Reports of changing CP senario scuh CPU, RAM based and exception systems

Similar Questions

• Missing data - Performance: CPU, RAM, disk, Net

  Hi, I would ask how to fix Capacity Planner not displaying no not Performace data on dashboard. Check the data of the "missing" view, Performance for the CPU, Ram Disk and Net are marked 'X '.

  Thanks in advance.

  Please see attached file...

  According to the screen shots data were collected only tree days yet. If I'm mistaken for reports display performance data, a minimum (not sure how many days) of collected performance data. Maybe there is something in the documentation!

  André

• RAM upgrade and Satellite A200 - 19K graphic card memory:

  Hi all

  The Satellite A200 - 19K came with 1024 MB memory system. It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop? I would like to add another a 1024 MB of RAM, is that the slot more be available?

  The second question is on the graphics card from NVIDIA. The product specification mentions the graphics adapter as below...

  Manufacturer: NVIDIAî
  type: NVIDIAî Geforcea? ¢ GB 7300 supporting Turbocachea? ¢ technology
  memory: 64 MB dedicated VRAM (up to 335 MB of total available graphics memory using Turbocachea? ¢ technology with 2 GB of system memory)
  memory type: DDR video RAM (resp. video RAM DDR and DDR system memory combined)
  connected bus: PCI Express 16 x

  My question is, after upgrade from 1024 MB to 2048 MB system memory, is that the card NVIDIA GeForce will be automatic upgrade from 64 MB to 256 MB for graphics memory?

  TAHNKS A LOT!

  Hello
  >, It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop
  I think that the laptop came with a module of memory 1 GB and the second Bank should be free.

  Now something about the graphics card.
  Well, the graphics card GeForce Go 7300 supports own graphics memory 256 MB (no shared memory!)
  But it also allows a dedicated memory.
  This amount of memory is variable and depends on the available main memory.

  I think that everything runs automatically and you will not need to change the settings to assign this memory dedicated after main memory upgrade

• Can I change CPU, RAM AND graphics in HP Commpac D220?

  Hello! Thanks to the time to read this topic, I have a question on my hp compac D220 pc so I hope you will tell me the answer!
  IM runing windows 7 now and try to install windows 8.1 but IE NX unsupported. So I decided to change my processor and the extra ram of 1 GB ad, and the new graphics card but I don't know that the graphics card & CPU (last) support my pc.
  Here is my pc in detail.
  1.80 ghz, 180 GB HARD drive and 1 GB of ram, motherboard AMIBOIS, Windows 7 running. So suggest
  me that I buy a new pc or
  change cpu, ram and graphics card.

  Hello

  As it is an OEM machine, you will not be able to replace the CPU this processor is specifically compatible with OEM motherboard. If you are looking to change the CPU, RAM and GPU, you really can both do you a favor and buy a new machine all together, or build your own.

  Kind regards

  Patrick

• Satellite A50 PSA50A - CPU, RAM, HDD upgrade question

  I wanted a laptop and my partner who is not real Smart PC (bless his heart) was released without my knowleadge and bought me a second hand laptop. That I really appreciate his kindness.

  I have a Toshiba Satellite model PSA50A - 7 k 047 number.
  I know a little PC, but not much I can change a hard drive and add memory and processor for a desktop computer but have little knowledge with laptops.

  This one has a hard disk of 40 GB and ram 240 and I guess is a Pentium 4.

  -What I want to know is how old is this model, and how much I can spend it.
  -What is the maximum memory, hard drive and it will take a Core duo.

  I've never had a Toshiba before but I heard that they are really good and reliable.

  Another issue is that I went into Device Manager and then system devices, and then the speakers, I found there was a driver that has not been installed. 82801DBM LPC Interface Controller - 24CC

  The reason why I ask is that I tried to plug in external speakers and they would not work, I couldn't find a speaker headphone and microphone port. I thought it's maybe because the driver above has not been installed. Anyone know where I could find and download the driver.

  When replying do not forget I am 50 years old and there are 5 years, I don't know even how to set up a browser, I taught myself everything I know now... I have 2 blogs and do a lot of marketing, but I'm not so good on the side of tech.

  Any help would be greatly appreciated.

  Pauline

  Hi pauline28
  Goo gle is your best friend... ;-)

  I guess it is 4 or 5 years...

  I am only guessing, but the limitation of the ram upgrade should be 1024 MB depending on the operating system and chipset...
  Take a look at the job (it can be downloaded on the website of toshibas)

  all the drivers for this laptop can be downloaded from toshiba too.

  the upgrade of the 120 GB HDD can work but there is no guarantee, perhaps that you have updated the bios

  the upgrade of the central unit is the most foolish thing to do... why?
  OK the cpu that works in your laptop be cheap
  core-duo won't work in this chipset/socket... (not sure)

  but make sure that this device will do things like surf the internet ;-) not in water ;-)
  play the music, if the driver is installed
  and the hard drive with 40 GB of space will be sufficient, if you put all your cds top ;-)

  It may be a good idea to pay a specialist for this 20 minutes to check and install the proper drivers...

