The card works fine in my Pocket PC.

  What can I do? What is the size limit of card for the SD-Card-Reader inbuild?

  Any help is appreciated!
  Thank you!

  At the point where Satellite Pro has been offered, there was no 2 GB SD card and card reader has been tested with available maps only. If you're lucky, 1 GB card can be readable.

  I think you this card works fine in the other device. There is absolutely no problem with the card itself but old material or even driver for the card reader.

  Maybe in the next few days, someone will point out what card can be used with SP 6100.

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.

• How to remove the bios password on Satellite Pro 6100

  Hello
  I got this Satellite Pro 6100, I would like to install windows xp on it, somehow once I opened it, it's just a black screen with the password.
  I removed the hard drive and I was able to access it with my computer, means that the password is not for the hard drive, but rather the bios.
  What is the password of the bios? How can I reset it? I removed the Green battery which I think it is the RTC battery, it would make? How long should I wait for the settings to be reset to zero?
  Y at - it no jumpers to reset the bios... ?
  I don't know what my son used a password, so I need help with this...

  Is it possible to kill the bios settings... ?

  Thank you

  Hello

  It seems that the machine has a BIOS password. And it seems that there are only 3 options:

  1 Google for the procedure how to remove a BIOS password
  2. ask your son for the password
  3. send your machine to an authorized servicepartner and allow them to remove the password, which means that you pay money for it.

  Welcome them

• Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

  Hi all

  I'm new to this so hope I'm posting in the right place.

  I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

  The first problem is that the battery is fully charged, but the icon on the screen says 0%.
  He fled feeding okay and if you disconnect battery lasts for all time and a half.
  If I try to defrag it does not have enough power?
  So I have to defrag in safe mode.

  The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

  Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

  Oh am running windows at home.
  Thanks in advance.

  Eve x

  Update the BIOS and set the default values.

  You could try reinstalling the common Modules for Toshiba and energy savings.

  If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

• Satellite Pro 6100 cannot start - message PXE - E61 and PXE - MOF

  My dad just bought me a satellite pro 6100 for United off ebay and when I turn it on the toshiba screen comes up, followed by: PXE - E61 and PXE - MOF. as I am a total blank computer I have not a clue what to do! any ideas...? :)

  Hello Naomi

  Don t worry, it sounds not very badly. I think that you will solve this problem by changing some settings in the BIOS. ;)

  To my knowledge, this message appears when the LAN option has been fixed at the beginning of the boot order. So solve this problem to get into the BIOS (ESC and F1) and then change the order of Boot CD Drive drive HARD etc...
  Please set the LAN at the end.

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Where to buy drive HARD MK4019GAX for Satellite Pro 6100?

  Hi - I need a new hard drive for my satellite pro 6100, MK4019GAX part number. I have searched online but have drawn a blank. Any help would be appreciated. Thanks, Roy

  All devices, you can order from the Toshiba service partner in your country.
  As far as I know the MK4019GAX is a 40 GB ATA-100 HARD drive.
  You can also use an another 2.5 40 GB HDD.