BSOD caused by ntkrnlpa.exe

Similar Questions

• Kernel Mode Unhandled Exception caused by ntkrnlpa.exe BSOD

  Since a few weeks I had experienced the same BSOD initially upwards (to screen the user has selected and the screen of welcome and immediately after the connection.)

  Nirsoft using the blue screen view I could get this information from the .dmp

  062710-24819 - 01.dmp

  2010-06-27 18:41:52

  KERNEL_MODE_EXCEPTION_NOT_HANDLED

  0x1000008E

  0xc0000005

  0x82ff9238

  0x9aeddb74

  0x00000000

  Ntkrnlpa.exe

  ntkrnlpa.exe + 1eb238NT kernel & system Microsoft® Windows® operation SystemMi

  Microsoft Corporation6.1.7600.16539 (win7_gdr.100226 - 1909) 32-bit

  
  

  C:\windows\Minidump\062710-24819-01.dmp 115 7600

  I t seems to be caused by ntkrnlpa.exe
  
  
  What's more troubling, it is that, after the recent BSOD many of the setting to my programs have been reset for example parameter System Explorer were now rest at their default value.
  
  
  Also some services have ceased to be worrying most windows error reporting and service for Microsoft Security Essentials (I restarted the services).
  
  
  I don't think it's a virus problem that I ran three antivirus with MSE scans today and they are all clean.
  If it is relevant before I was experiencing a BSOD with ticalc.sys but I uninstalled all it applications on my computer.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  As you already know, you're in Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• BSOD Vista caused by Ntkrnlpa.exe Ntfs.Sys, random hal.dll, etc..

  A friend of mine gave me this computer about 2 or 3 months without a hard drive, thanks to a little research because I am not a professional of any kind, I knew that, because of the lack of a disk hard computer did not have an operating system. Having had an old computer just sitting with a 60 GB hard drive I connected on the computer I have now. After buying a new installation of Windows Vista Service Pack 2 disc, just well installed on the hard drive (which has been formatted to remove the old operating system, and all other things potentially buggy) and the computer has given new life. Following these time immediately, I downloaded and installed Microsoft security Essentials to protect my computer and a few other things to Rainmeter, steam, and that's it. Not even which in fact through the first day, however it has begun its random cycle without blue screening end who, after looking hard and troubleshooting, I've yet to find a solution for. Especially, it occurs whenever trying to read a chart highlighting / demanding the game, but also random triggers when nothing works and it's just sitting here. Ironically, I am writing this issue on the same computer in the hope I can find a fix to the Microsoft community.

  He still run Windows Vista Service Pack 2 (32-bit) and my computer is a PC of Compaq Presario SR5710Y so that you know what the material consists of.

  Here's my last 4 crashes

  Mini042815 - 04.dmp 28/04/2015-18:59:23 0x864e3aa8 0x8471ad78 0x000000e3 RESOURCE_NOT_OWNED 0x00000000 0 x 00000002 Ntfs.sys Ntfs.sys + 12012 NT File System Driver

  Mini042815 - 03.dmp 28/04/2015-18:23:07 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0 x 00000004 0x00000002 0 x 00000000 0x822d9abf ntkrnlpa.exe ntkrnlpa.exe + 4de7d NT Kernel & System

  Mini042815 - 02.dmp 28/04/2015-18:14:28 IRQL_NOT_LESS_OR_EQUAL 0x0000000a 0x006301be 0x00000002 0 x 00000001 0x822dab50 ntkrnlpa.exe ntkrnlpa.exe + 4de7d NT Kernel & System

  Mini042815 - 01.dmp 0x0000001a MEMORY_MANAGEMENT 15/04/2015-18:12:40 x 0 00005003 0xc0802000 00000197 0 x 0 x 77635101 hal.dll hal.dll + 770c Hardware Abstraction Layer DLL

  DJ

  If he continued to hang after re-installing windows, but before installing other programs, there is probably material.  I'd start with memtest

  2-Memtest. (You can learn more about running memtest here)

• Windows 8 BSOD caused by ntoskrnl.exe

  Hello.

  I get a lot of the dreaded BSOD lately.
  From the beginning I thought that it's nvidia drivers. Update of those fixed everything except a BSOD I get.
  Now I get the same BSOD, and it is caused by ntoskrnl.exe and playback memory problems.
  I've been all around you are looking for assistance and use of memtest86 without result.
  The Msinfo32 and .dmp files are located here: DMP.zip 
  Anyone have any idea what may be causing this?
  I couldn't find the RAM that I use in the compatibility table for the motherboard. So that's what I think may cause the problem.
  Any help is greatly appreciated.
  Kind regards
  Arve

  Hi Arve,

  All attached files of the DMP are the bug check IRQL_NOT_LESS_OR_EQUAL (a) .

