Report of the alarm in the vsphere 4.0 client definitions... possible?

Similar Questions

• Report on the configured alarms

  Hi all

  I am hunting for an easy way to export all the alarms and when they stock list stocks as well.

  Does anyone have a script close to?

  Really a combination of get-alarmdefinition and get-alarmaction I guess.  My powercli skills are a little weak so looking for some advice!

  The desired output is really a report indicating the status of the alarms in vcenter environment and detect configuration errors.

  Thank you all

  You can do something like this

  Get-AlarmDefinition |Select Name,Entity,Enabled,   @{N="Action";E={[string]::Join(',',(Get-AlarmAction $_ | Select -ExpandProperty ActionType))}}
  

  Note that this can be extended, depending on what you want to see in the report.

• Can't see resource calculate in the vRA, even if the vSphere Agent log shows a cluster

  I'm debating on the issue of whether the question should be minimal vRA installation requires anonymous authentication in IIS?  Or am I crazy?  I let you choose how to respond.

  This is a new installation of minimal vRA 6.2.1 new identity applice, vRA device and a single server Win2012R2 for all roles of IaaS. Gentle and the pre - req check tool was happy before you install it.

  However, when I went to add an endpoint yesterday for the vSphere Agent, I installed, I get the following error in the logs of vRA:

  Exception occurred retrieving the work of VRM: request the HTTP is unauthorized with client authentication scheme 'Anonymous '. The server received authentication header was 'NTLM, Negotiate. " Inner exception: the remote server returned an error: (401) unauthorized.

  A minimal installation uses anonymous authentication?  The pre - req just had check tool has that disable and use Windows authentication with the suppliers of the following order: NTLM, Negotiate.  Hmmm..., well although perhaps I'll activate anonymous and restart the agent of vSphere and see what happens.  I restart the agent and now I only get an error on the authentication and the following of the vSphereAgent.log seems to say that the endpoint is communication and a cluster of back of the vCenter:

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping sent successfully: [<? xml version = "1.0" encoding = "utf-16"? > < pingReport = "vSphereAgent-XXXXXX" CurrentVersion "6.2.0.0" = Nom_agent agentLocation = "VRAIaaSServer01" WorkitemsProcessed = "0" > < Endpoint externalReferenceId = "F86349A2-B8D7-4E17-9599-CC4F5C9E94B3" / > < nodes > < node = "ClusterName" type name = 'Cluster' identity="XXXXXX.mydomain.com/vCenter 5.5 Test/host/NOMCLUSTER" datacenterExternalReferenceId = "data center-21" isCluster = "True" managementEndpointId = "72195415-bdb6-4f7a-a3ac-92b9c4eca960" / > < / nodes > < AgentTypes > < AgentType name = "Hypervisor" / > < AgentType name = "vSphereHypervisor" / > < / AgentTypes > < / pingReport >]

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping completed report

  However, when I navigate to compute resources under endpoint, vRA shows no clumps.

  What happens one? I'm going crazy?   Well, maybe, but actually part of the problem is that calculation of resources are not displayed when you think, until you go to groups - fabric groups and then check the clusters that you would like to use vRA.  Now when you navigate to calculate the select cluster resources will appear.  {shakes head and face Palm}

  The lesson is, so don't forget the section group of fabric with the addition or subtraction of compute resources.  In addition, it is perhaps orphan computing resources in the database.  The following KB may help solve this problem.  VMware KB: deletion of an endpoint in vRealize Automation fails with the error: the endpoint is used by comput #...

  Hope this helps some that can run into questions adding vCenter endpoint computing resources.

  Hey Sean,

  OK on one of my IIS servers

  At the level of the server host level anonymous authentication is the SSO is enabled

  Move forward in websites - Site by default - Windows authentication is the only thing allowed

  For the repository - anonymous and authentication Windows are enabled

  for the vcac - forms authentication is the only permit

  For the WAPI - anonymous and Windows authentication are enabled

  Who help me?

• Report of the OPS / s

  We currently just bought a new storage and I'm looking for the best way to get reports of the IOPS / s of our virtual machines. Specifically, I want to get the OPS are / s for the last quarter on schedule from 07:00 - 18:00. We're currently on vSphere 4.1. A good majority are desktop view, that's why I want to look specifically at opening hours. Any ideas? Thank you!

