Report of the IR - repeat the header problem

Similar Questions

• in the header problem report the actual display Max and Min...

  Hi guys,.
  
  I have the following problem.
  
  1. I have a multi selection prompt where you take 2 years.
  
  2. I have the following columns. Year, month, Exp, calc YEAR (max), calc (min)
  
  3. I need to get the months max and min across all lines. So far, I tried MAX, MIN, RMAX and RMIN without success. However, it is not picking up along all lines. For example,.
  
  2001 1 100050 2001 2001
  .....
  2002 1 244005 2002 2002
  
  I'm sure it has to do something with my aggregation in the computed column, but not quite sure where exactly.

  c max (max (year)) and min (min (year))

  :)

• Repeat the header and button problems

  I've been finding dig me deeper and deeper into Livecycle lately, our office is trying to convert all of THE forms in pdf format. This was a bit of a puzzle to me.

  I finally understood how automatically scroll to the next page, a week or two ago (to my GREAT relief) the text. So now I'm on the next confusing problem.

  I need to have a header to repeat from one page to another, as well as data that the user enters in the fields. I tried to accomplish this by placing the fields I want to be repeated on a Master Page. Which certainly makes them repeat as I wanted-, but the inputs do not seem to go from page to page. How to make this happen?

  My second problem, I ran in here it is - I have a table of contents page I need essentially "duplicate", according to the needs. For example, they run out of spaces and need more, so they click on the button to add another page to the table of contents - all other pages, moving down from there. This is a pretty important thing for this form to do so, as later I'll add more pages that need to do the same thing. It would be great if I could reach (with a minimum of programming), because he would smoke less our separate 21 form into one - to get rid of the need to keep track of page numbers ourselves and by reducing the amount of data that must be re-entered.

  I appreciate any help! I have also attached what I have so far help along any suggestions.

  I'm glad that the first problem is resolved.  You can actually apply the same principle to make a whole page repeatedly.  If you the repeatable subform is the size of the entire page, whenever she repeats a new page will be created.

  As to why it doesn't work, my guess is that you are not working with a dynamic PDF.  There are three types of files, you can process in the designer: a static PDF, a dynamic PDF and an XDP (XML data package).  Dynamic PDF, that's what you want, then when you save your file, make sure that it is like that guy.  You must also enable dynamic features in the properties of the form.

  Go to file > form properties.  In the 'Default' tab, set the PDF Format to "Form XML dynamic."  In the "Overview" tab, set the Type of Preview for 'Interactive form' and Preview Adobe XML form as 'Dynamic XML form.'  This will allow the form return to PDF in preview mode PDF dynamic.  It is a common thing to have to deal with.

  Try this, hope it helps.

  Ryan D. Lunka

  Cardinal Solutions Group

  [email protected]

• First group title below displays under the column headers using the model 23 classic report with the help of repeat titles on break

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  
  When I look at firebug code I saw that all the tables but the first, the break line is included in the last line of the previous table, so I can see how it did not work for the holidays since.

  I have tow questions.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Example of a question can be seen at apex.oracle.com at home

  Thank you

  Brad

  Roadling wrote:

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  The Standard report template definition in issue 23 contains thead and tbody elements:

  Before the column header

  Column title template

  #COLUMN_HEADER#
  

  After the title column

  After the lines

  
  
  
  
  
  
  #PAGINATION#
  
  
  #EXTERNAL_LINK##CSV_LINK#
  

  This is intentional, the best practice for marking up HTML tables. What is not expected is the problem that arises when this model is used with the break of repeat titles on break formatting option. The repeated headings result table consisting of soup of tags containing several poorly constructed tbody and thead, which is not valid elements.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Create a copy of the report model Standard in Standard (break formatting) for use with reports of the break, remove the thead and tbody definitions of template tags and the breakdown of the reports to use the new model of change. (Or, if you use mainly break reports using the Standard template, keep the tags in the copy and remove them from the original in order to minimize the number of reports, you need to change.)

  Personally, I would create a report model of line custom to break complex reports in order to be able to have complete control over the structure and presentation.

• RTF model - repeat the header in

  Hi Experts,
  I am facing a weird problem where, in a particular model, the first part of the heading text should be repeated as part of the report, and then a table header should not repeat that in the case of folders under it. Could you pls help me?
  