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If we look at the call stack:
  
  STACK_TEXT:
  "fffff880 '0335caf0 fffff880' 06a4d817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 12fdbe10 00000005' 00001f80: nt! KeSetEvent + 0x2ad
  fffff880 '0335cb60 00000000 fffff880': fffffa80'00000008 fffffa80 '12fdbe10 00000005' 00001f80 fffffa80' 1458a6a0: MBfilt64+ 0 x 1817
  fffff880'0335cb68 fffffa80'00000008: fffffa80 '12fdbe10 00000005' 00001f80 fffffa80 '1458a6a0 fffff800' 9bc62d4c: 00000000' 0xfffff880
  fffff880 '0335cb70 fffffa80' 12fdbe10: 00000005' 00001f80 fffffa80'1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0: 0xfffffa80'00000008
  fffff880 '0335cb78 00000005' 00001f80: fffffa80 ' 1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0 fffffa80 ' 1458a6a0: 0xfffffa80'12fdbe10
  fffff880 '0335cb80 fffffa80' 1458a6a0: fffff800 ' 9bc62d4c fffffa80 '1458a6a0 fffffa80' 1458a6a0 fffffa80 ' 12fdbe10: 0 x 5 ' 00001f80
  fffff880 '0335cb88 fffff800' 9bc62d4c: fffffa80 ' 1458a6a0 fffffa80 '1458a6a0 fffffa80' 12fdbe10 fffff880 ' 02fc9f00: 0xfffffa80'1458a6a0
  fffff880 '0335cb90 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! ViPendingCompleteAfterWait + 0xc4

  Cannot load the image MBfilt64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  ^^
  Driver Realtek HiDefinition Audio (referred to as Creative Audio Driver file).

  If we run a lmvm on your:

  4: kd > lmvm MBfilt64
  start end module name
  fffff880 '06a4c000 fffff880' 06a5a000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Thu Aug 30 23:40:32 2009 (4A7267B0)

  ^^, Yours is dated 2009 ~ The most recent is AFAIK as early as September 2013, via - Realtek site

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  To update this driver as soon as POSSIBLE.

  -----------------------------------------------------------

  In addition, to provide peace of mind regarding your request of RAM. If you receive a card mother and they have a list of the RAM compatible in the manual, etc., this is called a QVL (qualified suppliers list). It is simply a list of RAM which has been tested internally and is PROVING to be quite compatible 100%. If the RAM is not on the list, it is not by all means, implies that the RAM will be inconsistent and cause problems. Actually today is very rare. Your RAM doesn't seem to be the issue at all in these accidents.

  Kind regards

  Patrick

• BSOD caused by ntoskrnl.exe - bug DRIVER_POWER_STATE_FAILURE

  Hi all

  I'd appreciate help with my laptop problems I don't know neither the cause nor the solution...

  For several months, my laptop refuses to close directly. I explain: when I want to stop it, any reboot my laptop and I have to stop him again so he can actually stopped. In addition, at each attempt to stop / restart, I have this incredible Blue Screen of Death for 15 to 20 minutes, then my laptop actually restarts. Once it has restarted, it works normally for 3 minutes and then freezes for a duratation ranging from 5 min to 40 min...

  In addition, since the beginning of these problems, my laptop detects no USB devices (mouse, external driver...)...

  Please help me, this situation is driving me crazy...

  My laptop is an Asus ux32v and runs on 64-bit processor - i5 3317U and Windows 8 (if it helps).

  Here is the link to my minidump files:

  https://www.dropbox.com/sh/ix3bf3v7aog2xz5/AAAcgX3yNBDWVAj5JXs9JNzSa?DL=0

  I tried to open these files with software like BlueScreenView but couldn't do much about it. What I realized is that it was caused by ntoskrnl.exe.

  Thank you in advance for your help!

  MS

  It is possible because you do not remove it completely.  He was always loaded into the current DMP file

  You do not update to win 8.1.  I'll wait until you do.

• X 200 Tablet - BSOD caused by tsmservice.exe

  Hello community,

  I got a Lenovo

  X200Tablet 7453BD5

  BIOS to. : 7WET71WW (3.21)

  I installed an SSD on my laptop. I installed Windows 7 top (more than 5 times), the old operating system is Vista on the embedded laptop computer.