  Here's a quick and powershell (really) dirty way providing the average and maximum read and write of IOPS / s over a period of days:

  $daysback = - 30
  $vms = get - VM
  "write-host (" {0, -40} ' t 1.8 t {2,8}} 't {3.8}' t {4,8} "-f"VM"," IOPS / s W avg ', ' Avg R IOPS / s "," W IOPS / s max "," IOPS R / s max ")"
  ; $vms | kind | % {
  $wval = (((get-Stat_$_-stat_"datastore.numberWriteAveraged.average"-Start_(Get-Date).adddays ($daysback) - Finish (Get-Date)) |-expandproperty value Select): measure - average - max);
  $rval = (((get-Stat_$_-stat_"datastore.numberReadAveraged.average"-Start_(Get-Date).adddays ($daysback) - Finish (Get-Date)) |-expandproperty value Select): measure - average - max);
  write-host ("{0, -40} ' t {1, 8:N2} t {2, 8:N2} ' t {3, 8:N2} t {4, 8:N2} ' f $_.) Name, $wval.average, $rval.average, $wval.maximum, $rval.maximum)
  }

  Output is as:

  VM W IOPS avg IOPS R / W IOPS avg s / s max IOPS R / s max
  VM1                                                1,96            0,67            7,00           31,00
  VM2                                                0,46            0,53            7,00           17,00
  VM3                                                7,57            7,66           52,00           73,00
  VM4                                                3,47            0,00             4,00            0,00
  [...]

  Remember that historical performance data are rolled up in the DB vCenter. So if you query data from the last 30 days as in this example, the values are made upwards of 2 average hours wrapped in the comic book. Especially the peak values can seem a little low then. Go to-1 (dailly, 1 minute averages) or - 7 (weekly, 30-minute averages) in this case and run it periodically.

  Also, here is a version that will assess only the values with a timestamp between 07:00 - 18:30:

  $daysback = - 30
  $vms = get - VM
  "write-host (" {0, -40} ' t 1.8 t {2,8}} 't {3.8}' t {4,8} "-f"VM"," IOPS / s W avg ', ' Avg R IOPS / s "," W IOPS / s max "," IOPS R / s max ")"
  ; $vms | kind | % {
  $wval = (((get-Stat_$_-stat_"datastore.numberWriteAveraged.average"-Start_(Get-Date).adddays ($daysback) - Finish (Get-Date)) |?)) {$_. "Timestamp.ToString () - match" (0 [7-9]: 1 [0-8]) :'} | Select - expandproperty value) | measure - average - max);
  $rval = (((get-Stat_$_-stat_"datastore.numberReadAveraged.average"-Start_(Get-Date).adddays ($daysback) - Finish (Get-Date)) |?)) {$_. "Timestamp.ToString () - match" (0 [7-9]: 1 [0-8]) :'} | Select - expandproperty value) | measure - average - max);
  write-host ("{0, -40} ' t {1, 8:N2} t {2, 8:N2} ' t {3, 8:N2} t {4, 8:N2} ' f $_.) Name, $wval.average, $rval.average, $wval.maximum, $rval.maximum)
  }

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• Create new report if the file size is too large

  The sequences I run in TestStand have the ability to generate large reports and I am looking for a way to start a new sequence of intermediate report if the file size exceeds certain limits, either start a new report every night at midnight.

  I am currently using TestStand 2014 and reports ATML 5.00.

  Here, any help would be greatly appreciated.

  mattb1 wrote:
  [...]

  I was hoping I'd be able to use some substitutions to get there, but it sounds a bit more complex than that. [...]

  There is no specific substitutions that solve this problem 'in configuration and only few implementation".

  The point is that you should follow the following steps:

  1. check the size of the file after writing a new segment of report data.

  2. If size > configured the file size, create a new file. Write a footer in the previous file, duplicate the header for the new file information and store the handle to file for all the previous files.

  3. once the test is complete, update the header in all files (remember: the header contains the overall result of the ESA.) This is known only when the test is finished!) and finalize all the report files.

  In the plugins default report, none of the above functions is applied.

  You want may also focus on 'File offline results' as a reporting mechanism. It might be easier to change things using this approach, unless you go the recommended manner: database.

  Norbert

• OfficeJet 6500 a: Office jet 6500 has printed a computer; produce reports of the printer

  My trusty old Officejet 6500 has suddenly cannot print from my computer.  When I try to print, I receive a FAX form on my screen.

  I printed the printer Hardware Information (2 pages) and the status of the report of the HP printer Assistant printer and they look great.

  How to print the Test Page from Windows printer and the Configuration Page of HP network?  I printed these years when I installed the printer, but I do not remember how I accessed them.

  Thank you for your help.

  It seems that the FAX is set as the default for your printer.  Try the following: click on start, devices and printers. Right-click on the Officejet 6500, and then select set as default.  At this point, it can come with a selection to the FAX or printer, select the printer.

• Need to create useful reports from the results of TestStand (.mdb) database

  Any help is greatly appreciated!

  We need create reports from the results of TestStand (.mdb) database.  I was not able to find much online.

  Details:

  In 2014 TestStand, we have configured to use Access database management system.  Otherwise, the database settings are default.

  These reports will be targeted to managers and engineers.  They need to show objects as:

  Which EHR past/almost?

  For each DEGREE, what past/a failed test?