  Thank you
  Swarna

  Did you send the updated files.

• Repeat the header information of level in all pages

  Hi friends,
  
  I am developing a RICH model for a kind of Oracle IN report.
  If the elements of the line extends to the next page, the header information should now shown on the next page as well.
  
  I am facing problems repeating the level header information in all pages.
  I put the table header property to repeat on all pages. Still I don't see the header on the next page.
  This is what I use in the header tag group:
  <? for-each-group: G_VEHICLE; / VEHICLE_NUMBER? > <? sorting: current-group () / VEHICLE_NUMBER; ' ascending '; data-type = "text"? >
  
  Can anyone help on this please.
  
  See you soon,.
  Krish

  Hi Krish,

  I sent you the updated model according to your last thread. Please take a look.

  Thank you!

• Duplicate the header values in the report to Word when using Add array of report VI

  Hello

  I have a problem of duplication of the header when I use the Table add to Report.vi. I'm trying to generate a report to Word using a template, and I want to add a specific table in a good place with a bookmark.

  In parts attached: there is a screenshot of the VI and generate the result of the table in word.

  It's very strange because when I run the example in the table attached to the report everything works.

  http://forums.NI.com/T5/LabVIEW/report-generation-MS-Word-table-bug/TD-p/1605170

  http://digital.NI.com/public.nsf/allkb/4041ECB5D02BA57D862579A00002FE8D

• SSRS 2008 SP4 - header or footer of the report contains the dynamic image does not change

  Hello

  Our version of Reporting SERVICES to current production is 2008 (not R2). And we have the problem that the header or footer of the report contains the dynamic image does not change accordingly.

  According to this hotfix, the problem has been resolved in the last SP R2 and we tested, it works.

  https://support.Microsoft.com/en-us/KB/2563216

  So we applied the latest SP to SQL Server 2008, however, the problem persists.

  However, we do not expect to upgrade the SQL Server 2008 to 2008 R2 for the moment.

  Guys have faced the same problem before and has an idea how to solve this problem on SSRS 2008 or any workaround?

  Thank you

  Kind regards

  Dan

  Hi Dan,.

  For assistance on questions related to SQL Server 2008 and SSRS 2008 SP4, ask your questions here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  https://social.msdn.Microsoft.com/forums/en-us/home?category=SQLServer

  Hope the information is useful.

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• Check box in the header of the classic report: select all the report Archives

  Hi friends,

  I use Apex 4.2 worm.

  I've created a classic report and create the check box (apex_item.checkbox (1), EMPNO, 'DISABLED' tick,) in this report.

  My Code

  Select * from)

  Select

  apex_item. CheckBox (1), EMPNO, "DISABLED" tick.

  "EMPNO', 'ENAME', 'JOB', 'MGR', 'HIREDATE',"SAL","COMM","DEPTNO. "

  from EMP)

  where)

  InStr (upper ("ENAME"), upper (nvl (: P6_REPORT_SEARCH, "ENAME"))) > 0 or

  InStr (upper ("JOB"), upper (nvl (: P6_REPORT_SEARCH, "JOB"))) > 0

  ) and

  (nvl(:P6_ENAME,'0') = '0' or ENAME =: P6_ENAME) and

  (nvl(:P6_JOB,'0') = '0' or JOB =: P6_JOB) and

  (nvl(:P6_MANAGER,'0') = '0' or MGR =: P6_MANAGER)

  and

  (nvl(:P6_DEPT_NO,'0') = '0' or DEPTNO =: P6_DEPT_NO)

  I need to create the checkbox in the header of the classic as tabular report where if I click in the header box then all archives should be checked.

  How can I do this with classic report.

  If you want to see this issue in the workspace, then you can use the workspace details below

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Page no.: 6

  Thank you

  Hi Maxence,

  The above problem is solved. Please check the same.

  I added the following code in the header of the first column:

  NOTE: I used Carl Backstrom solution for this: Blog of Carl Backstrom: Mini check all HowTo

  But this solution works only when the first column in your report / table is a checkbox.