  The software that is causing the BSOD is the 'TabletSVC' service / 'TABLET Service' with TSMService.exe performance. If I stop the service or even can not start it automated with Windows. I have no problem with blocking down (restart, hibernate, power off) within 15 seconds, the laptop is turned off.

  If the service still works I see probably blocking it to the bottom of the window for all feeled 10 Minutes until it shows me a BSOD.

  What I tried in the meantime. Installed another version of the Menu Popup Tablet-> [URL =http://support.lenovo.com/de/de/products/laptops-and-netbooks/thinkpad-x-series-tablet-laptops/think...

  Tablet of contextual Menu [url].

  I also installed the system step by step on the lenovo system update, so I saw what has caused the problem. Now I use a shortcut on my desktop that net stop 'Tablet of Service' and a stop. It is functional but not nice.

  Someone had / have this problem? And have a solution for this?

  concerning

  Norbert

  During this time, I got an update for the PM Driver on the windows update. After that, I tested the functionality of the service without stopping it to stop. Everything works fine now.

• Report of the BSOD caused by ntoskrnel.exe on the new generation.

  Hey guys! I recently built a new PC! Everything was fine for a few hours until I had a BSOD. For several days, I get several BSOD. When I use bluescreenview, he said each BSOD was caused by the driver notskrnle.exe (I have no idea what it is). Research in the topic suggested driver problems, corrupted files Windows or bad RAM. I've updated all the drivers that I know and I installed Windows 8 to own, twice. I could really use some help because this issue is frustrating.

  Here are my specs:

  Motherboard: AsRock H170 Pro4S

  RAM: 2 x G.SKILL NT Series 8 GB

  SSD: SanDisk SSD 240 GB more

  PSU: EVGA 750 GQ 80 + gold

  HARD drive: Seagate 1 TB HDD Desktop and WM10EFRX (that's my old HD from my old PC about 3 years)

  CPU: Intel i5 - 6600 k 3.5 GHz

  CPU cooler: Cooler Master 212 EVO Hype

  Graphics card: Sapphire Radeon NITRO R9 390

  Wi - Fi card: TP-LINK TL-WDN4800

  Here are the two most recent dump files:

  https://www.dropbox.com/s/zkmw8edn26pw192/022616-21828-01.dmp?DL=0

  https://www.dropbox.com/s/70gs9vxbkvzo4gx/022616-8828-01.dmp?DL=0

  I appreciate any help you have. Thank you!

  These are associated with atikmdag.sys ATI Radeon driver in Kernel Mode.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• BSOD caused by ntoskrnl.exe (and maybe hal.exe?)

  Hi all

  I don't have much experience in debugging BSOD minidumps so I turn for help. Attached all my files dump in time past. All caused my computer to turn off instantly, of course, sometimes it turns even off exactly when windows loads. From the little I know, I think maybe it's a hardware failure (0 x 124), but I'm not sure. Any help would be greatly appreciated.

  Here is the download link: MiniDump

  Thank you very much for any help!

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  drivers chipset on the site of the constructor/the system motherboard.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• BlueScreen caused by ntkrnlpa.exe.

  Hi all

  Im having a problem on my PC. It runs professtional windows 7 32 bit.

  the PC randomly freeze and blue screen when I use the USB port. in detail, I have to transfer data between the hard drive and usb storage.

  I tried to reinstall OS, test the RAM and HARD drive, motherboard via hirenboot but not found any question.

  This is the dump file.

  https://drive.Google.com/file/d/0B9S4fIXM9ulqRU95ZWhhUk81MW8/view?USP=sharing

  Please help me to fix this.

  Thank you very much

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.
  

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  
  

• DRIVER_POWER_STATE_FAILURE, caused by ntkrnlpa.exe, caused by the address ntkrnlpa.exe + debf0

  Hello

  My Windows 7 shuts down without notice.   It happened only when I'm not using the PC.  BlueScreenView gives the information set out in the title of this post.  Help, please.