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dashbord CPU, RAM, disk, Perf missing data Net

  I'm starting a new Capacity planner. Dashboard monitor-> show missing data, there is no data with CPU, RAM, disks, pref. Net on systems with Performance data (please see attachment file), but a data collector VMware capacity Planer 2.8 has collectd it. How do I troubleshoot it? Thank you

  I would recommend that you go to the '1. Put tab in place' and change the date range for the project.  I can see your username that you are Thai and generally the data send to Thailand would contain 255 x years (thai year) instead of 201 x.

• Pavilion DV8000 upgrade CPU, RAM, HD & OS

  Hello world

  I have a HP Pavilion Dv8000 (Dv8336ea is the exact model number).  I intend to upgrade the processor, RAM, hard drive and OS and have a few questions about the limits of upgrade on this computer.

  He is currently running XP pro, but I intend to upgrade the operating system to Windows 7 64-bit, if I can find an upgrade of the CPU 64 bit appropriate.

  The vehicle currently has an Intel centrino Duo CPU T2300, but I'm not sure which processors are compatible. y at - it an easy way to identify compatibility? I know that it can be removed, but what would be an upgrade recommended for optimal performance?

  Is there a limit to the size of the hard drive, can I install it? He had a hard duel disks. Is there a problem with the installation of a hard drive 7200 RPM? It's the BIOS that limits the size of the hard drive that can be installed?

  Finally, what would be the limit for RAM after CPU and operating system upgraded. What defines the limits of the RAM in a computer?

  Help with any or all of these Q greatly appreciated!

  

  Hello:

  The GeForce Go 7600 is a graphic adapter Windows 7 and should be able to run all the pleasure of the eyes in Windows 7 and have the same resolution that you had in XP.

  Try the latest nVidia driver released for it.

  http://www.nvidia.com/object/geforce_notebook_winvista_win7_64bit_179.48_beta.html

  I see that you have a wide screen monitor... According to the resolution of your screen, with the appropriate driver, he should be able to get 1440 x 900.  That should give you the view you've been waiting for.

  3 GB of memory can be used with a 4 GB max RAM capacity is perfectly normal, even with a 64 bit OS. You need the chipset Intel 965 for the 64-bit OS in order to 'see' all 4 GB of memory. You have the 945 chipset.

  Paul

• Security setting Internet properties continues to change on its own / CPU of the computer goes Haywire / 15 + Instances of dllhost.exe * 32 Com substitutes

  I have seen that this is a problem for more than just me by reading online about this.

  See:

  http://www.bleepingcomputer.com/forums/t/554044/slow-Internet-IE-security-settings-keep-changing/

  http://community.Norton.com/forums/trojanpoweliks-multiple-dllhostexe-32-processes-and-PowerShell-Windows-7

  I need the solution and you can't find it.

  Most of the places online say download all these other programs but never say what is really happening.

  I hope you guys can help.

  Windows 7 Home Premium PC

  THAT IS TO SAY 11

  I did add something new to my pc.  It started randomly happening...

  What I've noticed, is my computer will be stronger, as it is to wrap upward and the CPU goes crazy.

  After that research around these things, I noticed happen when this noise starts and the CPU going nuts:

  -Under Internet Security my settings changed on their own to custom

  (I then change them back only to have this all happen again minutes later)

  -When this is happening and I'm going under dllhost.exe Task Manager suddenly over 15 years * 32 Com alternatives pop up all at the same time

  I do stop by changing my Internet Security properties to default and putting an end to the tree of processes all the dllhost.exe * 32 Com substitutes.

  Then, about 5 or 10 minutes later it happens again. This has happened in recent days.  I ran safely scan and it found some VirToolWin32 - CeeInject.gen! KK (linked in Adobe Updater). This VirTool:MSIL/injector.BF has been removed but all that I mentioned above is still ongoing.

  I have apprecitate your answer. Thank you

  It arrived today.  I checked the updates as soon as I logged in and it was so maybe that fixed the issue.

  Update definition for Microsoft Security Essentials - KB2310138 (definition of 1.187.1412.0)

  I'll keep the links you posted and use them to check everything. I am running the Microsoft Safety Scanner again now, I ran it yesterday and he did not find anything.

  Another weird thing, all my update history disappeared. It says updated, ever. Now it only shows the update one alone that I did when I opened a session today.

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works

• I have 4 GB of RAM, but when my i play any game, my CPU fan runs at high speed and my system gets shut down within minutes.

  I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem

  If you overclocked?  If so, cancel that.  If the games you play are poorly written, it is not that you can do about it.  If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating.  For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts.  For a laptop, I'll ring gas compressed through the ventilation openings.

  Good luck.

• How to refresh the report region change which column of report selection list

  Hello
  I worked with apex 4.2 and I create a classic report with list (named loved) select a column in the list change in report, update the table with the new value via JavaScript (change) call and woke up very well, and I change the color of the line was updated to make it different from the other lines now I want to update to the report after doing update without submitting the page to show the new color of line update.
  I called javascript:apex.submit() in the update function, but
  
  My Question
  1. How do I refresh the report after change report column list without sending page
  2-can we enter column name selection list report to submit the Page to refresh the report area
  
  
  Thank you
  Ahmed

  See my answer above!

