Report error out after the backup

Similar Questions

• 0x8100000A error message when the backup fails.

  When my system tries to make a regular scheduled backup, I get the following error message:

  The backup has failed.

  An error has occurred. The following information can help you to resolve the error:

  The last backup set cannot be found. Make sure it is accessible and it has not been deleted. Otherwise, create a new full backup. (0x8100000A)

  How can I fix it?

  I use Windows Vista Home Premium on an HP computer. Thank you.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Unlike what you said here, Vista Home Premium does NOT have a backup of the computer.
  Read the info in the link above from Ms.

  You need Vista Business or Vista Ultimate or Enterprise Vista for backing up the computer.

  Make the backup file.

  See you soon.
  Mick Murphy - Microsoft partner

• 4.1 Data Migration tool - "error: failure of the backup of the configuration of the vCenter Orchestrator.

  While following this KB article, I came across an error.  I googled a bit but it is really not a lot on that.  This process took me the better part of a month to get to this day.  Now all I have to do is migrate my databases and settings...  However, as with everything else I came against from 4.0 to 4.1 (and building a new server to do), nothing seems to be going my way with this project.

  Anyway, I executed the script of backup.bat several times and each time, it failed in the same place.  The error given is "error: failure of the backup of the configuration of the vCenter Orchestrator."  The log file has been attached.  I rebooted, made sure that all VMware services have been arrested and still no joy.

  Any help would be great!  If this isn't the case, I'll have to make another call to the support team.  I played with VMware products for years and I've never had to call until this project came.  In this month alone, I opened 4 tickets!

  2010-09-24

  0723 EDT

  I'm almost certain that this can be ignored without risk, especially if you do not use Orchestrator.  I recently made a 4.1 migration to another server and got the same error - I had any issues at all.

• Application of VO becomes empty after the backup of the VO

  Hello
  
  Application of VO becomes empty after the backup of the VO. Can you please let me know why this is happening.
  
  Thank you
  HC

  Again create a new VO with the same query, save it and open the Jdev and let us know the result.

  Don't forget to win twice three times the time :)

  Thank you
  -Anil

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• After the backup hard drive cloning ARD launch

  OS: 10.11.6 (issue which happened on 10.11.5; update today to see if this helped)

  Recently, I reformatted my hard drive to correct some wacky partitioning I played with and cloned my rear disc of a direct clone of CCC.  Also, I recreated my restoration, installation of Boot Camp and installed Windows partition.

  Then, I went to launch the Office remotely and received the following error:

  

  As a logical person, I uninstalled the application by following the steps here, reinstalled and restarted... to get the same error.

  At this point, I have Google would be a bit and found mention of a permissions issue which was that other people having the same problem.  I checked my diary and here, I got the same errors:

  

  The strict solution seems to be to delete this folder and recreate it.  First of all, I did this by connecting to the recovery partition and deleting the folder 'C' via the Terminal I didn't so not disable controls system integrity.  This resulting no change on a restart, even after do it again, uninstalling Remote Desktop, and then reinstall.

  Then I disabled the system integrity (csrutil disable) in recovery and started to remove it when it is started.  I ran across the same as hoops above because it does not work all the time.

  I even went away so crazy just now as to delete the folder of higher level instead of just the subfolder 'C '.  That no longer works.  I changed the permissions on the folder to 777.  No change.  Changed the owner to my user account because he invites him for an administrator account.  No change.

  I went to the ARD support page and tried to present a real ticket, but it turns out that the ARD is not in the list of software that you can file a ticket on.

  I'm out of ideas.  No luck, can anyone provide some guidance?

  Hi, I have exactly the same problem the first time, I don't have the link with a CCC clone, but this morning (after a clean install because of this problem), I cloned my boot on a new SSD drive and this issue comes up with the clone. I reboot the original disc and ARD works on original, CCC is causing the problem, I made several clones with previous systems without problems, so it's probably a mixture of Capitan/CCC/ARD pure problem.

  I left a message of support to the CCC with a reference to your thread.

  hope for solution too... for the first time in my life of Apple that a problem needs a new facility...

• Start Windows after the backup time machine!

  Hey guys

  I have a MacBook Pro MGXA2 and I used time machine for the first time for the backup of the stuff, but after completing the course, my Windows boot option missing from the start menu

  Now I have MACINTOSH HD and a new option named: option to START EFI!

  in disk utility, I have a Macintosh HD and BOOT CAMP

  boot camp disk is always seen in utility dish! I have many pic in the bootcamp drive

  now the questions:

  How can I access inside the car of bootcamp to retrieve my files from disks in windows?

  is it possible to bring back the old windows boot camp player option to the boot menu?

