Request request extension co PowerVault MD3600i [CF]

Similar Questions

• Dell PowerVault MD3600i validation error - unable to update firmware - Data:

  Hello

  I have the following problem when trying to upgrade the firmware version of 07.84.44.60 to 07.84.47.60 on my Dell PowerVault MD3600i.

  Assistant firmware upgrade RAID controller module reports the following error

  • Data validation error: the storage Bay cannot be updated one or more host entries in the Module of the RAID 0 controller did not match those of the RAID 1 Controller Module. To resolve this issue, contact a technical support representative.

  Can not find any similar problem on the net, if anyone here can help me please

  There are a few things you can try. If you have configured multiple paths you can remove one of the controllers, wait 5 minutes and then put it back and try to do the update. Or you can try to clear the log of events and then update the Firmware.

  Let me know how it goes and if you have any questions or concerns.

• PowerVault-MD3600i connection problem

  Morning all,

  I was invited to deploy a Dell PowerVault MD3600i as an ISCSI for a Windows Server 2008R2. I have never used this system before, so I'll explain what I have step by step:

  1. I connect the Dell MD 3600i on the management port to the hand Switch (Dell 192.168.2.5)

  2. form the Windows Server 2008R2 (192.168.2.3) I was able to run DOSS and find the MD3600i.

  3. I connect the Dell MD ISCSI Port 1 and the second NIC in Windows with a Cat 6 UTP server.

  4. on the server of Windows, the second NIC (192.168.2.10) and on the MD3600i Dell the ISCSI port 1 (192.168.2.11).

  The problem there appear when DOSS I am trying to connect this link, I get this error:

  

  Thank you for your support.

  Francis

  Hello Francois,.

  Here is a link to the deployment for the MD3600i guide. If you follow the guide, it will help you to solve your problem for you. FTP://FTP.Dell.com/manuals/common/PowerVault-md3600i_Deployment%20Guide_en-us.PDF

  Please let us know if you have any other questions.

• New seagate drive hard 6To and powervault md3600i

  Hello

  We have a powervault md3600i and we plan to buy new hard disks to increase its capacity

  We recently encountered this model: http://www.seagate.com/fr/fr/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-capacity-3-5-hdd/#specs

  It is a Seagate 6To sas hard drive

  We wondered if current firmware could support these disks. and if not, is it planned in a future firmware version?

  Thanks for your replies

  Hello jtetillon,

  The latest current firmware for the MD3600i will not be able to take over the disks. These drives also have a 12 GB SAS connection & the MD3600i has only 6GB connections for readers. Now our latest MD38xx of MD34xx & maintain the 12 GB but currently these drives are not supported on the latest firmware as well.

  I would say that if these drives should be supported, it would be on or systems MD34xx & MD38xx, but I don't know in which version of firmware that will be available on.

  Please let us know if you have any other questions.

• Try get job PowerConnect 8132 + PowerConnect 8024-k (Switch Blade) and PowerVault md3600i on 9000 MTU

  Try get job PowerConnect 8132 + PowerConnect 8024-k (Switch Blade) and PowerVault md3600i on 9000 MTU

  Everywhere I put 9000 MTU (Jumbo frames)

  My systems host is 2 x M520 with Broadcom 10 G (2 ports) mezz card

  On the 10G card that I am trying to get link iSCSI work with storage, but the work than the MTU 1500

  The M520 installed Linux CentOS 6.4 (where I've implemented the 9000 MTU)

  My scheme is:

  

  Please help :)

  Hello, Daniel.

  Problem solved. It's strange, but all devices have started working after restart 8132 switches. :)

  Thank you for your help.

  Good bye.

• Request quotazione disco PowerVault MD3200i co-URGENT fuori [CF]

  Buongiorno,

  quotazione by no. 1 hard - 500 GB disk richiedo near Line SAS 7,200 rpm 3.5 "disco rigído

  auswechseln da in una PowerVault SAN MD3200i di cui riporto it service Tag which di seguito: 41PQY4J.

  The macchina e da poco fuori co.

  By Armony contattatemi just possible

  Grazie

  Buongiorno, the sto contattando by mail

• Request assistenza by PowerVault 124 t.