  Here's what I did:
  

  • Created two hidden page items
  
  
  • Created a dynamic action on the page with three real actions. (1) set the item values page. (2) to execute code to update the plsql table. (3) update the region report
  
  

  Thank you
  Vikram

• How can I get the Guest VM CPU, Ram, disk of VMware Tools?

  Hey guys,.

  I have a question for the information of the guest OS,

  I can use the SDK to get information such as the disk i/o of vCenter,

  But I can't the CPU, Ram, disk use on the comments operating system?

  I know vmware tools can help, but I don't know how to use the web Service to obtain, please do me a favor!

  Thank you

  To get the disk usage information in the guest operating system, you get "guest.disk" property of the managed object VirtualMachine. This will give you the total capacity and free space on each disk information.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.GuestInfo.DISKINFO.html

  For the processor and memory, you can extract the properties "summary.quickStats.overallCpuUsage" and "summary.quickStats.guestMemoryUsage" of the managed object VirtualMachine.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.summary.QuickStats.html

  I hope this helps!

  Neha

• Vs CPU Ram graphic card upgrade for Mac pro performance?

  Just after the crossroads to aboard the cloud to Adobe and seeks help on CPU Ram vs graphics card GPU.

  Material:

  • MAC Pro (early 2009) 4.1 2.26 Ghzdual core 8, 23 grams (5 x 4 g sticks and sticks of 3 x 1 G), 4 x 1 TB 7200 RPM int. HD (1 scratch drive), (no windows don't things here)
  • Graphics card Ge Force GT120 Machine has 64-bit capability, but normally starts in 32- bit due to old still used 32-bit apps.
  • Watch CS6 AE activity monitor uses all 16 son, works in 64 bitsand seizes about 10 Gig of ram to operate in.

  Software:

  • Running OS x 10.6.8. (Snow leopard) with all updates.
  • All major video applications: creative cloud (also have studio FCP 3 installed but just move to Adobe now on video works)

  I really like this AE & body use all threads, made in the background (which results in NO crashes (so far)) because my old 120 GT video card apparently is more stifling that it worked in FX in FCP 7 & 4 Motion.

  1. Q - can someone point me in the direction of how Adobe got the device to use all the cores and threads and run it in 64-bit, but starts in 32 bit?

  In terms of performance, (rendered in particular) I know I should go to the Apple/ATI 5870 graphics card, but as a veterinarian of fixed-income securities disabled, $450 is hard to find. I evaluated cards flashes, including those of macvidcards on ebay, but for used cards which are flashed, it gives me pause, especially when they are about the same price as the new price of 5870.

  So I am struggling with trying to figure out that the best shot for the less $$$, where the issue of the title.

  1. Is it more effective for video FX works to add CPU ram or (gulp) to upgrade the video card to 5870 card?

  Example: I can add sticks of 3 x 4 G in place and place existing 3 x 1 G sticks of ram for less than $200 CPU. A new 5870 card is $ 450 Apple. Approach that annoys me that most make speed plant put VFX work in AE CS6 or P Pro CS6?

  Sorry, I'm more than a little fuzzy on this, but hoping a kind soul will lead the way.

  Ken

  For After Effects, more RAM is better. For Premiere Pro, an improved GPU is more important. In addition, you might consider spending money even on an SSD, which is beneficial for both (for caches).

  See this page for more information on material for Premiere Pro and Adobe After Effects: http://adobe.ly/pRYOuk

• CPU, RAM and disk, file system information for the data, logs, temp, Archive for database

  Hello gurus,
  
  How can we see what size of CPU and RAM for the database? According to the previous steps of this great site, I could able to do
  

  SQL> show parameter sga_max_size
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  sga_max_size                         big integer 800M
  SQL> exit

  Therefore, the size of the RAM for the database to which I have connected
  

  rootd2n3v5# ioscan -kfn |grep -i processor
  processor    0  13/120         processor CLAIMED     PROCESSOR    Processor
  processor    1  13/121         processor CLAIMED     PROCESSOR    Processor
  processor    2  13/122         processor CLAIMED     PROCESSOR    Processor
  processor    3  13/123         processor CLAIMED     PROCESSOR    Processor
  rootd2n3v5#

  The one above was the command give the OS level that I don't know what information he gives and what database, since there are 12 databases on this server.
  
  How can I get the CPU information?
  
  And where can I find information for information of system data files, logs, temp, Archive?
  

  <div class="jive-quote">select * from v$version</div>
  BANNER                                                           
  ---------------------------------------------------------------- 
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi 
  PL/SQL Release 10.2.0.5.0 - Production                           
  CORE     10.2.0.5.0     Production                                         
  TNS for HPUX: Version 10.2.0.5.0 - Production                    
  NLSRTL Version 10.2.0.5.0 - Production

  Ask the system administrator if the database server is a physical machine, if it is hardware partitioned or created under a virtual machine Manager? Check the operating system utilities. On AIX uname to identify if you are on an LPAR.

  In Oracle, you can query the parameter $ v to cpu_count to see how many cpu Oracle says he sees.

  HTH - Mark D Powell.