  Thanx

  Welcome to Apple Support communities

  1. You can access your Windows partition with Finder. Simply open a new Finder window in OS X and the access to your Windows partition (often called "BOOTCAMP").
  2. Out of curiosity, what happens if you choose 'Boot EFI'? Note that newer Macs run Windows in EFI mode, so maybe Windows still works.

• Get the error when after the desktop is loaded: "search parameter was a problem and will be shut down."

  original title: definition error according to the office is responsible.

  the search parameter error message had a problem and will be shut down. This happens when startups while remaining on the desktop.

  Hello

  1. What is the exact error message you get?

  2. have you recently made changes to the computer?

  I suggest you to see the site mentioned below:

  Step 1: Safe Mode

  Start the computer in safe mode and check if the problem persists

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  If the problem does not persist in star safe mode the computer to the boot and see if the problem still occurs.

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

   

  I also suggest you to see link below:

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.microsoft.com/kb/308041.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Warning: As there is a possibility of loss of data after the upgrade on site I suggest you make a backup before the operation.

   

  Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

• Error 16 after the restoration of Photoshop Time machine

  My HARD drive died. After the restoration of Photoshop CS6 and Photoshop Time CC14 Machine again SSD or opens. I get the error 16. I restored adobe all the library files and all permissions are correct.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Satellite L30 - 10Y: error checking after the 2 GB of RAM

  Hello

  I have a Satellite L30 - 10Y ^ months ago I walking the RAM 1.5 GB by adding a card of 1 GB of RAM in the 512 MB card provided it worked well.
  I also have walking my son Hi-Grade lapto with exactly the same specifications of RAM that worked well also. So I decided to grade until my L30 10Y with another card of the same specification to bring it up to 2 GB as specified by TOSHIBA.

  I booted the computer to find Hay presto after the message following the start screen appears * "_the file is possibly corrupted.
  The file header checksum does not match the calculated checksum_ "* the computer then froze and I turned it off."

  Controls, I did tried two cards into the two slots without change, 1 card in both slots (an empty) works very well. Other card in the two sons of slots (works Fine) the two card slots in my computer (works very well) all three cards and 512 MB card in the configuration of the slots and cards (works fine). The three cards 1 GB in all configerations cards and slots to the error message and other times 1 long beep and 2 short.
  Yes, the cards have been installed correctly. Impossible to change something to do with the BIOS, even though it may be accssed. Cannot run dvd player although I can select.

  I went back to 1.5 GB and reinstalled all OS the drive recovery Toshiba try all over again the same results. Running windows Vista Edition family Basic, Bios is the last download. RAM is compatible. Cheep Hi-Grade son accepts that all RAM in all Configurations without sentence windows XP operating system.

  Can anyone think of anything either, I have not tried, or I just have to go and by a Hi-grade computer?

  Hello

  I read your announcement carefully, and it seems that you have checked that everything what is possible
  So in my opinion the two ram modules are not compatible set
  It's the only plausible explanation for this problem.

  AFAIK the L30 - 10Y needs DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

  Finally the short beeps are coming from the BIOS and it means that the error has been detected.

• PC keeps closing after the backup and restore

  Original title: "backup and restore".
  MP PC system is Vista Home Premiun 32 bit.

  This email is from my laptop.

  MS Internet Explorer on my PC gave me wrong yesterday. It would not start.  After several failed attempts, I followed the instructions to remove the update of IE 9. For this I made and re-installed. It did not work.  I then uninstalled IE 9 and IE 8, and re-installed IE 9. It still does not work.

  I decided to backup per 24 hours.  Since them my PC goes through a cycle off, restart and informing me that it configures updates with State 0% who never changes, after about 3 minutes, it stops and starts the process of starting again.  When the backup process started, I learned that I can't cancel it.  As restarting the round has now worked for 15 hours, what can I do to cancel it?

  Hello Dr. Ogheda,

  Thanks for the return of confidence.  I would suggest trying to perform a restore of the system to a point in time before this problem.  Please let us know status.

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Also, you listed above are you or you can get the recovery options in Windows Vista.  Have you tried to boot to the last known good Configuration?

  Recovery options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Error keyframe after the passage of my Windows English interface. How should I do?

  (I got a keyframe) error after the passage of my Windows English interface, I could save and open projects normally!   Unfortunately damaged projects still did not work...  But the news once is ok, and I hope that the mistake won't happen again! But the guys of http://www.premiere-pro

  

  Tengo estos errores.

