report that shows the same values twice in 11g

Similar Questions

• Only GET records that have the same values of field has the same value in field B

  Have a hard time with below, please help.

  Here's the situation:

  create table cord (identification NUMBER, CM VARCHAR2 (3), PM VARCHAR2 (2));
  insert into string values (1, '002', 'H1');
  insert into string values (2, '006', 'H1');
  insert into string values (3, '004', 'H2');
  insert into string values (4, '006', 'H2');
  insert into string values (5, '004', 'H3');
  insert into string values (6, '004', 'H3');

  I just need to select the folders which, for the SAME value of PM have the same value in CM, in example above, those are recordings with ID (5,6).

  1 and 2 fail because for them CM and PM are different for the same H1, similar on the 3 and 4.

  I don't know if this will help but records are always in 'pairs', which means that there are no cases as

  7. '004' | H4

  8. ' 006' | H4

  9. '005' | H4

  Any ideas are much appreciated.

  Thank you

  See if the following can help...

  select id,cm,pm
      from(
          select t.*
                ,count(1) over(partition by cm,pm) cnt
              from testt t
          )
      where cnt>1;
  

• Need to show the same values in all jspx pages

  Hello.
  
  I use jdeveloper 11.1.1.5
  
  I had created a jspx pages such as dept.jspx and emp.jspx
  
  I've been using this in my jspx page

   <af:outputText value="#{bindings.return.inputValue}"
                             binding="#{pageFlowScope.backing_dept.ot1}"
                             id="ot1"/>

  The bindings.return.inputValue will return the value of the code below
  

      public String checkLoginCredentials1(String p_user,String p_pwd)
      {
      System.out.println(p_user + " " + p_pwd);
       ApplUsersVOImpl  vo = (ApplUsersVOImpl)this.getApplUsers1();
       /*set the bind variable value*/
      vo.setNamedWhereClauseParam("p_user",p_user.toUpperCase());
      vo.setNamedWhereClauseParam("p_pwd",p_pwd.toUpperCase());
      vo.executeQuery();
      int rowCount=vo.getEstimatedRangePageCount();
      System.out.println("rowCount="+rowCount);
      if(rowCount==0) 
      { 
         throw new JboException("Password doesn't match");
       }
         return "Welcome"+ "  " + p_user.toUpperCase();
      } 

  My scenario is that I need to display the same value in emp.jspx
  
  I had created a task flow frm dept.jspx to emp.jspx and emp.jspx to dept.jspx
  
  I tried the same XML file in my emp.jspx

  <af:outputText value="#{bindings.return.inputValue}"
                             binding="#{pageFlowScope.backing_emp.ot1}"
                             id="ot1"/>

  But while I m browsing frm emp.jspx to dept.jspx there are doesnot.,.

  This means that for the faces-config. XML (the standard JSF configuration file), there is no scope spanning application except for the scope of the session. This does not mean that you should not use extended session if you use faces - config.Xml.

  However, you have been advised to use the workflow and no faces - config.Xml.

• query to view separate lines that have the same values

  Hello

  I have the columns id, addr1, addr2, city and State of coding. I need to know all the coding IDS that have the same addresses and at the same time filter out the same side of the id of the request.

  For example:

  acctid addr1, addr2 City State

  WEF 1 101 101 sd

  1                         101          wef     sd

  WEF 2 101 101 sd

  WEF 3 101 101 sd

  DC 4 102 102 homeless

  From the above data, I want to get filter tier 4 and get lines 1, 2 and 3. How to achieve with a sql query

  Thank you

  Arch

  This has nothing to do with hard... coding is how you test a query without creating the table, so you'd:

  with match_finder AS (SELECT acctid, addr1, addr2, city, State, count (*) OVER (PARTITION BY addr1, addr2, city, province) AS identical_rows)

  OF )

  Select acctid, addr1, addr2, city, province

  of match_finder

  where identical_rows > 1

  /

  and the rest, I'm sure, you can find on your own...

  HTH

• Read the nodes that have the same value as the subnodes - XML

  It is more of a general JAVA / XML problem, but given that it is going into my BlackBerry app I thought I'd see if anyone knows.

  Consider a simple XML document:

                      Whatever 1                   Whatever 2               Whatever 3       
  

  Using the standard org.w3c.dom, I can get the nodes in X by the practice...

  NodeList fullnodelist = doc.getElementsByTagName ("x");

  But if I want to go to the next set of 'e', I try to use something like...

