Request Firmware of blackBerry Smartphones


BlackBerrys have ALW? AYS took a long time to start.  2 to 3 minutes is normal.  No update firmware will change.  It is the nature of java.  The more 3rd party apps install more there, as well.  The device must read and load each of those. The firmware update will not change that.

If you just turn the power off using the switch it only takes a moment to turn back.  It takes 2-3 minutes if you remove the battery to reboot the device.  He must do the same thing that made your computer.  It is not uncommon for a computer to take a few minutes to initialize and the more programs that are installed and asked to run at startup, the slower, it will.

Tags: BlackBerry Smartphones

Similar Questions

  • Update the Firmware of blackBerry Smartphones in Windows 7 with BlackBerry DM 5.0

    Hello

    I know that Windows 7 is not a supported environment, but finally, someone can help me

    DM 5.0 works in my eyes very well under Windows 7! My only problem is, I installed a new Firmware Pack of BlackBerry. But when I connect my "BOLD" the DesktopManager BB tell me, no new version not found!

    But there is a new version under "C:\program files\Common Research In Motion\Shared\Loader Files\9000-v4.6.0.297_P4.0.0.243"

    Is there a solution for this problem?

    thx for your help

    Yves

    Did you delete the vendor.xml file?

    Go to c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  • Firmware of blackBerry Smartphones

    Hi all

    a good recommendation for firmware for curve 8320?

    and please give me a link

    Thank you

    The most recent is the best available.

    Link for download and instructions.

    http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/196417-latest-OS-8320-4-5-0-255...

  • Request for information/blackBerry Smartphones: where is the address book/contacts stored in the BB Torch 9800

    Hello everyone, could someone tell me where exactly is the address book / contacts stored by default in the BB Torch 9800, IE; in memory of mobile phone, the SIM card (I don't think) or in the micro SD card card (multimedia card)? Thanks a lot for your answers. Best regards, Eric

    Edit: Deleted email. At any time if you provide personal information to any other Member of the community. Please visit the Community Terms & Conditions and community support guidelines for more information.

    More precisely in the device memory. Not in the media card or the SIM card.

    It is where they are stored by default and cannot be changed.

    You can save contacts to your SIM card, but only one number per name, no address, no email address, etc.

  • Phone and blackBerry Smartphone installation last firmware update starts

    Info on the device

    Carrier: Bell

    Model: BlackBerry Bold 9780

    OS version: 6... something

    I have BlackBerry Protect and made a backup yesterday (July 30, 2012)

    Apps and free space

    A battery pull fix your problem?  After trying to install the latest update, which continued to install after 4 hours, I pulled the battery.

    When you write your question

    How can I get the load to the top of the screen to access my phone?

    My phone had OS6 installed at the time it was released. Today, I decided to update to the latest version of the OS6. I downloaded the update through my device, and then click the button install. There is a prompt message warning that the installation can take 2 hours or more. After 2 hours, I started the monitoring device and noticed that there seems to be a pattern to the load up screen. 1 loading screen screen 2) black with LED light red 3) the load screen and then ends with a bright white screen 4) back to the black screen with LED Red 5) repeat this pattern.  I waited another hour to see if there was no change in the situation, but nothing. So I did a hard reset (battery pull). After waiting 5 minutes, I put the battery in and now I get this screen load pattern.

    How can I pass the loading screens to access my phone again?

    How do I erase and reload my camera?

    If I erase and reload my camera, can I recharge my BlackBerry protect the back upward?

    I would greatly appreciate any help or advice on this matter as soon as POSSIBLE!

    Hello and welcome to the community!

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.
  • Software updates of blackBerry Smartphones

    My BlackBerry 9930 cannot send request for available updates via the wireless network

    EmmanuelSmith911 wrote:
    I tried and nothing has changed,

    Hmmm... Sorry to sound as I do not understand, but well I don't. Does this mean that the steps, has worked exactly as described, but do not resolve the symptoms you have described initially? Alternatively, the steps even not worked exactly as described?

    EmmanuelSmith911 wrote:
    I'm starting to think that this could be the it policy which could cause this problem. How can I remove the it policy?

    It is possible. But if you stay on BES, you cannot remove the it policy... you have to work with your BES admins to solve the problem.

    If you are not on BES, you must first check if you have a latent policy on board:

    • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

    If you have one, then this is the only method to remove:

    • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    Beware you warnings... it's completely destructive to everything you have on your device now, then you must know how to recover from that after the withdrawal of the policy. If you choose to use the backup/restore as your method of recovery, so make sure you do selective and not wholesale... If you restore databases who say company policy or something similar, then you just put it on your device policy, and be right back where you started.

    Good luck!

  • Can someone help me please to find the number of sms sent from blackberry smartphones?

    Hi all

    I'm new to the blackberry smartphone application development. My requirement is to manage the sms sent from a blackberry smartphone like finding the number of SMS messages sent, the destination not like that. I tried running messagelistener, sendlistener and outboundmessagelistener, but something did not work well. So can someone please help me to solve my problem?

    FYI: 1. I've implemented outboundmessagelistener but couldn't find a way to add this port for listening to my request.