  Thanks for all the suggestions!

  Because I couldn't find anything pre-made, I created reports from scratch using queries in Microsoft Access 2010.

• Method of Report.Save, the report has been made in a new path, but why is the empty file?

  Hallo,

  I have a problem to save the report file in a new way.

  In my code, I used the Runstate.Report.Save(newpath, overwrite, 0) method to save the report.

  And after the excution of the test, I can find the file of report in the right place, but if I open it, it's empty, I mean, there's nothing in this report.

  Someone has an idea? Where is the problem? And what I could do?

  Thank you!

  Cabio

  Hi Cabio,

  Before answering your question, I would like to let you know that you can configure the path to the report file in the report file path tab report options.  You can choose from several options, including by specifying an expression that is customized for the report path.  This will allow you to customize where the report is saved without changing code.

  If this isn't meeting your needs, the problem you're likely to have is that you access report until the report is actually produced.  To access the report object after it has been populated, replace the ProcessCleanup callback, which runs after the report has been generated.  (see the example of navigation PreUUTCallback for an example of substitution of a reminder.

  Note: if you use TestStand 2012, this method will not work unless you configure Report Builder for not using a new thread.  You can configure this option in the treatment of dialogue by selecting the checkbox options more results.  If you do not want to use a new thread, you can access the report by changing the sequence of AddUUTReportAndSave in ReportGen_ATML.

• SSRS 2008 SP4 - header or footer of the report contains the dynamic image does not change

  Hello

  Our version of Reporting SERVICES to current production is 2008 (not R2). And we have the problem that the header or footer of the report contains the dynamic image does not change accordingly.

  According to this hotfix, the problem has been resolved in the last SP R2 and we tested, it works.

  https://support.Microsoft.com/en-us/KB/2563216

  So we applied the latest SP to SQL Server 2008, however, the problem persists.

  However, we do not expect to upgrade the SQL Server 2008 to 2008 R2 for the moment.

  Guys have faced the same problem before and has an idea how to solve this problem on SSRS 2008 or any workaround?

  Thank you

  Kind regards

  Dan

  Hi Dan,.

  For assistance on questions related to SQL Server 2008 and SSRS 2008 SP4, ask your questions here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  https://social.msdn.Microsoft.com/forums/en-us/home?category=SQLServer

  Hope the information is useful.

• How to generate a report of the duration of the sessions remotely on windows server 2008 r2?

  Hello

  I have about 10 (local users, not domain) users who are loging in Microsoft Server 2008 R2 to use accounting and planning software (using RDS) remotely. I would like to generate a report for the time spent to see how many hours each of them had been registered. Ideally, I would like to see all of last year (2011). Is it possible to do? Thank you in advance!

  Stan

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• HP 8600 & 8610: Reports of the e-mail

  Is there a way to print a report of the HP 8600 printer and 8610 who will let me know when and to whom I have scanned the pages and sent by e-mail to the printer?

  Thank you.

  Welcome to the HP Forums @Paberle!

  I see that you are looking to print a report that will detail the emails that you send to the printer. The printer does not keep a log of e-mails sent.

  If it meets your needs, please click Accept as Solution button to mark your post as solved. Thank you.

• HP Officejet Pro 8610: How can I get a report with the total number of pages printed on my HP Officejet Pro 8610?

  The number of pages that print is so critical to a choice to use the "HP Instant ink Plan' or not, how can I find the total number of pages that I printed on my brand new (installed 2 days ago) 8610?  And if I can, there are a total of 'resettable' or working capital?  Don't see anything in the user guide and a search gives nothing usable on this blog.

  Wireless printer installed on an old PC with Windows XP SP3.  I also of course install with cable network but so far it works well on my home network without a network cable.  Is there any operating system, I also have a laptop Lenovo Vista on which I can install this printer.

  Please do not answer I can find total by counting the number of pieces of paper that I have.  Surely the inner workings of this beautiful machine must have the requested data as well as HP can say my consumption if I select the monthly plan of ink!

  This 8610 was a good buy (net $89,00 after the resumption of my six years, Deskjet J36xx) at Office Depot/Max who has of course influenced my decision to purchase.  So far, I am very happy with the print quality and speed, have not yet tried the scanner and will probably never use the fax machine since I have no land line phone.

  Thank you

  Harry

  Hello

  Article #2 of the report printer Ststus will tell you. Please try:

  Printer status report

  The printer status report to view current information about the printer and the status of the ink cartridges. Also use the report to State printer for you help to solve the problems associated with the printer.

  The printer status report contains also a log of recent events.

  If you need to call HP, it is often useful to print the printer status report before calling.

  To print the printer status report

  1. in the Control Panel printer display, press and drag your finger on the screen and then press Setup.

  2. press on printing reports and then tap Printer Status Report.

  Kind regards.

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE