Report on the VMDK way

Similar Questions

• Report on the vmdk files that make up a virtual machine

  Hello
  Is it possible to create a report/dashboard that would map a virtual machine to its VMDK files in vFog Pro 6.0?
  Example: vmname - data name/ID - vmname.vmdk, vmname1.vmdk store...
  THX

  samardak,
  I think it's possible to pull this information from vFoglight. SOM of our API calls should remove this information of the Victoria Cross.
  That said, it would be wise to either contact your landlord account for assistance in the creation of this report. Your account owner can facilitate the resources needed to help you with a personalized report. If you don't know who is the owner of your account, you can contact support, and we can refer you to the right contact person or group.
  -LM

• Best way to display a report of the hierarchy tree to APEX 4.2

  I have a hierarchical query spans four levels over two tables.  The application works very well and also includes columns hierarchical sum (i.e. the parent displays the sum of all children) using functions.

  I wonder what is the best way to view these data for users?

  At the moment I think I would have a collection now my connection with the edition special 'show' column.  Then I would include HTML to define values correct show/hide and refresh the report when you click on a node.  In my view, this would probably work, but may not be the best way.

  I disassembled my request for necessary columns (no column of the sum) and the tree APEX regions work well for this.  Y at - it a plugin alternative jquery or anything that people with what will give me the directory structure 4.2 native while allowing me to display additional columns with links?

  If I need to provide more info let me know!

  LSDev wrote:

  I'm going to use today to test these ideas, and if they don't work I'll go with the classic report hack, I thought.

  AEC: I'll try the plugin and report back on the question if I can get the links to work.

  The plugin code is clear and simple. However, the links generated HTML text in the query as:

  ...
  '' || apex_escape.html(ename) || '' employee
  ...
  

  does not work out of the box as the plug-in is escaping in HTML output column values:

      -- Render all other columns
      FOR j IN 3 .. l_value_list.count
      LOOP
        sys.htp.p('' || sys.htf.escape_sc(l_value_list(j)(i)) || '');
      END LOOP;
  

  This can be changed to allow the links:

    -- Render all other columns
      FOR j IN 3 .. l_value_list.count
      LOOP
       IF l_value_list(j)(i) not like '' || l_value_list(j)(i) || '');
      END LOOP;
  

• What is the best way to run the report of jasper in the ADF Applications?

  Mr President.

  What is the best way to run the report of jasper in the ADF Applications?

  Concerning

  Tender Hello,

  Check out these links

  Sameh Nassar: Using Jasper report in Application of ADF (detailed)

  https://www.YouTube.com/watch?v=ezX0gdLIhs0

• What is the best way to view an interactive report with 20 columns

  Hello
  
  I have an interactive report, given the number of columns (about 20).
  What is the best way to view this report... by default to scroll horizontally to see all the columns.
  I want to avoid horizontal scrolling.
  
  Thank you
  Deepak

  Hello Deepak,

  You mean apart using a smaller font size or a larger screen?
  You can think to combine / wrapping columns (so more data in a column).
  Or hide some less important data and show only on request.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• What is the best way to connect the two interactive reports?

  Hello
  
  =================
  Set of bottom-up
  =================
  I created two interactive reports - report on the project on the project page and report of tasks in a task.
  Project report on the project page can contain several projects.
  Report of the tasks in a task can contain several tasks.
  A project can have several tasks.
  But a task can have only one project.
  
  
  =================
  What I'm trying to reach
  =================
  When I click on a project name, it must pass The ID of project of work page and view jobs that are established for the project.
  When I create a new task, past project ID must be mapped to the task.
  
  
  =================
  Challenges
  =================
  1. How can I pass Project ID of the project page on the task page while clicking on the project name in the project page ?
  2. How can I get the project name in the page of work based on the project ID goes from the project page ?
  3. How can I view jobs related to the name of the project ?
  4. How can I take project ID passed to the task page and map it to a new task?
  
  Thank you
  Guy

  1. How can I pass project page ID of the project to the task page while clicking on the project name in the project page?

  Create point hidden in a task, for example: P2_PROJECT_ID. That the link on the column to the task page:
  Interactive report-> column change-> link.