    2. I set up sendlistener and added to my application of the method SMS.addSendListener which does not also carry out my requriement.

    So, please help me if you have an idea in these aspects.

    Thank you

    Sanath

    FOR INFO:

    Import net.rim.blackberry.api.sms.OutboundMessageListener;

    SerializableAttribute public class MainClass extends UiApplication implements OutboundMessageListener

    {

    Public Shared Sub main (String [] args)

    {

    PAP MainClass = new MainClass();

    To make the application enter the thread of events and start treatment

    messages,

    We invoke the enterEventDispatcher() method.

    theApp.enterEventDispatcher () ;}

    public void notifyOutgoingMessage (message Message)

    {

    If (this instanceof text message)

    {

    Here you can not manually counting the SMS

    }

    }

  • BlackBerry Smartphones update Blackberry Bold 9780 without USB cable

    Hi guys I had a bold 9780 I want to update the most recent operating system, but my USB port is not working can I update by another route.

    Hi Nivesh3838

    If you want, then you can consult:

    KB15644 : how to request an update to BlackBerry Device Software wirelessly on the BlackBerry smartphone

    But please note, never carry out this OTA update without a backup of the appropriate device.

    Good luck.

  • BlackBerry Smartphones BlackBerry9900

    Hello

    I recently picked up a Blackberry 9900 in a taxi with two sim cards, an insertion Vodacom and cell C on the cover, I stayed with him for a week, as he had an expppecting Ppassword the owner on the phone but nothing, he ended by saying "phone not allowed MM6" and I ended up removing the sim card because they have codes ficche also and I reset it I ended up him, but it is not the signal loading, please help me RIM team.

    I have two own phones a Samsung S5 and BB 9780, please help me to unlock the network.

    Kind regards

    Iqulusi

    OK, so you need to start with is the following:

    • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    The steps of the WIPE removes prevention device-lock password and return the unit to (almost) a State of "new factory". If the device is locked by password, then you just keep trying until exhaust you all attempts, how much the device will perform the WIPE to remove this password.

    Be aware, however, that it didn't is not held here which may have to be performed by the actual owner of the disk... for example, the former carrier may refuse your request to release the BB ANKLE of their BIS system so that you can have your door - create an account BIS for the device. You are not the owner of the disc with that carrier, but as you go through the required legal process, the police various or other reports that you hold some sway with the former carrier.

    In addition, it is possible that the previous owner reported to their carrier (and other authorities) as lost, and the unit may now be on the blacklist, which will prevent its features on any carrier anywhere, anything else is done. But, again, these official reports, you have maybe a few extend.

    You do not want to check if the device is carrier unlocked or not... If not, then it can only serve as it is originally made for door. Reference:

    However, even if unlocked, so also reported as lost, then it still won't fully work on any medium. Except again once you use your police service and other reports as stabilizing with the carrier imposed on the lock.

    Also, be aware that no BB devices are universally functional on all carriers. First, each model is made with only a few radio technologies and frequencies that the unit can operate with... and can operate on carriers that operate on those. In addition, each carrier decides what specific device model numbers that they will support for these features BB... If the carrier does not have this device as supported for automatic broadcasting HRT and address book maintenance, then full BIS functions may not be possible, even if it is consistent with what the carriers of radio signals.

    You have a lot of work to do. Good luck and let us know!

  • BlackBerry Smartphones BB Desktop software will see Torch 9800

    I installed BlackBerry Desktop Software 7.1 (twice from different sources) on my Windows 10 PC.

    1. after starting, I always get the request to connect the BlackBerry smartphone. I did with a USB cable, the application does not disappear.

    The Blackberry is recognized, Windows Explorer opens and displays the files on drive F:\

    2 blackBerry Desktop Software is worrisome to running applications. 2013 Outlook gets an error after certain actions (I close it), same Excel application is destroyed.

    3. I use the Windows Firewall and Avast Antivir. If I turn it off, there is no difference.

    4. There are the 'BlackBerry Device Manager' three times running background processes.

    Are the only things I want to do: get my list of Outlook contacts, possibly calendar or software updates.

    Y at - it an alternate option to load the list of contacts to my BlackBerry Torch?

    Thank you for your help

    MOD EDIT: Subject changed to reflect a new topic

    An Assistant came and did all right!

    Everything works very well, I don't know why and I don't really have the time to research.

    If it was a human sorcerer thank him/herself.

    Norbert

  • BlackBerry smartphones 'there is a problem with Blackberry App World. Please try again. »

    Whenever I try to download whatever app world or click on my world, he always says 'there is a problem with the Blackberry App World. Please try again. "I can't download apps because of this, and I have consulted with my carrier in this respect. They said I should be able to access the universe of the app by wifi since I'm subscribed to a data plan Blackberry (BBM). They don't know what to do with my problem anymore. Everything else works except the app world. Help, please. BTW, I'm trying to access the app through a mobile internet captive universe. That this has something to do with it?

    Hi trishthestranger

    Please uninstall AppWorld options > device > application management.