  Element element = (Element) fullnodelist.item(0);NodeList nodes = pelement.getElementsByTagName("e");
  

  EXPECTED back '3' nodes (because there are 3 series of 'e'), but it returns '9' - because it gets all entries including the 'e' apperently.

  It would be nice in the above case, because I could probably go through and find what I'm looking for. The problem I have is that when the XML file looks like the following:

              whatever              Something Else                    whatever              Something Else            
  

  When I ask 'e' value, it returns 4, instead of (what I want) 2.

  I am simply not understand how DOM parsing works? Generally, in the past I used my own XML documents so I name never articles like this, but unfortunately this isn't my XML file and I don't have the choice to work like this.

  What I thought I would do, it is write a loop knots "drills down" so that I can combine each node...

    public static NodeList getNodeList(Element pelement, String find)
      {
          String[] nodesfind = Utilities.Split(find, "/");
          NodeList nodeList = null;
  
          for (int i = 0 ; i <= nodesfind.length - 1; i++ )
          {
              nodeList = pelement.getElementsByTagName( nodesfind[i] );
              pelement = (Element)nodeList.item(i);
          }
  
          // value of the nod we are looking for
          return nodeList;
      }
  

  .. While if adopted you ' s/e' in the service, he would return the 2 nodes I'm looking (or elements, perhaps I'm using the wrong terminology?). on the contrary, it returns all the 'e' nodes in this node.

  Anyway, if anyone is still with me and has a suggestion, it would be appreciated.

  Well, there is no doubt that there is a learning curve robust for XML programming. You can take an hour or two and go through one of the tutorials that are circulating on the net. (Like that of w3schools.com.)

  Basically, almost everything in XML is a node, the Document that returns the parser. The API for node tells you that you can test the node type you have by calling getNodeType, which returns one of the constants of type node (Node.ELEMENT_NODE, Node.TEXT_NODE, etc..) If necessary, you can then convert the variable to the corresponding interface (element, text, etc.).

  Similarly, the API documentation say you for any node, calling getChildNodes (or for an element node or Document getElementsByTagName) will give you a NodeList (a little non-types of nodes in the XML API), while calling getFirstChild and getNextSibling to any node will give you another node (or null ).

  Once you learn the API, writing logic of course is not all that hard. For example, if the only 'e' interest tags are those directly under the element root of the document (as shown in your example) you can simply go to them directly:

  Vector getTopENodes(Document doc) {  Vector vec = new Vector();  NodeList nodes = doc.getDocumentElement().getChildNodes();  int n = nodes.getLength();  for (int i = 0; i < n; ++i) {    Node node = nodes.item(i);    if (node.getNodeType() == Node.ELEMENT_NODE &&        "e".equals(node.getNodeName()))    {      vec.addElement(node);    }  }  return vec;}
  

  Note that this example does not assume that all children are nodes of element 'e '. the document could have comments, white space or something else that makes it into the DOM as comment, text or any other type of node.

  On the other hand, if you want to capture every "e" tag which is directly under the ' tag, no matter the level, then you need to do something a little more complicated (it's on the top of my head - no guarantee):

  static class NodeListImp implements NodeList {  private Vector nodes = new Vector();  public int getLength() {    return nodes.size();  }  public Node item(int index) {    return (Node) nodes.elementAt(index);  }  public add(Node node) {    nodes.addElement(node);  }}
  
  NodeList getTargetNodes(Document doc) {  NodeListImp list = new NodeListImp();  getTargetnodes(list, doc.getDocumentElement(), false);  return list;}
  
  void getTargetNodes(NodeListImp list, Node node, boolean parentIsS) {  if (node.getNodeType() == Node.ELEMENT_NODE) {    // node name is tag name for element nodes    String name = node.getNodeName();    if (parentIsS && "e".equals(name)) {      list.add(node);    }    parentIsS = "s".equals(name);    for (Node child = node.getFirstChild();         child != null;         child = child.getNextSibling())    {      getTargetNodes(list, child, parentIsS);    }  }}
  

  I hope that it gets the idea across.

• inputText and ouputText does not display the same value

  Hello

  JDev 11.1.2.4

  On my page, I have an inputText and outputText bound to the same link of the attribute. The bind value is defined in a value change listener, and then the two components are updated. Say I put in 2009 for the PeriodFrom, the inputText remains empty, but the outputText shows the 2009. How is possible that the two items related to the same link does not show the same value.

  < af:inputText value = "#{bindings." PeriodFrom.inputValue}"required =" #{bindings. " PeriodFrom.hints.mandatory}.