  2. How can I get the project name in a task based on the project ID password page of the project?

  There are two ways you can create a function that will return the name of the project by id or you can post the name of the project to the task page (the second way is dangerous, you can miss some parts of your project name if you have a symbol ',')

  3. How can I view the tasks on behalf of the project?

  In the interactive report source add condition to your query, for example:
  and task_table.project_id =: P2_PROJECT_ID

• In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...

  In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...

  Some extensions or toolbars can add such a report.
  
  It can also be part of the code on a page to prevent dataloss if you began to type text (composing a new mail) and you try to close this tab.
  
  You should be able to close this report and close the active tab.

  What I posted above is applicable to all platforms, including Mac.

• Create new report if the file size is too large

  The sequences I run in TestStand have the ability to generate large reports and I am looking for a way to start a new sequence of intermediate report if the file size exceeds certain limits, either start a new report every night at midnight.

  I am currently using TestStand 2014 and reports ATML 5.00.

  Here, any help would be greatly appreciated.

  mattb1 wrote:
  [...]

  I was hoping I'd be able to use some substitutions to get there, but it sounds a bit more complex than that. [...]

  There is no specific substitutions that solve this problem 'in configuration and only few implementation".

  The point is that you should follow the following steps:

  1. check the size of the file after writing a new segment of report data.

  2. If size > configured the file size, create a new file. Write a footer in the previous file, duplicate the header for the new file information and store the handle to file for all the previous files.

  3. once the test is complete, update the header in all files (remember: the header contains the overall result of the ESA.) This is known only when the test is finished!) and finalize all the report files.

  In the plugins default report, none of the above functions is applied.

  You want may also focus on 'File offline results' as a reporting mechanism. It might be easier to change things using this approach, unless you go the recommended manner: database.

  Norbert

• Method of Report.Save, the report has been made in a new path, but why is the empty file?

  Hallo,

  I have a problem to save the report file in a new way.

  In my code, I used the Runstate.Report.Save(newpath, overwrite, 0) method to save the report.

  And after the excution of the test, I can find the file of report in the right place, but if I open it, it's empty, I mean, there's nothing in this report.

  Someone has an idea? Where is the problem? And what I could do?

  Thank you!

  Cabio

  Hi Cabio,

  Before answering your question, I would like to let you know that you can configure the path to the report file in the report file path tab report options.  You can choose from several options, including by specifying an expression that is customized for the report path.  This will allow you to customize where the report is saved without changing code.

  If this isn't meeting your needs, the problem you're likely to have is that you access report until the report is actually produced.  To access the report object after it has been populated, replace the ProcessCleanup callback, which runs after the report has been generated.  (see the example of navigation PreUUTCallback for an example of substitution of a reminder.

  Note: if you use TestStand 2012, this method will not work unless you configure Report Builder for not using a new thread.  You can configure this option in the treatment of dialogue by selecting the checkbox options more results.  If you do not want to use a new thread, you can access the report by changing the sequence of AddUUTReportAndSave in ReportGen_ATML.

• HP 8600 & 8610: Reports of the e-mail

  Is there a way to print a report of the HP 8600 printer and 8610 who will let me know when and to whom I have scanned the pages and sent by e-mail to the printer?

  Thank you.

  Welcome to the HP Forums @Paberle!

  I see that you are looking to print a report that will detail the emails that you send to the printer. The printer does not keep a log of e-mails sent.

  If it meets your needs, please click Accept as Solution button to mark your post as solved. Thank you.

• The right way to face the camera and camera on standby?

  How one brings the camera back to life after the unit returns to standby mode?  What is the right way to manage the device sleep and wake?  Any help is appreciated.

  Hi Sucroid,

  I intend to produce a sample that shows this I hope that during the holiday season.

  Here is some information that can hopefully help you get started...

  When the screen goes to sleep, off camera equipment.  There is nothing you can do about it today, outside of the application one keep awake in your application window. (value SCREEN_PROPERTY_IDLE_MODE SCREEN_IDLE_MODE_KEEP_AWAKE).  Note that this won't save you a user who clicks the power button to force the unit in standby mode.  It will protect you against a situation where your application goes to background or another application requires video resources that are used by the camera.  In these two situations, your application will lose his viewfinder.

