Report Crystal restores do not properly on Mozilla?

Similar Questions

• Cannot complete the error of the system - 0 x 81000202 Volume Shadow Copy Restore does not properly

  original title: I need to restore my computer but my system restore fix doesn't work so how can I restore my computer if my dose of system restore does not work?

  When I start the system restore and try to restore at a later date, I get an error message if I tried to create a system restore point to see if I could and I get an error message, so my question is how can I fix my cuss of system restore I need to restore it 3 days ago or longer if needed

  I need to restore my computer but my system restore fix doesn't work so how can I restore my computer if my dose of system restore does not work?

  Hello

  The bad news is that once the system restore does not work properly, you must stop and restart the service. Unfortunately, this process removes all points of current restoration, in order to fix the system restore will remove your ability to access one of the existing restore points. It's a catch-22. By taking into account:

  (1) what is you receive the exact error message?

  (2) what is the nature of the question you are trying to fix with the system restore?

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• System Restore does not properly restore after creates a successful restore point

  I tried to restore my system from a restore point I created without problem. But I noticed the system restore ever restore anything completely.

  I have a Dell Studio 435MT XPSX running Vista Ultimate Edition and had to delete some files under Documents and c name\locat user settings and just screwed up by selecting the entire folder and not individual files. but the question is - anyone know how to get this system restore to work. In the meantime, I'll try again

  This cannot be found in the Windows section

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Check if the Volume Shadow Copy service is started or not. If it is started, then start the service and check if it helps.

  Follow the steps to start the service:

  a. Click Start, type services.msc in the search box and press ENTER.

  b. Locate the service: Volume shadow copy.

  c. right-click the service, and then click Start.

  d. try to run the system restore and check whether the problem is resolved.

  Method 2:

  Disable the security software and check if it helps.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still experience the problem, then try the safe mode system restore and restore you computer at the point when the computer was working fine.

  How to start the system restore in Windows Vista?

  Hope the information is useful.

• 3D photo restores do not properly since the upgrade

  I developed an application in labview 2012 and have recently updated until 2014.

  Since this upgrade, I have a problem with my 3d image rendered incorrectly.

  I am attaching the images as it is difficult to describe the problem. There should be 4 of robot arm placed on the corners of a gray box that is placed slightly above the ground. The image with the removed soil that shows the best, but it is obviously incorrect. Remove objects and textures can give better results in some respects, but the question is always present whenever I changed something.

  It seems that parts of models are not rendered or sections are not rendered in the correct order, but I'm not aware of all the properties change this.

  I tried to change the clip plain but documentation is very limited and I doubt that's the problem anyway as the middle of the image which is incorrect, the floor and the ends of the robots never seem to cut.

  I am running Labview Robotics 2014 and using the Robotics Toolbox to generate arms on Windows 7 64 bit with nvidea GeForce GTX 760 graphics card.

  Any help is appreciated.

  Thank you

  Nick

  I experienced similar problems with the rendering window. I feel quite informal and subjective, it is that the render window is something that NEITHER is not updated with the latest improvements in graphics cards, and having developers use real 3D image controls instead.

  I experimentally tested the 3D picture control and I can't see any advantage of the render window of performance compared to the 3D so image my, yet unofficial, impression is that image 3D controls are hardware accelerated now but it is not clearly stated in the documentation for LabVIEW.

  You can put a window on a façade of VI 3D and select in the context menu 'Fit control component' and create a window similar to the rendering window. It requires a little more programming, but you get a lot more flexibility for your application.

  If you are interested, join the Group Vision 3D!

• System Restore does not properly!

  I clicked on the system restore and received the following messages;  "SYSTEM RESTORE DOESN'T SEEM TO WORK CORRECTLY ON THIS SYSTEM.   and "a VOLUME SHADOW COPY SERVICE COMPONENT ENCOUNTERED YEAR ERROR INATTENDUE.»  CHECK THE LOG OF THE APPLICATIONS FOR MORE INFORMATION".  (0 X 80042302).  I have no idea what is the Application log or where it is located.

  Hello Steve Corbin,.

  This thread has been created in the Microsoft answers Site Feedback forum. Microsoft moderation team has moved this thread to the system repair and recovery Forum.

• the interactive report column order does not properly

  Hi all

  Can someone help me with this situation:

  Example:

  1)

  First of all, I created an interactive report with this simple query

  Select col_A 1, 2 Col_D of the double

  (2) later, I changed the query like this

  Select col_A 1, 1 col_C, 2 double Col_D

  But when I run the report of the new added column appears in the end?

  I already tried to rearrange the order of the columns in the browser menu, but the question remains.

  Any ideas?

  Thank you

  Hello

  Connection to generator of APEX. Run your page.

  Select the columns in the report menu action and save the default layout.

  Kind regards

  Jari

• System Restore is not working properly.

  -Your operating system: Windows Vista Business 32-bit
  -Security software installed: Comodo Internet Security, BOClean, Spyware Blaster, Super AntiSpyware, Malwarebytes AntiMalware
  -How you produced the problem: tried to run the system restore, but found that it does not work
  -How you tried to solve the problem: run Safe Mode system restore, but that does not solve the problem
  -Post Memory Dumps on crash if you encounter one: NA

  System Restore does not start in normal mode and gives the message "system restore doesn't seem to work correctly on this system. The RPC server is unavailable. (0x800706BA). After trying to open the Protection system, I get another popup message that says "there was an unexpected error in the property page: the RPC server is unavailable." (0x800706BA) if please close the property page and try again. "I do not know how this problem started, because it is my wife's cell phone. Several weeks ago, I ran Comodo Disk Cleaner, who was accidentally set to clean the Cache of Application Prefetch. I don't know whether or not it is what caused the problem. I can run the restore of the system, safe mode, but I can't tell if it is properly executed. I can run the system restore after the start-up of an ERD system restore and Vista gives a message that it completed successfully, but it does not eliminate the problem of system restore when you try to start it in normal mode. I have searced the Web for more information about these error messages, but have not found anything specific to my problem of system restore. I don't have a full professional Vista installation disc, only one disk of Vista update to update Windows XP. I would attach a screenshot jpg of these error messages, but it is not a way to do it. What can I do to get the system back restore functionality so that it runs correctly in normal mode?

