Reports and maximum size of columns in formula tank and placeholder

Similar Questions

• Pole #1 PC Performance and RAM: quantity, average, maximum size of files Adobe

  Do a little research here regarding the performance of the PC and the main memory/RAM.

  If you all could estimate/Riddle the minimum and maximum amount of files Adobe program, as well as file sizes, by each program (Illustrator, Photoshop etc...) I drop the results into a spreadsheet and provided details to etc. (at least attempt, based on number/quantity of participants, if the top I'll provide statistics at the end).

  Also indicate what is the size of the file you usually launched and how many of them. These averages are expected to produce some very interesting/useful information.

  More people who best meet of course (unless this has been done or his stats there somewhere already).

  Since I work mostly in Illustrator, these are the files that I took to target when looking for my storage by specifying the .ai extension. (both bad operating system couldn't do the math).

  I specifically made the research by entering the generic asterisk before the file extension, for example: * .ai, then by specifying all storage locations (Windows, choose 'My Computer' etc., Mac do not know, I have one, just don't use it often so that if anyone would care to specify it).

  For windows, the status bar at the bottom of the window has provided total number of files. To get out of the category, I've just enlarged screen and first counted the number of files poster by scrolling the window. Then moved/positioned column size of file, you click this header to sort etc. from the bottom up, then began to scroll the window with a simple click of mouse (not by the arrows) and counted the pages for the file/category varies so thought to them.

  My results (rounded):

  Illustrator

  Total files: 900 +.

  Min. size: 3KB

  Maximum size: 300, 00KB (or 300 MB)

  Based on the results of research and my some quantities of products and file sizes, I created 5 file size categories:

  1-0-1, 000 KB(1MB)

  2 1, KB(1MB) - 2, KB(2MB) 000 000

  3 2, KB(2MB) - 10, 000 KB(10MB) 000

  4 10, 000 KB(10MB) - 50, 000 KB(50MB)

  5 200, 000 KB +.

  360 files in category 1

  300 cases in Cat. 2

  220 files Cat. 3

  30 files in Cat. 4

  5 files in Cat. 5

  * There are duplicates

  Average of Adobe programs and files of launched/open all day (or work them)

  Illustrator: 2-5 or 10 files a few cat. 3, 1 in category 5 to 300 000 KB

  Absolute maximum load

  Illustrator, launched with 2,300, 00 KB (300 MB) of files, maybe 5 Cat. 3 and 5 Cat. 4, 850 000 Ko charge total (850 MB)

  If someone elsehas another suggestion of structure for the post categories please, seemed to me these adapted my amount of files.

  The information in it would be very helpful/insightful with regard to material resources and system performance is affected. It will also be interesting to see how the Illustrator compares to Photshop (and other programs).

  I'll also post this in the forum of Photoshop.

  [I wonder why copy what hinders a message from one forum to another formatting, adding of additional places at random]

  THX

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  150 views, by a global forum, and they can be repeated without participation except one > interesting

  Perhaps 150 users were curious what kind of question can have been displayed on a stick (pole).

  Find "survey."

  JET

• Set the size of the field in the report and the interactive report

  Hello.
  
  I have 2 questions.
  
  1. How do I report and interactive report to broadcast 100% of the width of the screen, even with just 1 column?
  2. how to set the custom field size. For example, first field should be 100px 200px second and so forth
  
  Thank you.

  This is to answer your second question.
  Define the columns with a width of custom field?
  Go to declare attributes--> click Change next to the domain name-->
  Find the region column--> CSS formatting style:
  Enter the values you want to account for your specifications.

  Ex: CSS Style: Width: 100px
  or Style CSS: Width: 200px

• How to add a column of formulas in a report

  Hello
  I made a report based on a query.
  There are 3 columns in the query and all 3 are displayed.
  Now, I want to add a new column (column fomula) to the report.
  I want to write a query within the formula column. To run the query col1, col2 and col3 values are required in the formula column.
  Could you please tell me how to add a column of formulas in the report and how to pass the value of column of data in the formula column
  concerning

  Please see '3.9.1.2 an image or repeating framework' in the following document.

  http://download.Oracle.com/docs/HTML/B13895_01/orbr_howto.htm#i1059697

  In the property inspector of the extensible framework, there is a 'Source' property, use Group second query name here. Vertical elasticity of the framework would be variable.

• When I put the virtual memory in windows vista is it ok! to enter the same size (MB) the initial size and maximum size boxes example 2877 (MB's) entered the two box?

  When I put the virtual memory in windows vista Home premium is ok! to enter the boxes the same size (MB) "initial size and the Maximum size" example 2877 (MB's) entered in each box for initial and maximum size?

  Yes, you can do it. The minimum must be large enough to contain an image of the core. If the maximum is too small, you will get the unpleasant results.

  This article has some tips on the size of the page file at the end.

  http://blogs.technet.com/b/markrussinovich/archive/2008/11/17/3155406.aspx

• I'm on the 4.1.1.00.23 Apex vesion. I've created a classic report and I am trying to sort. Here's how I'm trying to sort by column name. I have TotPGPV with sorting sequence 1 desc and NewTOTPGPV with sorting sequence 2 desc. I have Count1, Count5 with t

  I'm on version 4.1.1.00.23 of the APEX. I've created a classic report and I am trying to sort. Here's how I'm trying to sort by column name. I have TotPGPV with sorting sequence 1 desc and NewTOTPGPV with sorting sequence 2 desc. I have Count1, Count5 with the sort column. What I'm asking is when the report is run can column sorting to default Count1 and Count5 descending instead of the ascendant. I don't see anywhere to set the default value for the sort column.

  Hi - on the report of the page attributes - that you show in your attached screenshot - you can select the columns to sort on the sort sequence as well as the direction of the sort, i.e. for a given column, you can choose to allow sorting on this column, what position this column must be in the sort sequence and whether to sort Ascending or descending by default (i.e. '1' means sort this column first and bottom-up and "1 desc") sort this column first and downhill). Don't forget that once you click on one of the headings of column during execution, it changes your sort settings and these settings are stored in your preferences, that is, they are used again the next time you log in your application and rerun the report.

  Kind regards
  Marc

• The maximum size of the LUN and VMDK disks

  Hello

  What is the maximum size of a LUN I can introduce to Virtual Center.  What is the disk vmdk maximum size that I can use in a Virtual Machine?

  I use vSphere 4.1 and Virtual Center 4.1.

  Thank you.

  Kevan

  the answer to both is 2 TB minus 512bytes

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_config_max.PDF

• Drive modes and instant maximum size

  Hi all

  Just a quick question. I use vSphere ESXi 4.1 (latest updates/patches) and EMC CX4-120 FC SAN. Can you freely switch between disc modes, for example non-independent for independent/persistent and then return non-independent with affect the data residing on the modified disks. I was wondering I have a very large drive I want to exclude a snapshot, but it maybe a chance later I want I can change this disk return to dependent mode so I can include the disk in the future snapshots. Also is there a VMware rule for size max a drive can be entered shoud not be taken because it is too big?

  Thank you

  Craig

  The maximum size of drive to create a snapshot depends on the size of the block of the data store. http://KB.VMware.com/kb/1012384

  You can change it back between independent and normal such as when you use storage vMotion.

  Post edited by: a.p. - corrected fault in URL KB

• Failure of hard drive in Dimension 8250, the maximum size and the type of replacement tips please

  Dimension 8250 (Feb 2003), Windows XP Home SP2, 60 GB HDD, 512 MB of RAM, BIOS A01 - entirely standard

  My hardrive suffers from weird deaf noise for a few months, but last week, it was a lot worse. Sometimes it starts up and is ok, othertimes it takes 1 hour to start and everything produces the deaf noise and is so slow, that it's unusable and other times simply clunks and not even start.

  Error messages received:

  (a) "drive Dell, monitoring system has detected that drive 0 on the primary Eide controller is out of normal, backup specifications and replace the HARD drive.

  (b) "error was detetcted on the HARD disk during the paging operation" (in the event viewer)

  (c) "driver detetcted a controller the HARD disk error" (in the event viewer)

  (d) when I run the Dell IDE Drive Diagnostics (F12), it says FAILED return Code 6

  Issues related to the:

  (1) am I correct that the drive needs replacement?