  But all is not lost!  There are some events of status, you can listen to that lets you know that the camera stops.  You can listen to these events either with an attached status_callback (applied when starting the viewfinder for example), or by authorizing explicitly state the events using camera_enable_status_event() and waiting for impulses of status.  All these things are detailed in the documentation for the API of photo here: http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.camera.lib_ref/topic/overview.html

  The corresponding lights events are:

  CAMERA_STATUS_RESOURCENOTAVAIL - this event is logged every time that the camera is about to close.  If you have previously called camera_register_resource(), this is the event that listen to you to know that all your camera buffers are about to be démappés - so stop all logic that looks at them and then camera_deregister_resource() camm.  If you do not physically the buffers of viewfinder, then necessarily no need to use this registry/invert mechanism.  It's just there to provide warning and to activate the drivers of the device for you to recognize that it is safe to unamp wait for memory.  Each time the screen goes to sleep, the power button is pressed, or another application has need of resources of the camera, you will get this signal.  If you are curious to know the reason, you can check the 'extra' uint16_t argument in the callback of the situation for one of the camera_powerdownreason_t values.  All video recordings currently active or encodings auto-terminera when this signal is received.

  CAMERA_STATUS_POWERDOWN - event status is reported immediately after the hardware of the device is turned off.  You can't interact more with the camera until this condition is removed.  Note that to capture this event, you will need the user of the status of the event-mode (camera_enable_status_event()) interface, because any reminder of status you can have attached when starting the viewfinder will be cleaned up when the viewfinder stops.

  CAMERA_STATUS_POWERUP - event status is reported immediately after that camera material is fed up after having previously be put off.  Even not not on using status of event-mode interface (camera_enable_status_event()) applies in this case too.

  So, what can you do with this information?

  Well, tuned for CAMERA_STATUS_RESOURCENOTAVAIL will tell you when your viewfinder will close.  At this point, your application must enter a State where he is waiting for an event that will wake it again...

  In most cases, this is the event browser that indicates your application is active or foreground again (NAVIGATOR_WINDOW_ACTIVE or equivalent).

  So when your application is told by browser is it back to the foreground, you can then restart the viewfinder using camera_start_photo_viewfinder() or camera_start_video_viewfinder() according to the requirements of your application.  You will still need to follow the same recipe to start the viewfinder as a cold start your application (for example. Wait for the window of your viewfinder to be filled), but you will not need to reconfigure all the settings.

  OK... which covers 99% of the use cases that you will encounter.  Use case for the 1% remaining, you will need to follow for this CAMERA_STATUS_POWERUP event.  Why?  Well, there is a race condition when things down, in which case if the user wakes up the device while the camera is closing (eg. they struck twice in quick succession, the power button), then the camera will enter its off State, but navigator may actually not report your application it becomes idle.  This is because the infrastructure of power management is waiting actually for the material from the camera to the power off until the system goes to sleep.  If the user wakes up the device upward, then this action is canceled, and the unit enters never actually standby.  In this case of corner, navigator does not say your app to become active, again because he never told your application becomes idle.  So what are you doing?  Well, I have 2 suggestions:

  1. You can follow to CAMERA_STATUS_POWERUP using the event interface mode for the camera equipment.  It's actually the more correct approach and what we are doing internally with the BB10 camera App.
  2. You can use a timer to try to wake up the camera in the case of this corner case occurred.  for example. wait 5 seconds after the signal CAMERA_STATUS_RESOURCENOTAVAIL.  If your application has not been made inactive by browser, then you can try turning it back on the camera.

  I hope this help get you pointed in the right direction and still... I plan on collecting a best-practice appropriate sample that illustrates exactly how to do this when the weather!

  See you soon,.

  Sean

• What is the best way to remove a virus on a Windows 7 computer?

  Hello, so I have a little problem here my pc has contracted a major virus that my my anti virus cannot process. The only way I know to do is to reset my pc to factory settings, my pc came with windows 7 home pre-installed when I bought it. Is there a way I can use the product key on the back of my laptop to reinstall windows 7 when I restore my computer. I would rather not to buy at the store

  Hello

  If you can not remove the malware then follow the good advice of André for resettlement.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• How to read the report of the unit for HP Deskjet 1510

  Hi HP.