  Hello larlyles,

  Please use the Microsoft Answers form.  I suggest you run the System File Checker tool.  To run the tool do the following: click Start > all programs Accessories > guest once the command prompt comes you type sfc/scannow

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I check my backup burned restore disc filled properly or does not?

  How can I check my backup burned restore disc filled properly or does not? He ran for 12 hours. My info is about 117 GB. He did not say, he just says no longer copy of backup disk in the process. I think 12 hours is a long time without a full review. When my hard drive failed after six months, my copy, I did not restore anything. More many times I tried to make a record to get an error just before the end. I want to be on the safe side. I don't have an installation disc since I bought this laptop pre-programmed Walmart. It is Vista Basic, so I'm out of luck if I have to redo the system and programs.

  Hello

  I suggest you follow the link and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-to-know-if-the-last-backup-was-successful/df6b4289-C623-480C-8CE7-3c59381fa5dc

• Classic report command SQL ORA-00933 not properly completed when you enable sorting

  Hello
  
  Oracle 11g r2, APEX 4.1.1.00.23.
  
  I have a few reports of type SQL Query (PL/SQL, returning the SQL query function body), so the source is as follows:
  

  begin
    return points_ui.get_points_query(:P0_FILTER_TYPE);
  end;

  Without no sort option, the report is made successfully.
  
  But I got the following error during a test to enable the sorting option for a column:
  

  ORA-00933: SQL command not properly ended

  I read about this error on the Oracle forums, and I saw it was a bug in an older version, but I thought it was fixed in 4.0.2...
  
  Any help would be appreciated.
  
  Thank you.
  
  Yann.

  The Order By clause and the column sort is kind of mutually exclusive.
  If your SQL in the report area has an Order By inside and you apply the sort order on the columns in the report attributes tab, then errors occur during execution.

  Concerning

• Other results: preliminary report does not properly during the first run in a loop

  I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

  Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

  If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

  The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

  You can see this described as stage 15 in the following link:

  http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

  Kind regards

• IPhone 6 does not properly?

  Lately my Iphone (6) was not properly.

  It it constantly restarts randomly, it is not allow me on apps (they crash). If I get on its connect outside and very slow. The screen is most of the time of freezing and glitching. It's really slow, sometimes too the point that I have to wait about 10 seconds for the lock screen comes on. Also when I open the texts, it does not allow me too click anywhere, so the only way I can answer is too open the app about twenty times or drag the text down and answer.

  It has been like that since then, time I plugged my charger of friends, next to the issue of texting (I don't know if this has nothing do with it). I tried to manually reboot several times, and I don't know what else to do. I plan to do a complete reset.

  Is anyone know a cause or a possible way to fix this?

  Try these...

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone: https://support.apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

  The next step would be to restore like New.

• Message: Cannot perform this operation because the default mail client is not properly installed

  I get the following error message:

  Cannot perform this operation because the default mail client is not properly installed

  Could someone help me please?

  Moved from the community involvement Center

  Hello

  You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

  The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Windows Live Mail is popular
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
  Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

  Windows Essentials help:
  http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

  You can access outlook.com via Windows Live Mail

  Set up an email application with Outlook.com - Microsoft Windows Help:
  http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

  Web-based e-mail services can only be made the default e-mail program in these 2 cases:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with the installed Google toolbar

  https://support.Google.com/toolbar/answer/34800?hl=en

  Don

• Message: "default mail client is not properly installed.

  I deleted several programs to get more system memory. I tried to restore my system to an earlier date, that date of was not available for a restore. Then when I click on the email toolbar icon I get an error message "could not perform this operation because the default mail client is not properly installed". What should I do to restore this ability? My OS is Windows XP Professional.

  Separated from the:

  http://answers.Microsoft.com/thread/3a1bb736-D208-406a-A8F8-e9dd2d8e73fe

  Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express. Also in Add/Remove Windows components, make sure OE is checked.
   
  
  Making OE the default e-mail client:
  http://www.oehelp.com/oedef.aspx
   
  
  For the links in the email:
  http://www.oehelp.com/oelnk.aspx
   
  
  And:
  http://support.Microsoft.com/?kbid=306098
   
  
  Restore OE to e-mail clients list in Internet Options
  http://www.dougknox.com/XP/scripts_desc/oe_client.htm
   
  
  If you have installed MS Outlook, see also #13:
  http://www.oehelp.com/OETips.aspx#13 
   
   
  
   
  
   

• professional XP System Restore does not

  My system restore doesn't work on my xp professional and I think that there are errors in registry. Can anyone help please?

  What does "does not?

  Why do you think there are errors in the registry?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  Remember that the system restore is not a time machine.

  Have you ever used the system restore to restore your system in the past?

  Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:

  Restoration incomplete. Your computer cannot be restored...

  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us?product=home&version=1

  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.

  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.

  Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.

  Give these ideas some consideration if they apply to you.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

  No matter what you use for protection against malware, I do so and then only begin to solve any problems:

  Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues.

  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.