  (2) I want to just keep it very simple and buy a drive and adapt it, do not worry about BIOS or other upgrades. What I do pay attention to the size car that I buy, is there a maximum size that I can have with BIOS A01? Maybe thought to 120 GB? I just want to be able to adapt, without having to play around with BIOS upgrades so simply the easiest option, which is to buy, set up and reinstall the software. So, is there any limitation integrated with BIOS A01? The recovery CD is XP SP 1

  (3) am I correct that the PC supports up to 100 ATA if you need to make sure that I buy ATA 100 no ATA 133?

  (4) original drive is Hitachi, Seagate Barracuda would be better?

  (5) think active drive a 2 MB cache, a cache 8 MB drive would work ok without me having to pay anything and if yes is it useful on the 2 MB cache?

  Thanks for your time.

  Message edited by craiguk on 02/06/2008 18:27
  Message edited by craiguk on 02/06/2008 18:28
  Message edited by craiguk on 02/06/2008 18:47
  
  

• Customization of file exchange: what is the initial and maximum size recommended?

  Hi everyone and hurt.

  
  After response of harm to my question on how to install diskettes, evil said:

  
  "allocation of disk: is a three step process, first of all, you set the boot order in the BIOS, then you format the windows disks and assign drive letters, then again Windows you set up for the swap file." Then the allocation of media preview cache, project etc. is made in preferences, and setting up a PR project."

  
  and I have a question about the pagefile.

  
  First of all, let me tell you describe my new machine, there a configuration to 4 disks, no RAID, 16 GB RAM, with OCZ Vertex3 for programs and the OS, which I installed Windows 7 Ultimate 64 bit on this disc, Web Premium CS5, and Acrobat 9 Pro. In the BIOS, I did drive OCZ (OS), be the priority in the boot order.

  Later, after checking the system is functioning, I'll upgrade to Classic Collection CS5.5, so at this point, I named my 3 expansion packs to this title.

  
  WDC WD 2002FAEX-007BA0 - "Media Projects (D).
  WDC WD 1002FAEX-00Y9A0 - "Swap file, media Cache (E)"
  WDC WD 1002FAEX-00Y9A0 - 'previews, Exports (F).

  Then, because now they are simply names I gave on different drives, and I'm trying to change the paging file, switching happens in the disc of the operating system, in order to arrive in the disk that will be designated for media Cache (by the Prime Minister, subsequently).

  Thus, in the performance of Windows Options pane, I went to the Advanced tab, and under virtual memory, I hit 'change', uncheck automatically manage file size exchange for all readers, select drive E, which is the drive that is having the pagefile to happen there.

  And the question, assuming that I'm supposed to select custom, size can harm you, or / and others, please recommend the initial and maximum size?

  Alternatively, I have to select "system managed size"?

  Thanks :)

  Minimum,.

  Where you put the pagefile just does that much of difference, when you have 16 GB (as you do) and 24 GB still less so (as the user in the other thread).

  If I had your material, I put on E: and make static at 16 GB min and max 16GB (bad suggests same size).

  I don't spend more time reading or to dwell on "static pagefile" However unless you want to purely for fun.

  When you have enough RAM that your applications require no more you have, Windows must either ask for a large part of this file. Ten years when the RAM chips were much smaller and the cost per GB was more expensive that now, details of page file were indeed more important than they are today.

  Jim

• Maximum number of columns in the generic report

  What is the maximum number of columns in the generic report? I put it to 100, but the data that was displayed are always 60.
  
  Thank you.

  Hello

  It is 100.

  Oops, I thought it was, it seems, this maximum has been removed now - see here
  Maximum number of columns in the generic report

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

  Published by: Munky on August 28, 2009 11:16

  Published by: Munky on August 28, 2009 11:17

• Deny access to my SkyDrive workbook error: "workbook is greater than the maximum size of workbook can be opened in the browser.

  Original title: deny access to my workbook to SkyDrive

  I have a workbook stored in SkyDrive that I share with several co-workers. We had no problem sharing the workbook for the last two weeks, but this morning, we are all getting an error message saying "Workbook is larger than the maximum size of workbook can be opened in the browser" and cannot access it at all. It's a very important workbook we need on a daily basis at work, then I would greatly appreciate any advice you could provide!