  Thank you

  karlo88

  Sphinx Firewall control will allow you to do this with Windows Firewall
  It's free here: http://www.sphinx-soft.com/Vista/order.html

• Ntkrnlpa.exe causing bsd on win xp

  Hi all
  I get BSD on my HP presario v3000 laptop. Win XP.
  The mini dump refers to ntkrnlpa.exe to be the cause of a help please

  Debug version of Microsoft Windows (R) 6.8.0004.0 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\WINDOWS\Minidump\Mini101311-07.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \WINDOWS\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows XP Kernel Version 2600 (Service Pack 3) PUTS free x 86 compatible
  Product: WinNt
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x805540c0
  The debugging session: Thu Oct 13 21:08:38.937 2011 (GMT + 4)
  System Uptime: 0 days 0:05:24.496
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \WINDOWS\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  .......................................................................................................................................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007F, {8, 80042000, 0, 0}

  WARNING: Unable to verify timestamp for mssmbios.sys
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Probably caused by: ntkrnlpa.exe (nt + 60fca)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  UNEXPECTED_KERNEL_MODE_TRAP_M (1000007f)
  This means an interruption occurred in kernel mode, and it's a trick of nature
  that the kernel is not allowed to have/catch (bound trap) or that
  is always instant death (double fault).  The first digit of the
  bugcheck params is the number of the trap (8 = double fault, etc.)
  Consult an Intel x 86 family manual to learn more about what these
  traps are. Here's a * part * of these codes:
  If kv shows a taskGate
  Use .tss on the part before the sign colon, then kv.
  Otherwise, if kv shows a trapframe
  use .trap on that value
  On the other
  . Trap on the appropriate frame will show where the trap was taken
  (on x 86, this will be the ebp that goes with the procedure KiTrap)
  Endif
  Ko poster then the battery has been corrected.
  Arguments:
  Arg1: 00000008, EXCEPTION_DOUBLE_FAULT
  Arg2: 80042000
  Arg3: 00000000
  Arg4: 00000000

  Debugging information:
  ------------------

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************

  MODULE_NAME: nt

  FAULTING_MODULE: 804 d 7000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d00d46f

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 7

  DEFAULT_BUCKET_ID: WRONG_SYMBOLS

  LAST_CONTROL_TRANSFER: from 00000000 to 80537fca

  STACK_TEXT:
  f596939c 00000000 00000000 00000000 00000000 nt + 0x60fca

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT + 60fca
  80537fca?              ???

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: nt + 60fca

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntkrnlpa.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner
  ---------

  Any notice is very appreciated.
  Concerning

  Hello

  ·         Are you able to start tot eh desktop?

  ·         When exactly do you get this error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you perform the check disk on the computer and check if it helps:

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 2:

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

  To resolve this issue, follow these steps:

  (a) Insert the Windows XP startup disk in the floppy drive, or insert the Windows XP CD in the CD drive, and then restart the computer.

  (b) click to select all the options required to start the computer from the reader, if you are prompted to do so.

  (c) when the "Welcome" screen appears, press R to start the Recovery Console.

  (d) If you have a computer dual-boot or multiboot, select the installation that you want to access from the Recovery Console.

  (e) when you are prompted, type the administrator password. If the administrator password is blank, press ENTER.

  (f) at the Recovery Console prompt, type the following lines. Press ENTER after each line.

  CD system32
  ren ntkrnlpa.exe Ntkrnlpa.old
  Ren ntoskrnl.exe Ntoskrnl.old
  CD "c:\windows\driver cache\i386".
  Expand sp2.cab - F:ntkrpamp.exe c:\windows\system32
  Expand sp2.cab - F:ntkrnlmp.exe c:\windows\system32
  CD c:\windows\system32
  Ren ntkrpamp.exe Ntkrnlpa.exe
  Ren ntkrnlmp.exe Ntoskrnl.exe

  (g) type exit to quit the Recovery Console. Your computer will restart.

• Ntkrnlpa.exe repeated original BSoD problem

  Hi all

  I recently got a laptop Toshiba Satellite by a customer who complained only that he had "taken a turn for the worse. After playing with him for a few minutes, it was not long to bluescreen. What was fascinating, however, is that the system was unable to display anything on the screen when he stopped. There was a little blue at the bottom of the screen and a lot of pixels turn random colors.
  In any case, after rooting around the internet looking for what exactly ntkrnlpa.exe can do to cause a blue screen, I found a forum thread that says a rogue pilot could be the problem and that it is just to show up in the landfill as ntkrnlpa.exe. Remembering the glitches I've seen to every BSoD (except 1), I decided to download and install new graphics drivers. (The card is an ATI Mobility Radeon 3100) After that new drivers have been installed, I rebooted, launched Google Chrome, browsed Internet for a while and was greeted with an another BSoD. To be honest, I don't have never seen anything quite like this since I've been working on computers, and I'm stumped. I have this vague feeling that it may be a problem with the hardware for the following reasons:
  • The machine is from 2006-07.
  • The machine runs very hot even on a granite surface.
  • Even with the new graphics drivers, it cannot correctly display the blue screen error screen.
  Help? Thank you!
   