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  < f: validator binding = "#{bindings." PeriodFrom.validator} "/ >"

  < / af:inputText >

  < af:outputText value = "#{bindings." PeriodFrom.inputValue}"id ="ot3"clientComponent ="true"/ >

  Furthermore, I tried to get the RichInputText component and call a getValue on it, and the value returned is 2009. I'm completely lost.

  Thank you

  I made the fragment of page from scratch. I discovered why the update does not work. This is because the selectOneChoice is inside an af:subform. If I remove the subform, the update works correctly.

  shortDesc = "#{bindings." StdcntyCode.hints.tooltip}"id ="soc2"simple ="true"autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.identificationSessionEditBean.countryValueChangeListener}" > "

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  columns = "#{bindings." PeriodTo.hints.displayWidth}"shortDesc =" #{bindings. " PeriodTo.hints.tooltip}"id ="id2 ".

  autoSubmit = "true" simple = "true" >

• How to create an accordion for a report that shows one of

  Hi all
  
  How can we create an accordion in a report that shows the details of the line in a form below, and then when we push the button of Update of the form, it must update the columns close the accordion and update this one line in the report.
  
  I have seen two examples
  
  http://HTMLDB.Oracle.com/pls/OTN/f?p=11933:131:1811032969809934:no:RP:
  
  http://HTMLDB.Oracle.com/pls/OTN/f?p=11933:77:1811032969809934:no:RP:
  
  Secondly a loading actually a new page but I do not know how to update the form, and then close the accordion region and then refresh the single line. Here pointers will be of great help.
  
  Thank you and best regards,
  Vikas

  Vikas,

  I slightly modified on of my examples alumni and you will find everything here:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:241

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• ? Adobe digital editions4.5:check:activation error; Book downloaded from kobo creates a link url of ASMC. try to open it in dig.edit. results in the activation error; List IDS allowed adobe to dig. Edit shows the same email that you used for download Kobo

  ? Adobe digital editions4.5:check:activation error; Book downloaded from kobo creates a link url of ASMC. try to open it in dig.edit. results in the activation error; List IDS allowed adobe to dig. Edit shows the same email that you used for download Kobo.

  The operating system that you used?

• How to restore the information bar that shows the prevention of opening a pop-up window?

  After Firefox open the InfoBar telling me they have blocked a pop-up window I inadvertently clicked on the link option and delete the new coming information bar.
  How to restore the information bar that shows the prevention of opening a pop-up window?

  This has happened

  Just once or twice

  == I clicked on the link to the option and select the option "do not show this again."

  I put browser.popups.showPopupBlocker false, and always appears in the information bar.

  When I also set privacy.popups.showBrowserMessage to false, it does not appear.

  I use to check, if the info bar is displayed,
  http://www.PopupTest.com/popuptest3.html

  So, the value of the real preferences

  privacy.popups.showBrowserMessage

  and

  browser.popups.showPopupBlocker

  Two of them!

  This help you?

• If the C:\winnt folder should be present on all computers that run the same WinXP Pro, SP3?

  I tried to install a wireless adapter USB on my laptop, but I can't seem to get the driver from the installation CD files to load.  I have no problem loading and use of the adapter on my desktop. They are in C:\winnt\system32.  On my laptop (Dell Inspiron 700 m, running the same WinXP Pro, SP3), no there no. C:\winnt folder. This would explain why the CD with the driver files will not charge in the computer and so why the adapter won't work. Why would this file be C:\winnt... not being on my laptop using the same operating system? It would be possible that Dell to have intentionally omitted when they loaded 'their version' of XP?

  Some XP system files in C:\WinNT store computers, and some store in C:\Windows .  I don't think that the difference due to the problem with your wireless network card.

  The driver installation should ask Windows XP where to install the files, using the value of the environment variable SystemRoot .  Its value, click Start > all programs > Accessories > command prompt , type the following command and press enter :

  echo % SystemRoot %

  That shows the Manager of devices for the network adapters?  The wireless card is installed, and it has a driver installed?  There are some unknown devices?

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Issue of multiple Disqualification tasks that use the same snapshot

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  A snapshot has been created in which the WHERE clause is outsourced and this snapshot table is used in a data quality process.

  Since there are different values passed to the WHERE clause, different jobs who have their own data quality process, but these process reads from the same snapshot table.

  Disqualification does not allow execution of different tasks that uses the same shot to run at the same time.

  Job1 is in operation, job2 throws an exception that the snapshot is locked.