  Thank you
  Samantha

  Hello

  Because the problem is related to SkyDrive, I suggest you to report this problem in windows live support team.
  http://windowslivehelp.com/product.aspx?ProductID=6

• Maximum number of columns in model RTF Pivot

  HI -.

  For the model previously mentioned here matrix report problem with template RTF - text columns

  I want to restrict the maximum number of columns per page, and the table should be repeated for the rest of the columns in another page.

  For example, if there are 5 columns must be returned, I want the first 3 columns in the first page and the 2 others in a second page (with the hole repeating frame).

  It's for keeping data legible printing of the pdf format, otherwise the data seems damaged and unreadable.

  Y at - it ideas to achieve this requirement?

  Best regards

  Rupture of the horizontal column works fine in the attached version of the RTF model.

• Maximum size LOG_BUFFER

  Hi guys,.

  I have a question about the LOG_BUFFER initialization parameter. What is the maximum size allowed for this value? I got some online forums that high values does not benefit a lot, but there is no harm in spending. What I have is a very huge table updated - that I am segmentation using parallelism DIY (from Tom Kyte) and execution of 5-6 pieces at a time. During the execution, most expect the reported event is on "log buffer space" event. If I understand correctly, it is either because of the disks slow log or a bad tuning log_buffer. Before entering disk speeds, I would get clarity on LOG_BUFFER.

  Now, I tried to increase the value, but no matter what value I give in the init.ora file, does not 'see the log_buffer parameter' above 268427264 (I think it's almost 256 MB). I tried to give 2GB in the init.ora file, but it does not exceed 256 MB. How did this upper limit calculated by Oracle? And how can I increase it?

  Could you please help?

  Oracle version: 11.2.0.3.0

  OPERATING SYSTEM: IBM AIX 7.1

  Number of cores: 4; Number of VCPU: 4; So that gives 16 processors

  RAM: 40 GB

  SGA_MAX_SIZE: 15G

  SGA_TARGET: 0

  PGA_TARGET: 1 G

  If you need more info, please let me know.

  Directly from the documentation.

  https://docs.Oracle.com/CD/E18283_01/server.112/e17110/initparams129.htm

  You won't get more 256 MB

• < Unspecified file name > file is larger than the maximum size supported by datastore '< indeterminate datastore >.

  I know that this issue has much spoken in the forums, but the answers are always to make sure that your block sizes are set to 8 MB - mine are already. Let me explain:

  I have a virtual machine with a large amount of connected storage - something along the lines of discs 10 x 1.99 to. Sit all VMDK on partitions of the VMFS of 8 MB of size block, including the configuration of the VM (location of the pagefile).

  Every time I try and snapshot of the virtual machine, I see the "< unspecified file name > file is larger than the maximum size supported by the data store ' < unspecified datastore >. All other virtual machines instant fine, but any other VM has a similar amount of storage as the VM problem.

  I have now moved the configuration files of the virtual machine to a new partition VMFS 5 of 1.91 TB, but the instant error persists. Most of the readers is sitting on VMFS 3.33 or 3.46. It will take me a while to move all VMFS 5 to see if that solves the problem.

  VMware.log for VM reports:

  2011-10-09T09:55:55.328Z| vcpu-0|  DiskLibCreateCustom: Unsupported disk capacity or disk capacity (2186928627712 bytes) is too large for vmfs file size.
  2011-10-09T09:55:55.328Z| vcpu-0| DISKLIB-LIB   : Failed to create link: The destination file system does not support large files (12)
  2011-10-09T09:55:55.328Z| vcpu-0| SNAPSHOT: SnapshotBranchDisk: Failed to branch disk: '/vmfs/volumes/4dc30ba3-b13c5026-92d8-d485643a1de4/spoon-app/spoon-app_2.vmdk' -> '/vmfs/volumes/4dc30ba3-b13c5026-92d8-d485643a1de4/spoon-app/spoon-app_2-000001.vmdk' : The destination file system does not support large files (12)
  
  

  My VMDK and volumes are smaller than 2032GB. I don't understand why, it's be a problem.

  Anyone have any ideas?

  Although ESXi 5 supports larger LUN as a raw physical devices (up to 64 TB), the maximum size of a virtual disk has not yet changed.

  André