Report on the use of the VM UC of "user created host group.

Similar Questions

• What is the password of a user created by impdp?

  Can someone tell me what is the password for a new user created by impdp?

  Hello

  When you remap the schema, the password will be unknown. I'm sure that the reason for this is because the password is a hash of the schema name and the password in clear text. If you imported the schema without renaming the schema, the password would be him, but since the modified schema name and the hash of the combo has not changed, then when the connection is attempted and the hash of the new scheme with the game of wontch original password. The only way that a remap_schema is allowed is if you have privs, so the only way I know how to solve this problem is to:

  change new_schema user identified by new_password;

  that requires administrative privileges.

  Dean

• Need to create useful reports from the results of TestStand (.mdb) database

  Any help is greatly appreciated!

  We need create reports from the results of TestStand (.mdb) database.  I was not able to find much online.

  Details:

  In 2014 TestStand, we have configured to use Access database management system.  Otherwise, the database settings are default.

  These reports will be targeted to managers and engineers.  They need to show objects as:

  Which EHR past/almost?

  For each DEGREE, what past/a failed test?

  Thanks for all the suggestions!

  Because I couldn't find anything pre-made, I created reports from scratch using queries in Microsoft Access 2010.

• set a path to the report manually by using < clientfiledir >

  Hi all

  I'm pretty new to teststand so please forgive me if this is an easy question.

  BACKGROUND

  I'm running a sequence (TestGroup) that contains several sequences (tests) that work as a new execution.  It allows me to produce an individual report for each test (the top-level sequence produces a summary report only).

  QUESTION

  I want each of the reports to be stored in a single folder. I have setup report options to calculate the path of the report by using the following expression "\\Reports\\\\SummaryReport [] []".".

  This works very well for the top level, but that this also applies to the subsequences path is recalculated and is different from that of the upper level.

  CURRENT SOLUTION

  I'm currently moving the report path as a parameter to test sequences, but I find the value of the macro (from the sequence of high level) to build the report path.  Can someone tell me how to get this?

  Another solution is for me to take the path of the current report and the name of the file of this band.  It's a better solution?

  Any help would be great.  Thank you

  G

  Hi Jack,

  I use a whole test sequence (seq) group and a running each of my tests as a new execution.  This means that I can apply a different template to each test (which is needed to support the old style of the previous tests developed by my client) and produce a report of individual test for each test.  Then I clear the list of results when the report was drafted and replace it with a link to the report for the test (I hope that this reduces the risk of running out of memory on long series of tests).

  Each of my 'tests' is indeed a full sequence.

  I was hoping to use something similar to macros to move the report path to each of my tests (or model for the test), but have not been able to find these values anywhere in the report options window.  Ultimately I have to now take the string generated for high level sequence 'group' and make a formatted string and then pass it as a parameter testing (an another headache that had some problems).

  I'm not really a fan of this and think it should be possibel to configure the report options different for each model, that I had to do it manually by hardcoding stuff like path .xsl etc names.

  can someone tellme if it seems like the right approach?

  G

• I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Buy Visual Studio 2008

  I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Can I buy Visual Studio 2010 with MSDN Essentials and then download and use Visual Studio 2008

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Thank you for visiting the Microsoft answers Forum.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums
  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

  I hope this helps.

• I use the SAGE software but can't view or print all reports since the upgrade to Windows 7

  I use the SAGE software but can't view or print all reports since the upgrade my laptop to windows 7.

  Is there something in windows 7 that is in conflict with SAGE software and if so is there a download available that will fix it

  It is common for accounting packages to must be run as an administrator (essentially because the companies are too lazy to properly program).

  Try first - then approach wise for assistance.

• Report on the use of modules in EBS

  Hello

  We have 500 users who use different modules of Oracle ERP.

  I would like to know if I can get a usage report or the Script to know how many users have access to each module

  Kind regards

  Mahesh

  Here's the SQL code for a list of users with assigned applications.

  SELECT DISTINCT

  FA. APPLICATION_NAME

  FU. USER_NAME

  Of

  FND_USER_RESP_GROUPS_ALL FURGA,

  FND_USER FU,

  FND_USER FUCB,

  FND_USER FULUB,

  FND_USER FULUL,

  FND_APPLICATION_VL FA,

  FND_RESPONSIBILITY_TL FRTL,

  FSG FND_SECURITY_GROUPS

  WHERE

  FURGA. USER_ID = FU. USER_ID

  AND FURGA. CREATED_BY = FUCB. USER_ID

  AND FURGA. LAST_UPDATED_BY = FULUB. USER_ID

  AND FURGA. LAST_UPDATE_LOGIN = FULUL. USER_ID

  AND FURGA. RESPONSIBILITY_APPLICATION_ID = FA. APPLICATION_ID

  AND FURGA. RESPONSIBILITY_ID = FRTL. RESPONSIBILITY_ID

  AND FRTL. LANGUAGE = "FR".