  Buongiorno,

  con bands abbiamo UN PowerVault 124 t. charger it provider di sul display error message: ' Fan works not ", ho soffiato the fan my he problem persists.

  If line preventivo by riparazione; the macchina e fuori co

  Grazie

  buongionro, the ho mandato UN message by mail.

  Francesco

• hide the controls of snapshot

  How can we hide snapshot of the vm view orders in the catalog? We don't want anyone creating snapshots from here, only the power and console commands.

  Now you get just deeply in this...

  The following is not for the faint of heart!

  You need to sign in as an administrator of LCM and go into your Configuration tab.

  From there, you need to create a new button to the right pane of the catalog (catalog / right box / keys)

  Set the class to "vmo_prolongation_action" - that it will be using the same icon as the original button.

  Heading the workflow named "Request Extension" button and give it an appropriate name. When your done with that, you will have a button that shows once again for everyone and will not automatically the request token defined... therefore, this means that you must use vCO Client to export the resource file... Then, launch the client of vCO and get connected.

  Expand the section of resources on the left, and then explore the Applications\Lifecycle manager\CustomWeb\ClientCustom

  Once there, you will see one or more listed items. One who must be named customWebCatalogButtonsRight_0.html - which is that you need to do a right click, then choose Save to file.

  Now open the file and edit the content...

  You should start by ensuring that only an administrator can see the button. You do this by adding the following in the first line:

  "< jwcid="@vmo:IfMemberOf vmo "attribute ="attAuthorizedAdminGroup">

  Now go to the last line and enter the following information to complete this test If:

  < / vmo >

  Then, we must ensure that the button appears only if the virtual computer is in the 'available' State, then, under the first line of the file (our newly entered case statement), enter the following information:

  "< jwcid="@If vmo "condition =" ognl:get('secondaryTokenState') == 'available' ">

  Again, go to end of the file and place another:

  < / vmo >

  to close the additional if statement.

  Your final code should look like:

  ! Screen shot 2010-07-20 at 3.38.43 PM.png | thumbnail = true!

  Once the code looks like this, save the file, then return to vCO Client, right-click on that element of resource again and this time, select "resource update.

  Find the updated file and select it.

  Now, back to the Web of LCM interface as an administrator... Click the Configuration tab, then click on the "RESET CACHE" button

  Now test and let me know if it worked

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• ANE native Flash cs6 publish problem

  Hello! I had a lot of chance to download and test flash cs6, but there are problems with the function of publication directly

  After that I added a donkey file, I get this error:

  DVFreeThread - hack CFMachPortCreateWithPort = 0x18fe90, fPowerNotifyPort = 0x19d5a0

  DVFreeThread - hack CFMachPortCreateWithPort = 0x1a96b0, fPowerNotifyPort = 0x18c5e0

  DVFreeThread - hack CFMachPortCreateWithPort = 0x19d0a0, fPowerNotifyPort = 0x19d5a0

  Invalid profile specified 'Application does not support the current profile.

  If I'm testing another file of donkey, I get this error:

  DVFreeThread - hack CFMachPortCreateWithPort = 0x32a460, fPowerNotifyPort = 0x319fc0

  DVFreeThread - hack CFMachPortCreateWithPort = 0x1454b0, fPowerNotifyPort = 0x12c400

  Unable to load the content because there was a problem loading the extension: error: request extension com.wolfknock.idialog is not supported for MacOS - x 86.

  two files of ane was supported on the cs5.5 version. cs6 then shouldn't besser 5.5?

  I use the air3.2 lion and mac default rendering...

  Maybe it's because the new ios sdk 5.1 option (check box)?

  If you prepare yourself the DONKEY, you can create an interface for this platform just so that you do not get errors. You can even make the implementation of work if you want. But yes, every time you see:

  "[something] extension is not supported on [program]"

  That is to say that the DONKEY did not alternative code for the platform on which it is run. In your case, the Simulator.
  

• 5.1 E30931 POS could not launch a backup

  Hello

  I have a problem with backups of POS.

  Yesterday, I rebooted my server ESXi and my SAN. We use Dell PowerEdge R805 2 x for the hosts and a Dell PowerVault MD3000i SAN.