    Scroll down to BlackBerry AppWorld > delete.

    or KB10040 : how to view or delete the application installed on a blackberry smartphone

    Perform a restart on the BlackBerry this way: with the phone smart BlackBerry turned on, remove the battery for a min. and then reinsert the battery of waiting until it reboot.

    Now, since your browser BB go to thewww.blackberry.com/appworld and install again.

    After installation go to app world and see if you are able to download on a PC, you can also try to scan the barcode of this application, it will request a download link on your device. Please try it and let us know. But like I said try to download Over the Air.

    Prince

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • BlackBerry Smartphones blackBerry 9380 no option "send via bluetooth".

    am I missing something? It drives me crazy. I can very well receive files, just cat find a simple way to send files via bluetooth. Even when I goto the send option I get only send by e-mail, etc.

    I'm on 7.0 Bundle 2220 (v7.0.0.513, platform 9.32.0.51)

    To do a firmware update or install something? I think its stupid how he does not come with this option as standard, I have also checked my sisters bb torch, which doesn't have the option

    Hello and welcome to the community!

    See this KB:

    • KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones

    If your device is non - BB, then substitute in the KB, the instructions appropriate for your device. Unless you're on BB OS 6 or 7, do not skip the step of "Receive using BlueTooth" on the receiver BB... nothing will transfer if you do. I can tell you that on my BB, if I navigate to a file (for example, image, etc, using Homescreen > media > > explores), and then when I press on the key, I have available ' Send', with 'BlueTooth' as one of the submenu selections... so I'm not sure why yours does not. Maybe if you detail the steps that you try, we might be able to spot something.

    Good luck and let us know!

  • Automatic synchronization with handsfree blackBerry Smartphones

    Can I set up my device automatically accepting the request of my hands-free sync. For now, I have to manually accept each time I get in my car?

    Hello

    No, no, what you are experiencing is certainly not normal... BBs can, when properly configured, automatically connect to compatible car kits. See this reference:

    • KB18576 The BlackBerry smartphone always invites you to connect to a Bluetooth connection instead of the automatic connection

    The problem is that, if there is a similar setting inside your car kit who also needs adjustment, then there is no way for RIM to provide statement... you will need to return to the installer you originally used.

    FYI... your desire to 'just phone a Helpdesk of RIM' is admirable, but moved. When you bought your BB and subscribed to services, you have learned how the BB support model works. RIM has no service support for you in the ring upward. Rather, the model of care is distributed with carriers and authorized dealers taking primary formal support to their end users, with the possibility for them to escalate if RIM that they cannot resolve.

    Good luck!

  • BlackBerry smartphones can not open the eyebrows of internet

    I ca not open internet or the accsess my Id eyebrows, always have an massage as my eyebrows is bloked

    can not set up my new email or ID

    Hello and welcome to the community!

    Since little information, we unfortunately have to make assumptions... the content accurate and full of error messages is always more useful than a short short description.

    So here's my proposal? Is there a COMPUTER policy on your device?

    • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

    Is there and you're on BES, then stop now and go talk to your BES admins... they control everything.

    If there is and you are not on BES, then you need to clean your unit of the it policy:

    • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    Be very attentive to provided warnings, particularly the fact that your device will be wiped clean in the process. You can find adequate instructions to backup via the link in my sig auto on this post. But, when you restore, do not full restore... restore instead, only those databases you requested (e.g., calendar, contacts, etc.) and more precisely to avoid restore and data bases that have nothing to do with politics, COMPUTING, business, or anything similar. If you restore the databases, the it policy will be conscientiously restored to your device, and you will be right back where you started.

    If there is no COMPUTER policy, contact your mobile provider for formal support.

    Good luck and let us know!

  • BlackBerry smartphones can not open the downloaded applications

    I have a blackberry 9360 and it's great, the only problem is that some applications don't download, same if I'll buy them and others will download but does not open "Phone Warrior will not work without the requested permissions" I accept all requested permissions, but it still does not... Can anyone help?

    Hello

    If you've got reliable sources (e.g., BBWorld) apps and they are therefore particularly compatible with your device and the OS level, then it is possible that you have a policy COMPUTER on Board that is blocking them. Reference:

    • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

    If you indeed have a political TECHNOLOGY and are part of a BES and environment, then stop now and contact your BES admins for help... only they can tell you if what you're trying is against them.

    If you have a COMPUTER policy and are not part of BES, then the question arises why the it policy exists on your device. In general, it's because you got 2nd hand device and the seller does not correctly clean it... refer:

    • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    But even without the seller, as long as they did everything in their section of the KB, you can always clean the device of the it policy. The process is to destroy everything, please first review the link in my sig auto on this post for a full and proper backup procedure to follow.

    Once you have this full backup, to proceed with this:

    • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    Thereafter, proceed to restore your applications and data, but DO NOT make a full restore... instead, only a selective restore of the databases you really need (e.g., contacts, calendar, etc.) and specifically avoid restore databases that have nothing to do with politics, COMPUTING, business , or anything similar - if restore you those, he will dutifully restore it on your device policy, and you will be right back where you started.

    Good luck and let us know!

Maybe you are looking for