  AND FURGA. SECURITY_GROUP_ID = FSG. SECURITY_GROUP_ID

  ;

  Please mark the Correct/good accordingly.

• Apex report line delete using the jquery class

  Hello

  Using Apex 4.2 and oracle (10 and 11 g)

  On my apex page, I have a report and the button (DELETE)-> id = BtnD , then the user can select and delete the lines of desire.

  Load the page DELETE button is disabled. so when the user has archived the click the box and then REMOVE the button will be enabled to disabled.

  SELECT APEX_ITEM. CHECKBOX (1, empno, 'class = "DelRow" ') 'Select', ename, job

  WCP

  Create a new dynamic action, for example. Remove the line (s)

  Event: click on

  Selection type: jQuery Selector

  jQuery Selector:. DelRow (this is the class that I added to the check box in the sql)

  Condition: Expression of JavaScript

  Value: $(this.triggeringElement) prop ('checked')

  Action: Enable-> jQuery Selector:. BtnD-> location-> jQuery->. BtnD

  Action of false: Disable-> jQuery Selector:. BtnD-> location-> jQuery->. BtnD

  It works fine, however, if there is more than one row and more than one but if selected user

  Nations United checked one of the line then button is also disabled. I want to, it must not be disabled until all lines are UN ticked

  otherwise still activate?

  any help please?

  Kind regards

  RI

  Irha10 wrote:

  Using Apex 4.2 and oracle (10 and 11 g)

  On my apex page, I have a report and the button (DELETE)-> id = BtnD , then the user can select and delete the lines of desire.

  Load the page DELETE button is disabled. so when the user has archived the click the box and then REMOVE the button will be enabled to disabled.

  SELECT APEX_ITEM. CHECKBOX (1, empno, 'class = "DelRow" ') 'Select', ename, job

  WCP

  Create a new dynamic action, for example. Remove the line (s)

  Event: click on

  Selection type: jQuery Selector

  jQuery Selector:. DelRow (this is the class that I added to the check box in the sql)

  Condition: Expression of JavaScript

  Value: $(this.triggeringElement) prop ('checked')

  Real action: activate-> jQuery Selector:. BtnD-> made-> jQuery->. BtnD

  Action of false: disable-> jQuery Selector:. BtnD-> made-> jQuery->. BtnD

  It works fine, however, if there is more than one row and more than one but if selected user

  Nations United checked one of the line then button is also disabled. I want to, it must not be disabled until all lines are UN ticked

  otherwise still activate?

  Change the Condition DA to

  $('.DelRow:checked').length > 0

• Unable to display the results of a detailed report or the results of a questionnaire which is inbedded in the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose '

  Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose 'other LMS standard.  Any ideas on why I see the results?

  Publish your SCORM SCORM Cloud and test if it will show you the results you want.  If so, then your problem is with your LMS.  If this is not your problem may be due to something in the settings of your current project.  Eliminate one thing at a time.

• Report on the use of resources by VMfolder

  Hi guys,.

  I need to get a report that will review records VM to a vCenter and will report back the total amount of RAM used by each folder (implemented and active ideally), CPU (MHz) and perhaps the space used disk

  We organize virtual machines by product/object, our idea is that, by looking at their records, we are able to estimate the total amount of the use of resources by product. I wish I could set this as a weekly task and get the result emailed in HTML form.

  I tried to restore code snippets I've found, but none seem to do the trick.

  Any help would be greatly appreciated.

  Like this

  Get-VM | Group-Object -Property {$_.Folder.Id} | Select @{N="Folder";E={  $folder = $_.Group[0].Folder  $path = $folder.Name  while($folder.Parent){    $folder = $folder.Parent    $path = $folder.Name + "/" + $path  }  $path  }},  @{N="NumCPU";E={$_.Group | Measure-Object -Property NumCpu -Sum | Select -ExpandProperty Sum}},  @{N="MemoryGB";E={$_.Group | Measure-Object -Property MemoryGB -Sum | Select -ExpandProperty Sum}} |Export-Csv C:\report.csv -NoTypeInformation -use
  

• First group title below displays under the column headers using the model 23 classic report with the help of repeat titles on break

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  
  When I look at firebug code I saw that all the tables but the first, the break line is included in the last line of the previous table, so I can see how it did not work for the holidays since.

  I have tow questions.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Example of a question can be seen at apex.oracle.com at home

  Thank you

  Brad

  Roadling wrote:

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  The Standard report template definition in issue 23 contains thead and tbody elements:

  Before the column header

  Column title template

  #COLUMN_HEADER#
  

  After the title column

  After the lines

  
  
  
  
  
  
  #PAGINATION#
  
  
  #EXTERNAL_LINK##CSV_LINK#
  

  This is intentional, the best practice for marking up HTML tables. What is not expected is the problem that arises when this model is used with the break of repeat titles on break formatting option. The repeated headings result table consisting of soup of tags containing several poorly constructed tbody and thead, which is not valid elements.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Create a copy of the report model Standard in Standard (break formatting) for use with reports of the break, remove the thead and tbody definitions of template tags and the breakdown of the reports to use the new model of change. (Or, if you use mainly break reports using the Standard template, keep the tags in the copy and remove them from the original in order to minimize the number of reports, you need to change.)

