"Cleaning up - please wait" forever!

Similar Questions

• My laptop is stuck at "Please wait" forever.

  After that almost a week of update of windows 8 to 8.1, when I connect my windows pc slain to a "Please wait" in the start menu forever, there is a Cancel option but it does not work, I can't reach the office, or anything like that.  I picked up the phone once but the problem came again!

  I called the team support and solution soved by the following steps:

  1. connect to the affected account
  2. Press the Windows key + L to lock the computer
  3. Switch to a user who has administrator privileges account
  4. Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
  5. find restoreoptin.exe & end task this process
  6. return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
  7. Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
  8. Select Skydrive
  9. Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
  10. logout and log of refund in
  11. you will be asked is no longer with the blank screen 'Please wait '.

• Acer laptop, I have a rectangular box at the bottom of my screen saying, treat the 10/10 cleaning please wait, with a green circle going round, its been there for 4 months, how can I get rid of it please

  Acer deal 10/10 cleaning please wait, this is what he says in a toolbar at the bottom of the screen, cannot get rid of

  http://support.Acer.com/

  Acer support at the link above.

  They will help you with your software Acer Acer support problem.

  See you soon. Mick Murphy - Microsoft partner

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• uninstalled applications, received message: Please wait until the current program has finished uninstalling or one. After several reboots, still same message.

  Original title: 2 numbers do not know if they are related

  I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.

  Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.
  I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.

  Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.

• Vista stuck on "Please wait" after startup

  I have a laptop Toshiba A300 nine, with vista installed at the factory.
  After a few windows automatic updates, on reboot, vista will load and that
  ever present on the screen 'Please wait '.

  I see a disk activity. However, even after 30 minutes, he can't login screen.
  In safe mode, I have disabled the service of .net framework, but it did not help.
  I tried to use the ntbtlog.txt to learn about what his impasse, but could not understand it.

  Cause any ideas on how to diagnose the root, or even better, a solution will be very appreciated.

  Hi dbbd,.

  Thanks for the answers on the community forum.

  This seems to be defined as you said it happens after a reinstall of ITUNES.  Why don't you try not running through the steps in a clean boot process to determine exactly what conflicts with this configuration.

  Try step 1 clean boot and see if you get the error, otherwise go to step two, then step 3 and step up to the process that blocks the start is identified.

  Article for the clean boot - http://support.microsoft.com/kb/331796

  After you completed the steps in identifying the issue, please be sure to follow the procedure described in step 7 to bring your system back to a normal state.

  Thanks, keep us informed on this issue of what is identified as the conflicting service.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please wait screen

  A computer of mine stays on the screen "Please wait" after a reboot. But even the save mode does not start. This means that I can't watch in the eventvwr or changing the msconfig. I started the computer with F8 for a restoration of the system, and even when I use a restore point of serveral day back it still hangs on the waiting screen please.

  W_Q

  Well, if you can't really get anywhere you have to do a clean install. But in SafeMode if you access the system restore you may not be in the boot. In the safe, you should try the "FUCTION KEY THEN + R WINDOWS" it should ask you 'RUN' maybe you can try to run the system restore, or try to create a new profile.

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• "Unknown popup window titled" information "appears with the message please wait a few moments.

  Original title: window unknown popup

  I'm under THAT XP SP 3 fully updated; Mozilla Firefox version 7.0.1 - I keep getting a small pop up window titled 'Information' with the message: Please wait a few moments. It has a small clock on the left side of the field. Only momentary and random. I ran Mcafee virus scan and webroot spyware with no prob on either. Is this some sort of spyware or what?

  Hello

  1. find this jump up while working on Mozilla Firefox?

  I suggest that you initialize in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.

• HP 15 Notebook PC L3Q92EA #ABU: HP Pavilion, 8.1 Win "Please wait" when the unlock screen saver

  Just bought an HP 15 Win8.1 running laptop.  I think it's a huge pain to use.  Once the screen lock is committed, it takes forever to get the login screen to appear.

  I move the mouse or press a key to get the screen to go back, but I see is the screen "Please wait" for more than a minute then a background appears.  Click the mouse and I have one more minute of "Please wait" before the logon screen appears.

  Can anyone help, until the laptop goes through the window?

  Hello

  Thanks for posting your concern on the Forums for Support and sorry about the problem you are having. I went through your post and it sounds like I should be able to help with the problem.