  I see the software provided with this printer, it has this option to print the reports of the unit.

  Please help on how to read this report because it consist of unknown coding and other things.

  I would be grateful if your side can help me on this coz I guess we can follow our consumption through this report.

  If this isn't the goal, maybe you can suggest another way to get understandable use of reports?

  Kind regards

  Nadiya

  Hello Nadiya,

  Welcome to the forums

  I understand that you are looking for a usage report. The printer prints a test page and you can see the number of pages on this page, as well as information about the printer, such as serial number, etc.. If there is anything else that can say 'use' it please let me know and I'll do my best to help.

  Click on this link: streaks of ink, fixing faded prints and other common print quality problems

  In the guide, look under "Solution 6: print and evaluate a page of test and troubleshooting of faults" and print a test page.

  Take care

• PLS-00103: encountered the symbol "SYS_REFCURSOR" during the expected in the following way:

  Hey Geeks,

  I am trying to execute the procedure from the SQL Developer, but these errors are coming. What can I do wrong here...

  Procedure works fine when I run the compilation and debugging mode. But I need to put later in the c# code.

  SET serveroutput on;

  DECLARE

  OutParam1 to SYS_REFCURSOR;

  OutParam2 ON Varchar;

  BEGIN

  / * Call procedure package * /.

  SPAT_QUERY. SP_VALIDATERULES (9, 'BIS2015001', OutParam1, OutParam2);

  / * Display parameters * /.

  dbms_output.put_line ('OutParam1: ' |) OutParam2);

  END;

  -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Error report-

  ORA-06550: line 3, column 20:

  PLS-00103: encountered the symbol "SYS_REFCURSOR" during the expected in the following way:

  := . (@ %; not null default range character)

  06550 00000 - "line %s, column % s:\n%s".

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  -Procedure below:

  create or replace PACKAGE SPAT_QUERY of BODY

  AS

  / * Declare a global variable to hold the result of the Validation. */

  valResult varchar (10);

  PROCEDURE SP_VALIDATERULES)

  IN_RQST_NUM NUMBER,

  IN_CASEID IN VARCHAR,

  OUT_REFCURSOR ON SYS_REFCURSOR,

  OUT_VAL_RSLT ON VARCHAR

  )

  AS

  p_rc sys_refcursor;

  I have NUMBER: = 0;

  / * Logical query - a loop in the Table of RULES based on request NUM * /.

  BEGIN

  FOR rec IN (SELECT * FROM T_RULES where RQST_NUM = IN_RQST_NUM)

  LOOP

  i: = i + 1;

  SP_GETSECTS (IN_CASEID, rec. LYR_TX, rec. TRGT_TX, rec. EXCPTD_RSLT_CD, p_rc);

  OUT_VAL_RSLT: = valResult;

  END LOOP;

  END SP_VALIDATERULES;

  Thank you

  Ken

  in anonymous block, variables cannot be defined in the form. IN and OUR are not variable parameters type

  Change your code to

  DECLARE

  OutParam1 SYS_REFCURSOR;

  OutParam2 Varchar;

• "The activation server reported that the product key has exceeded its limit of unlocking". Error

  Hello

  I recently changed my motherboard and processor because my old card mother and fried CPU. I had Windows 8 Pro (64-bit) installed earlier, an upgrade to Windows 7 (64-bit). As soon as I started first of all, I got a notification asking me to re - activate my Windows but when I try to activate it with my original key, I get this error: "the activation server reported that the product key has exceeded its limit of unlocking".

  I tried to activate by phone, but instead connect to the automated system, I keep to redirect to voicemail after a few rings. Can someone help me to activate my Windows again? I'm in Karachi, Pakistan.

  The report shows that it is been activated previously, but that the material has changed considerably since the activation - hence the request for reactivation.

  Not too surprising if you traded motherboards. :))

  Telephone activation is definitely the way to go - but it's in the lap of the gods (i.. activation e. operator the MS) as to if they will allow it if the original Win7 installation was an OEM.

  My belief is that they will allow him - of some people hold that they will not :)