Request could not be processed due to the error:

Similar Questions

• Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

  I tried to backup my C folder on a hard disk extrenal and received the following message:

  
  OT: Backup failed Windows7 0x8078002A error Code.
  Quote
  One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
  End of quote
  Can someone advise me?
  Nitin

  Hello

  Method 1
  Check the shadow copy Volume service in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. Locate the Volume Shadow Copy service

  Make sure that the startup type is automatic. Steps to set the auto services

  a. Locate the service

  b. right-click on the service

  c. If the service is stopped and then starts the service

  d. Select Properties

  e. and in startup type, select automatic

  Method 2
  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How important is the KB2724197, could not be installed due to the error

  I have a seller who provides us with a program for bookings back, yes BACK I know not.

  But today we received an error of a memory problem in BACK program and the seller said to uninstall the update of KB2724197 of all machines.

  But from what I read, it's a very important update to stop a vulnerability?

  How can I explain this to my boss if the seller can't come back and say that it must be removed and uninstalled and never installed on any machine again?

  The seller is not a very nice person and I'm afraid my boss thinks he knows best, they are friends, so I need ammunition to be able to install it because the seller is unwilling to settle his old junk BACK program which is only 16 bit

  or can I skip this KB and continue?

  Thanks in advance

  The fix for the issue of the missing UMB was released today for Windows XP and Windows 2003.
  Here is the link:
  http://support.Microsoft.com/kb/2785487

  Thank you for your patience.
  Thomas Gschwandtner

• I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

  I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

  Hello

  What is the exact error you receive everything trying to uninstall this program?

  Try to Uninstall the program in a clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

• TMS background event could not complete successfully due to an error.

  I get email once a day of TMS with this problem. Anyone know what this means?

  Screen-Shot-2016-05-18-at-5.03.34-pm.png

  

  If you look at the article from the event log, it tells you exactly what the issue is:

  Could not update system with IP address x.x.x.x and name xxx.  No contact with the system.

  This means that the TMS could not update the directory that is assigned to this endpoint, because it might be offline or TMS uses an old IP address when it tries to him are provided.

  The message saying "Some, but not all systems updated" means that TMS was able to update the directories on any other endpoints without problem.

• Photoshop could not be initialized due to an error in program

  Today, I became a member of the creative cloud with Photoshop and Lightroom.

  After installing Lightroom works allright, but after starting Photoshop, I get the message that Photoshop could not be initialized because of a program error.

  I run the cleaning of CC, but unfortunately no effect tool.

  System: apple imac 3.2 Ghz intel core i3 4 GB 1333 Mhz DDR3

  OS X version: 10.9.5

  I hope that someone found a solution?

  Kind regards

  Mr. Verbiest

  Hi Jeff, thanks for your suggestion. In the meantime, I had several contacts with the support of Adobe. Finally, we arrived at the conclusion that the error was caused when the conversion of the colourtables.

  Then on my computer (imac OS X), we looked for color adjustments. Here's the System Library / Application Support / Adobe / Color.

  We have renamed the colorsettings by adding at the end of the file name and restarted Photoshop .old. Very good start Photoshop and the problem was solved!

  Thanks to the fantastic support of Helpdesk!

• Can not access my MSN page the last 36 hours. I get the message "your request could not be processed at this time, please refresh this page or try again later." All the suggestions/help appreciated!

  Nothing has changed on my computer that I know. I use my MSN for my homepage & have had no problems with it before.

  I finally found a solution that worked for me.  I whitelisted and had to disable to My.MSN.com & refresh the page a couple of times.  Strange that it wasn't a problem until 3 days ago - hope this helps some of you!

• Received error message this message could not be sent due to the size of the field limit

  Messages come in saying that the size of the field limit, messages to be delivered. How can I fix?

  Bobrm2:
  Thank you very much for the comments, this can help others.
  Good to hear everything is now ok.

• Silverlight could not install on MAC with the error "404 error server...". »

  I uninstalled silverlight and emptied the trash, but when I go to install and open it for all my downloads, I get the 404 code. any help would be appreciated. Thank you

  (IE Version unknown)

  Original title: I can not install silverlight to work on a mac. All I get is file server error 404. any help?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on the Silverlight Forum public.

  Please post your question in the Silverlight Forum.

  http://forums.Silverlight.NET/

  Kind regards.

• How can I reinstall PSCS6 after uninstaling due to the error U44MIP7?

  I had to uninstall my PSCS6 of my CC, because it could not be updated due to the error U44MIP7 and

  I don't know how to reinstall, can someone help and thank you

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• Trouble with my email, I try all I get the following, windows update cannot download files due to the error 3048,3...

  original title: what is 3048,3

  I have a problem with my email and everything I try the update of windows I get the following, can not download files due to the error 3048,3... Thank you

  Hello

  ·         What mail client do you use?

  ·         Update you are trying to install?

  ·         What is the full error message that you receive?

  ·         What is the exact error message that you receive by email?

  I suggest to reset Windows Update components and check if it helps.

  See the Microsoft KB article below:

  http://support.Microsoft.com/kb/971058

• Group Policy infrastructure failed due to the error below. The specified domain does not exist or could not be contacted.

  using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error

  Group Policy infrastructure failed due to the error below.
  The specified domain does not exist or could not be contacted.

  Note: Due to the GP Core failure, no other component processes Group Policy policy.  Consequently, status information for the other components are not available.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

  When copying the files, I get this error which is lower than
  an unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:
  error 0 * 8007045D: the request could not be performed because of an i/o device error
  filename DSc02828
  file type jpg
  size 3.27 mb
  updated the 09.11.2012
  try to jump again cancel
  Whats wrong here

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. where exactly you are trying to copy the file?

  Run check disk on the computer.
  a. click Start , and then typecmd.exe in the start search and then press ENTER.
  b. right-click on cmd.exe and clickrun as administrator.
  (c) in the command prompt, type the following command and press ENTER.
  Chkdsk /f
  Note: You may be prompted by a yes / no question. TypeYes and press ENTER.
  d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  
  Summary the link:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272

  Just reply with the results. I'd be happy to help you further.