  I suggest you perform the test (Test of the HARD disk) on the computer. Follow the steps below-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F2 - System Diagnostics.
  • HDD test would be under the Test component. (usually, it is recommended to test rapid and wide, but for now because the PC is new I rather suggest you simply run the Quick Test).
  • After you choose the Quick Test, click on run once.

  If he succeeds, you can proceed with the recovery, part if she fails to give a call to tech support at the number mentioned below, since the unit is under warranty, you should be able to get help to get the drive replaced.

  On the recovery procedure, its complete restoration of unit settings factory which means that the data on the computer is cleared and with it, the software that can be installed on it. Please follow the steps below to perform recovery-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F11 - system recovery.
  • On the next page of options, you can choose - "troubleshooting." (If it is a unit of windows 8, or you can skip this step)
  • On the next page, you will need to choose "Recovery Manager". (If it is a unit of windows 8, or you can skip this step)
  • On the next page in the first column, under "I need help immediately", you must choose "Reduced Image Recovery"
    • Now, here, you can get an option to backup your files, because it would be an option to say - recover after saving files or recover without backup of data.
    • You will need to insert the disc followed the screen - instructions here on and unit should be returned to its original state.

  Now if you need help email us back or call HP SUPPORT @ 1-800-474-6836 [24/7 SUPPORT].

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Suddenly - whenever I right click on 'New' in 'my documents' or on the desktop or in a folder, in order to create a folder or file, windows says "Please wait while that corel suite 11 is installed.

  Suddenly - whenever I right click on 'New' in 'my documents' or on the desktop or in a folder, in order to create a folder or file, windows says "Please wait while that corel suite 11 is installed. I click on cancel, but it keeps coming back. I have not Corel. If I click on cancel about 13 times it finally stops! But I can't use right click on 'new' installation at all, it seems. Also I have problems with Outlook - I wonder if I need to re - install Windows XP or is there a simpler solution?

  Thanks for yr help.

  Yes, Outlook often think files 'have not been closed properly' and takes forever to 'check' the. I give him extra time to close before stopping computer...

  Aeoliansands,

  Welcome to the Microsoft Answers community.

  You can download and run the Installer Cleanup utility:

  http://download.Microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe

  - or try reinstalling Corel.

  Your second question is related to Microsoft Outlook and would be better suited in the Groups of Discussion Outlook. Please visit this link to find a community that will provide the support you want.

  I hope this helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Please wait so that the State of cofigures of windows"

  At startup, an Info screen says "Please wait so that the State of cofigures windows" must be closed 10 + time to disappear.

  Hi Gebby,

  1. are you able to boot to the desktop?
  2. did you make any changes to the computer before the show took place?

  Method 1
  Step 1: I suggest to start the computer in safe mode and check if that helps.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to boot to the desktop, and then perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 3

  Run a full scan with your antivirus software with some type of malicious software removal.

  http://www.Microsoft.com/security/default.aspx

  Method 4

  If you are not able to boot to the desktop, and then do the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• I start up it will show Windows Vista family premium down then in the middle of the screen will see the Please wait

  I have an Aspire X 3200 desktop PC. And I also have Windows Vista Home premium. When I boot it it will show that Windows Vista family premium down then in the middle of the screen will show it please wait... but it won't load at all. It will do nothing and just freeze like that all the time. Like now, I have to use my laptop able to do anything. I hope I can get help because I would like to use my desktop instead of laptop.

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Step 1:

  Start in safe mode and check if the problem persists there.

  How to start Windows vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, and then put the computer in a clean boot state and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Startup Repair tool and check if it helps.

  Startup Repair: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  If method 1 and method 2 has not helped, then perform the system restore from the recovery system to a restore point option when the computer was working fine.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope the information is useful.

• "operations are underway. Please wait. The machine switches off automatically '-system never stops.

  Sometimes, when to stop Vista, instead of a normal shutdown, I get quite common background and a message reading: "operations are underway. Please wait. The machine switches off automatically. "The system then continues to run indefinitely, and I finally have to do an emergency stop. After the reboot, I then most of the time have to do a restore to an earlier point; Once in a great while, he'll tell me the test stops abnormally and charge really. Tried to figure what could be causing it and can't find a logical reason. Diagnosis never found anything, but there is not really anything in the windows which diagnosed something as a shutdown of the system.  Help.  It's boring.

  Hi Baron Stewart,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then try to stop

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)