  Because we are changing to a PowerVault MD3600i, I unplugged some cables iSCSI (while the server was closed). Now, each host is connected with 1 single cable iSCSI SAN.

  After launching the servers, everything worked very well, wait for backups of POS.

  POS displays the following error message:

  E30931 could not start a backup or restore of a virtual machine because no proxy has been found to maintain the virtual machine

  Unfortunately I have not found something about this error, so I hope someone here can help me!

  My understanding of the error >

  POS has 8 proxy backup internally, making the backup. Unfortunately, the poxies are not initialized in your case.

  Have you tried to reboot the device?

• V8: Adding the extension to a data request created via the API

  Infra Enterprise version: 8.0.34.0

  Version of database: Oracle 9i 9.2.0.6.0

  I create a web application that registers a specific request through the RequestCreate API function. Unfortunately it doesn't seem to be any support to add data to the extension fields created from application designer. I thought to add data manually by using an insert statement. Is the Ref table su_extension_data field an auto-increment field or do I need get the max (ref), add 1, use either the ref to new records? It seems that, based on the infra_queries.sql file, I provide the ref for the extension data.

  All this seems to be a recipe for disaster. Is there a better way to add extension information to a request?

  Thank you

  All references are managed by the SU_NUMBER_ALLOC table. The NUMBER_ALLOC column is the next value to be used for the table defined in the column TABLE_ALLOC. If the value should be incremented or as kentyrr suggested to use the procedure stored in the ALLOCATEUNIQUEREF.

  You need to expand the stored procedure / SQL custom that will insert the extension using ALLOCATEUNIQUEREF fields and call using the function API ExecuteQuery. If you insert multiple extension fields, you can use the nQuantity parameter in order to book a bunch of refs for your instructions insert only once.

• Quotazione di garazia [CF] extension request

  Few need di quotare extension di co by server DELL PowerEdge r.620 of the United Nations

  S/N 7RYJ9X1

  Fatemi sapere is avete di altre information need

  Saluti

  EC Consulting Srl

  Buongiorno, the sto contattando by mail.

• Guarantee extension request by PowerEdge T610

  Buongiorno,

  con the sound system presents a take UN preventivo by the di UN PowerEdge T610 della co extension.

  Codice client IT2721546

  Price made it 16/05/12

  Buongionro, sto contattando by mail.

• How to request a new software added to the software suggested for the unknown file extension?

  Hello

  When a file is opened on Windows with an unknown extension, there is an option to 'search the Web '.

  This option opens the Microsoft Web site with a list of software that can help you work with this new file format.

  We have developed a very good video converter that can be associated to several file extensions in Windows.

  Do you know how and which Microsoft, I must ask our software to add to the list of extensions on the Microsoft Web site?

  For example, the list for the MP4 extension can be seen here:

  http://shell.Windows.com/fileassoc/0409/XML/redir.asp?ext=MP4

  You can see that there are several software listed there. How an application can be made to add our software in the list?

  Thank you.

  Hello

  Thanks for posting the query on Microsoft Community.

  This problem may be the best answer by MSDN Forum. Then I suggest you post in the MSDN forum.

  https://social.msdn.Microsoft.com/forums/en-us/home

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• "ERROR importing user (#) with extension = #: the requested operation would result in a violation of license."

  When you try to import new users to the voicemail system we now get this error.

  At the same time, we had to remove a user, and then it started. Here is the license report

  License unit Distribution feature phone

  License server	Units permitted	Units used	Remaining units	Units pending
  10.7.1.130	1100	440	660	0
  Total number of units for the function	1100	440	660	0

  Licenses for the CCMS node function

  License server	Units permitted	Units used	Remaining units
  10.7.1.130	2	2	0
  Total number of units for the function	2	2	0

  Version of software license

  License server	SW version
  10.7.1.130	7.0

  We have many units of license on the left...

  BTW # is just a placemarker for the user name and extension, the error includes the correct information.

  Any ideas?

  Thank you!

  Those who resemble licenses CUCM (phone), no e-mail voice licenses.

  Assuming you are using the connection of the unit as the voicemail, check on this server. Connection of the unit uses separate licenses for CUCM.

  Barry