  If you have more columns rather than the first column where you want to check and uncheck all the features then follow the solution of Jeff Kemp:

  http://jeffkemponoracle.com/2012/11/15/select-all-Unselect-all-checkbox-in-interactive-report-header/

  I hope this helps!

  Kind regards

  Kiran

• Call Javascript in the header of the report of the Apex

  Hello
  I have a javascript function in my html page header I would like to call from my report using a link. I tried to configure the URL of the link column in the report attributes box: javascript:send_sub_email('sharon'). It does not work. My other problem is to know how to pass the value of column of the report to the javascript function. Does anyone know how to do this? All the suggestions and help is greatly appreciated.
  
  Sharon

  Sharon,

  You should have your JS function in the header section of the HTML Page...

  Lets say your a column named 'EMP_ID' report and now in your report, change the link column and the target set in the updated URL section form URL and after

  javascript:send_sub_email('#EMP_ID#');
  

  So when the user has clicked on the link, it'll pass respective EMP_ID to JS function

  See you soon,.
  Hari

• Repeat the header on each page

  Hello
  
  I have a problem to repeat the header on each page.
  
  I tried to use the following options through the other threads on this topic. But it did not work.
  
  1. in the properties of the table, repeat the line header at the top of each page
  2. header information <? Start body? > body <? end body? > footer
  
  Please help me...
  
  Thank you
  Shashi

  Hey Shashi,

  I sent you the modified model.

  Let me know if it works :)

  It will be ;) I tested it

• Problems by displaying the name of the site in the header tab.

  In the header displays the word "Connection" instead of the site, although the site is already open.

  If the extension of FoxLingo is the cause of the problems then you must disable or uninstall this extension until the developer has released an update that fixes it.

  You can also temporarily downgrade to the 2.7.3 previous version.

  • FoxLingo: https://addons.mozilla.org/firefox/addon/foxlingo-translator-dictionary/versions/2.7.3

• I just installed Firefox 6, and the report does more - the same problem you had with Firefox 5. What is going on?

  You prompted me to install Firefox 6 tonight, because it addresses serious security/stability problems, but when I did this, the report icon has disappeared from the address bar. Reinstall the latest version of the report was corrected not it.
  It's the same thing with Firefox 5 a few months ago, and it has taken report per week to develop a new compatible version.
  Why this happened again? You not check this before launching new versions? Or, why at all not least we warn in advance that some programs will not work for X days? I prefer to be without the latest Firefox for a week or two, and no report - not least because that my Bank, I have to use the report.

  Please advise as soon as POSSIBLE.

  Malcolm Oliver

  This is the link in the message that Trusteer sent me today. I have updated and works great so far.

  Please contact the Support technique Trusteer.

  We are pleased to inform you that a version of the report that supports Firefox 6 has
  been released and is now available for download in the following link:
  http://download.Trusteer.com/NkuiAcruiKc/RapportSetup.exe

  Please be sure to restart your computer once the installation process
  completed.

  Please note: this version of the report is currently a beta version. We'd
  appreciate any comments you may have about this version.

  If the report indicates that the version of the report that you are trying to install is older
  than the version already installed, follow these steps:
  1. choose uninstall report
  2. When prompted, select 'delete all user settings '. Please, assisted by the
  suite of image: http://consumers.trusteer.com/files/images/uninstall.jpg
  3 reinstall the report from the link above.

• How to report the BIOS problem?

  Hello

  is it possible to report the BIOS problem so that a person of HP it will read and the problem will be solved if all goes well?

  To be concrete, there seems to be problem in BIOS F.02 installed on HP Mini 5103 causes of freeze if it has plugged the USB key with 'recursive partitioning' at startup. As a result, it is not possible to boot from live USB which was created from some ISO hybrids (e.g. direct ISOs of OpenSUSE recent). Since there are not many options to install the system on netbook, I think it is serious problem. My previous netbook Lenovo Ideapad S10 - 3 and also my work laptop and desktop have no problem to start with the USB stick containing "recursive partitioning", so it's certainly a problem (hopefully not feature) this concrete machine/BIOS.

  Thank you

  That's ok on the Bravo, I did nothing to help you again.  This link is for questions of security, but it is also for the firmware, so you can get away with sending them a note here:

  https://h41268.www4.HP.com/live/index.aspx?QID=11503

  - Or call them.

  http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1