  Personally, I would create a report model of line custom to break complex reports in order to be able to have complete control over the structure and presentation.

• How to create a report page by using the Web layout editor

  Hi Experts,

  I use wcc11.1.1.7, I need to create the report page by using the Web layout editor, but in this applet (editor), there are only 3 types of link to the page: local page, external page, query, it must be of type of the active report (historical), why I can't see them? y at - it components should I activate this?

  Best regards

  It doesn't have to be in the link on the Page, but in the Page Type.

  See the documentation for http://docs.oracle.com/cd/E28280_01/doc.1111/e26694/e02_weblayout_edit.htm#i1068085 for more details.

• Report to the size of the list of snapshots that are used by a virtual machine

  I'm looking for to add to my report to the size of all the snapshots that are currently used by each virtual machine.  For example, I'm already reporting on space put into service and used space - but how much space are using snapshots?   Is there a way to get this data using powerCLI?

  Thank you!

  Get-Cluster-name NOMCLUSTER | Get - VM | Select

  Name, MemoryMB NumCpu, Description, PowerState, ProvisionedSpaceGB, UsedSpaceGB, Version, VMHost, ResourcePool,

  @{N = "HDsizeKB"; E={($_. Hard drives | Measure-Object-CapacityKB property-sum). Sum}} folder,.

  @{N = "Datastore"; E={($_ | Get - Datastore). Name}},@{N="#snapshots '; E={($_ | Get - Snapshot). County}},

  @{N = 'Name of the OS'; E={$_. Guest.OSFullName}} | Export-Csv "C:\report.csv" - NoTypeInformation

  The cmdlet Get-SNapshot in PowerCLI 4.1 returns an incorrect value. See the size snapshot by Dimitar and Vitali.

  And they display a script, called getsnapshotsize - 1.ps1 that returns the correct value.

  You can use this script to your script as follows:

  (1) download the script and save it in the directory where your other scripts

  (2) call the script of the post in your script and use the size of return value

  Something like that

  Get-Cluster -Name clustername | Get-VM | select Name,MemoryMB,NumCpu,Description,PowerState,ProvisionedSpaceGB,
       UsedSpaceGB,Version,VMHost,ResourcePool,
       @{N="HDsizeKB";E={($_.Harddisks | Measure-Object -Property CapacityKB -Sum).Sum}},Folder,
       @{N="Datastore";E={($_ | Get-Datastore).Name}},@{N="#Snapshots";E={($_ | Get-Snapshot).Count}},
       @{N="OS Name";E={$_.Guest.OSFullName}},
       @{N="Snapshot size MB";E={(.\getsnapshotsize-1.ps1 $_ | Measure-Object -Property SizeMB -Sum).Sum}}     |`
       Export-Csv "C:\report.csv" -NoTypeInformation -UseCulture
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to use PowerCLI to report on the parameters of VMware Tools?

  Anyone know what the script would be to report on the configuration of the VMware Tools on a virtual computer running?  What I'm really interested by creates a report telling me if VMware Tools is configured to synchronize the time with the host.

  Thank you!

  To see what comments to synchronize their time with the host country, you can use this script

  foreach($vm in Get-VM){
       $row = "" | Select Name, ServerTimeSync
       $row.Name = $vm.Name
       $row.ServerTimeSync = $vm.ExtensionData.Config.Tools.SyncTimeWithHost
       $row
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• SQLDeveloper 3.1 Bug: Reports of the child cannot use column "SERIAL #" like bind

  Hello!
  
  It seams to be a bug in 3.1 SQLDeveloper, which did not exist in SQLDeveloper 3.0.
  
  When you create a master report on a query like this:

  Select sid, serial#, inst_ID
  from gv$session order by inst_id

  and a report of the child with a query like this:

  Select * 
    from gv$session s
   where s.sid = :SID
     and s.serial# = :SERIAL#
     and s.inst_ID = :INST_ID

  The report of the child works in SQLDeveloper 3.0 but not 3.1 SQLDeveloper!
  
  When you change the master report like this

  Select sid, serial# as serial, inst_ID
  from gv$session order by inst_id

  and its child relationship like that

  Select * 
    from gv$session s
   where s.sid = :SID
     and s.serial# = :SERIAL
     and s.inst_ID = :INST_ID

  It works again in SQLDeveloper 3.1.
  
  It seems that SQLDeveloper 3.1 has a problem with columns that ends by ' # ', as "SERIAL #" here, used as a bind variable.
  
  Best regards
  Matt
  
  Published by: Matt Schulz on February 15, 2012 16:06

  Hi 895545,

  Logged bug Bug 13779077 -: SERIAL No. is NOT RECOGNISED AS LINK NAME (due to #)

  -Turloch
  Team SQLDeveloper