  Any reason why Disqualification has this restriction? Processes are just doing a read on the snapshot table operation, so I was wondering why it was necessary to lock the object.

  We have more than 60 jobs that use the same snapshot and it would inhibit scalability if we are forced to run 60 jobs in sequence and not allow them to run in parallel.

  Can you advice how to fix this problem?

  The short answer is that each task must be executed with his own label of execution. Otherwise, each work is actually being run in the same context, and you will have problems of blocking.

  Please read on the labels of the execution and run profiles in the online help.

  Note that when running with a label of execution, complete results are not written; you need to decide exactly what to write work featuring the views of results you need. All data staged (including the snapshot itself) will be written with a label execution context and you can view the results in the Console of the server. Director will only show the results of the last run.

• Compare the report not showing the changes

  I modified an app engine select commenting on a line. I then did a report compares against a database that do not have the code

  

  The comparison report shows no difference between the two DB

  What Miss me?

  

  If you change only the SQL, then you need compare SQL objects. The report you are looking at is only for the engine program of Application objects. This will only show the changes made to the program properties (things like the records of State or temporary tables, attached to the program).

  Another report will show the changes for Application Sections of the engine, which would include things like the addition of new sections, adding or removing a step of a section or changing the properties of a step or a section.

  Also, to see changes made to the Application Engine PeopleCode, you'd have to glance at the Application Engine PeopleCode compare report (note that peoplecode types are detailed in separate reports, but all the SQL types appear in the same report).

  Kind regards

  Bob

• Find the same value in different columns

  Hello

  I'm trying to figure out how I would get the same value in the same row but in different columns. For example, in the table sometimes report the name is the same as the description. I would like to find all the lines where this is the case.

  Thank you

  Name of the report	Description	Date	Time
  Report 1	Report 1	Delalande	TTTT
  Report 2	Billing report	Delalande	TTTT
  Report 3	Report 3	Delalande	TTTT

  Hello

  Is that what you want?

  SELECT *- or whatever the columns that you want to

  FROM table_x

  WHERE description = report_name

  ;

  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• the detailed report based on the selected value

  Hello experts,
  
  I use 10g obiee.
  
  I have a requirement were on the dashboard there are 4 guests say product, region, year, color.
  
  All are select muli-value prompt.
  
  on the dashboard, there is a synthesis report that reflects the value according to the selected data from the command prompt. His work so far.
  
  Now below the customer wants a link that has the title of 'detailed report '. When they click the hyperlink, they want to see detailed but it show only the values selected in the command prompt.
  They claim as detail as there are more number of columns found in the report detail than the summary report following.
  
  Can we can suggest me how to achieve in 10g.
  
  Thanks a lot for your help.

  Hello

  Just add your detailed report to the dashboard as a link or an Image and keep the required columns, you are invited into the report. It should work.

  Thank you
  Gerard

• GL CCID have the same values for Segment

  Is it possible that two different code_combination_id in the same GL_Code_Combination table has the same values for segment.
  It is, when I run the accounts payable balance report trial of the responsibility of the PA, its follow-up of the transactions ID associated with only 1 and not both.
  But, here, for the same Chart_of_Accounts_Id, we can see that there are two Code_combination_id entries, with the same values for segment.
  Can you please let me know if this is possible?
  
  For example: I'm running the following queries and Segment1, Segment2, Segment3, Segment4, 12855 CCId values Segment5 is the same as Segment1, Segment2, Segment5, Segment4, Segment3 to 13402.
  
  Select CODE_COMBINATION_ID, CHART_OF_ACCOUNTS_ID,
  SEGMENT1, SEGMENT2 SEGMENT3, SEGMENT4, ENABLED_FLAG, SEGMENT5,
  * of the GL_CODE_COMBINATIONS where CODE_COMBINATION_ID = 12855
  
  Select CODE_COMBINATION_ID, CHART_OF_ACCOUNTS_ID,
  SEGMENT1, SEGMENT2 SEGMENT3, SEGMENT4, ENABLED_FLAG, SEGMENT5,
  * of the GL_CODE_COMBINATIONS where CODE_COMBINATION_ID = 13402
  
  CCID - Segment1, Segment2, Segment3, Segment4, Segment5
  -----------------------------------------------------------------------------------------------
  12855 01 000 2220 00000 000
  13402 01 000 2220 00000 000
  
  I hope you understand.
  Thank you
  Bob

  Hi Bob,

  Can you please check the id of chart of accounts for the two combinations...

  Concerning
  Muthu

  Published by: Muthu on April 30, 2013 02:10