  Post edited by: Kevin Monahan

  Reason: Next time create a shorter title, then put the text describing your problem to the next page.

  Hi C Del Producciones,

  Uninstall iCloud. See this forum post: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe

  Thank you

  Kevin

• Table is the mutation of error in after the update trigger

  Hello
  
  In all of my table, I have columns EDITDATE and EDITUSER. So whenever a table is updated I need to update these two fields with the USER and SYSDATE. For this I use a BEFORE UPDATE trigger. This trigger is activated, but I get "ORA-04091: table %s.%s is changing, function of triggering/can not see" error every time I update the table. I used this method in SQL Server. I understand that Oracle doesn't have to be the same as SQL Server but I do not know there is a way to do this. Do you know what it is?
  
  EDIT: Here is the Code of the trigger
  
  create or replace
  TR_LEGISLATION_CALCUL_AE RELAXATION
  BEFORE THE UPDATE
  ON LEGISLATION_CALCUL
  FOR EACH LINE
  DECLARE
  v_LEGISLATIONCALCULID NUMBER (10,0);
  
  BEGIN
  SELECT: NEW. LEGISLATIONCALCULID
  
  IN v_LEGISLATIONCALCULID
  FROM DUAL;
  UPDATE LEGISLATION_CALCUL
  SET EDITUSER_ID = UID,
  EDITDATE = SYSDATE
  WHERE LEGISLATIONCALCULID = v_LEGISLATIONCALCULID;
  END;
  
  Published by: Mikhail on 12 March 2012 23:54

  Mikhail says:
  Hello

  In all of my table, I have columns EDITDATE and EDITUSER. So whenever a table is updated I need to update these two fields with the USER and SYSDATE. For this I use the AFTER UPDATE trigger. This trigger is activated, but I get "ORA-04091: table %s.%s is changing, function of triggering/can not see" error every time I update the table. I used this method in SQL Server. I understand that Oracle doesn't have to be the same as SQL Server but I do not know there is a way to do this. Do you know what it is?

  EDIT: Here is the Code of the trigger

  create or replace
  TR_LEGISLATION_CALCUL_AE RELAXATION
  BEFORE THE UPDATE
  ON LEGISLATION_CALCUL
  FOR EACH LINE

  just put this in your before update (and not after the update as you mentioned) for each trigger line:

  BEGIN
  
  :new.EDITUSER_ID := UID;
  :new.EDITDATE := SYSDATE;
  
  END;
  

• Photosmart HP 7520: HP photosmart 7520 error remains after the new cartridges installed

  HP new cartridges installed, the error message "one or more cartridges appear to be damaged or missing" yellow cartridge is indicated, two new cartridges have been installed, without success.  Device has been turned on several times but the error message remains the same. The pocket of ink has been packed to remove any residue, did not help.

  Hi @gl40,

• modify the INSTANCENAME parameter after the backup database

  Hello

  our primary database is configured as follows:

  SQL > show parameter db_name;
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_name string prod01

  
  SQL > show the INSTANCENAME parameter
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  instance_name string prod01

  the corresponding backup database is configured as:

  SQL > show parameter db_name;
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_name string prod01

  
  SQL > show the INSTANCENAME parameter
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  instance_name string stbyprod01

  Now, the standby database must be enabled. Later, I want to change the stbyprod01 to prod01 INSTANCENAME parameter.

  The question now is: what does take to change the INSTANCENAME parameter? In fact the database pending will be

  already be activated and be considered and treated as a stand-alone database. The former primary database will be used no more.

  I would like to do the following:

  SQL > create pfile = 'initprod01.ora' of spfile;

  SQL > shutdown immediate;

  Oracle # > change the pfile file and change the stbyprod01 to prod01 INSTANCENAME parameter

  SQL > startup;

  SQL > create spfile = 'spfileprod01.ora' of pfile;

  SQL > shutdown immediate;

  SQL > startup;

  That should be all - from my point of view (I know that LISTENER.) ORA and TNSNAMES. ORA should be modified, too).

  If someone has already experiences with the INSTANCENAME parameter change but sees some additional configurations: Please let me know!

  Rgds

  Jan

  1. you can use "alter system set instance_name" to change the value of the instance name.

  2. you must do the following to activate the standby database (NOTE:-this is only for the activation of the backup database and not the passage to digital database)

  1 startup nomount

  2. change the base of Mount Eve.

  3. change the database activate the database pending.

  4. change the database open.