  EDIT: I can't get files to dump the machine since I'm working on a permissions problem, but I'll put the important information below (from BlueScreenView)

  Crash #1: Bug string control: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  • Bug check code: 0x1000007e
  • Caused by the driver: ntkrnlpa.exe
  • Plant address: ntkrnlpa.exe + 3e598

  Crash #2: Bug Check String: IRQL_NOT_LESS_OR_EQUAL

  • Bug check code: 0x0000000a
  • Caused by the driver: ntkrnlpa.exe
  • Plant address: ntkrnlpa.exe + 4df99

  Crash #3: Bug Check string: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  • Bug check code: 0x1000007e
  • Caused by the driver: ntkrnlpa.exe
  • Plant address: ntkrnlpa.exe + 3e598

  Crash #4: Bug Check String: KERNEL_MODE_EXCEPTION_NOT_HANDLED

  • Bug check code: 0x1000008e
  • Caused by the driver: ntkrnlpa.exe
  • Plant address: ntkrnlpa.exe + 23ae21

  Crash #5 (this one is from a different file, but I thought I would include it in any way): Bug Check String: IRQL_NOT_LESS_OR_EQUAL

  • Bug check code: 0x0000000a
  • Caused by the driver: C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. SYS
  • C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. SYS + 17289
   
   
   

  mpzeevi

  Altogether.  I suspect that it's symantec and it is much easier to remove (in most cases).  Some people are adamant about not removing it so I give the possibility of driver verifier.

  Symantec is a common cause of BSOD.  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

• BSOD due ntkrnlpa.exe + 98339

  Hello, im of the bsod and find nothing anywhere to fix it.

  makes 2 standard tests with verifier.exe and read the dumps with BlueScreenView, which tells me that the bsod is caused by the ntkrnlpa.exe + 98339.
  any help is appreciated!

  Hello

  Ntkrnlpa.exe is a component of Windows which means than anything else he has led astray.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) for a second or less
  the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from
  the wer files created by the Windows Error Reporting (WER) of the operating system component
  whenever an accident occurred. AppCrashView also allows you to easily record the list of accidents
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Ntkrnlpa.exe causeing blue screen

  During startup, I get bsod I reinstalled (reformated to factory settings) family Vista premium done all THE updates and still get bsod, how can I download my minidump if you see?

  ==================================================
  Dump file: Mini111510 - 01.dmp
  Crash time: 11/15/2010 07:44:07
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check Code: 0 x 00000050
  Parameter 1: 0xffffffd4
  Parameter 2: 0x00000000
  Parameter 3: 0x81c60d68
  Parameter 4: 0x00000000
  Caused by the driver: ntkrnlpa.exe
  Caused by the address: ntkrnlpa.exe + 9838d
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini111510-01.dmp
  Number of processors: 2
  Main version: 15
  Minor Version: 6002
  ==================================================
  

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

  BUGCHECK_STR: 0 X 50

  NOM_PROCESSUS: #.

  STACK_TEXT:
  969e926c 81c95dd4 ffffffd4 00000000 00000000 nt! MmAccessFault + 0x10a
  969e926c 81c60d68 ffffffd4 00000000 00000000 nt! KiTrap0E + 0xdc
  969e9318 81e7ed09 0001fea0 969e96a4 14 d 92138 nt! ExpGetLookasideInformation + 0xc4
  969e96c0 81c92c7a 0000002d 8163d 160 0001fea0 nt! NtQuerySystemInformation + 0x1d0d
  969e96c0 81c 91615 0000002d 8163d 160 0001fea0 nt! KiFastCallEntry + 0x12a
  969e9748 8224b75e 0000002d 8163d 160 0001fea0 nt! ZwQuerySystemInformation + 0x11
  969e9aa8 8224a9ff 00000000 00000000 969e9ac8 ksecdd! GatherRandomKey + 0x2da

  Maybe your RAM is damaged. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors. If it detects errors, replace the faulty RAM.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information DRIVER_POWER_STATE_FAILURE. The error code is 0x0000009F (0 x 00000003, 0x86f692e0, 0x86f692e0, 0x865a6598). BlueScreenView.exe, I see that the root causes are hal.dll + 997f and ntkrnlpa.exe + f5b28. So far, I've had 14 accidents. I run the driver verifier and the causes are hal.dll + 726c and ntkrnlpa.exe + 2ea5a7 windrvr6.sys + 0. Any help is appreciated! Thank you.

  Timothy

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.