New seagate drive hard 6To and powervault md3600i

Similar Questions

• 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373

  Does anyone know the significance of the errors 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373 that occur when you run Apple Hardware Test (AHT)?

  I guess it has to do with the hard drive by noticing the "HARD drive" code. IMac 27 "mid 2011 EMC 2429 3.1 GHz Intel I5

  Thanks for the reply.

  These error messages indicate cooling fans have a problem.  It is a hardware problem which is best treated in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• Try get job PowerConnect 8132 + PowerConnect 8024-k (Switch Blade) and PowerVault md3600i on 9000 MTU

  Try get job PowerConnect 8132 + PowerConnect 8024-k (Switch Blade) and PowerVault md3600i on 9000 MTU

  Everywhere I put 9000 MTU (Jumbo frames)

  My systems host is 2 x M520 with Broadcom 10 G (2 ports) mezz card

  On the 10G card that I am trying to get link iSCSI work with storage, but the work than the MTU 1500

  The M520 installed Linux CentOS 6.4 (where I've implemented the 9000 MTU)

  My scheme is:

  

  Please help :)

  Hello, Daniel.

  Problem solved. It's strange, but all devices have started working after restart 8132 switches. :)

  Thank you for your help.

  Good bye.

• New WD drive HARD black not recognized?

  Hello, I just bought a Western Digital Black 750 GB SATAIII. I wanted to clone my Samsung 500 GB SATA so I downloaded Acronis Clone WD edition... When I installed the new HD in the Bay and the old via USB as recommended I turned on my laptop and got a BIOS message "Please install an OS. I have the boot USB HDD the first value order. I think that because windows 8 is installed on that it would start, but no. I reversed the locations (new via the USB port and old Bay) this time window is not still 'see' my other. I opened the Manager devices to display devices. A new figure, but when I right click Properties it currently says "this hardware device is not connected" code 45? ""Connect the device back to fix the problem. So I did and still get message. It is correctly connected and the USB Universal IDE or SATA cables are nine (cables to go). The strange thing is that I have an old IDE 80 GB laying around so I plugged it in via USB and it has been detected, and I was able to open it! I'm so confused and running on the hair. I contact WD and HP (MOBO manufacturer) also INSYDE BIOS manufacturer.  No response yet, so I hope that someone here has solutions. I tried to update the driver for the new HARD drive, but windows says that it is up-to-date.

  Windows worm 6.2.9200, HP Pavilion g6 - 2231 w/AMD 8A - 6 4400 M APU, 8 GB memory DDR3, INSYDE worm. F.26 BIOS.

  Thank you all for the reply. I was contacted by Western Digital, which had me send a screenshot of my disk manager and the error of Acronis. They noticed that my drive was listed as "not initialized" in the screenshot of Acronis. I'm gone Disk Manager, initialized the disc and voila. I can access now.

• HP Pavilion DV6-3041TX drive HARD failure and possible design Intel series 6 Chipset problem

  Hey guys

  I saw corruption serious hdd on my system for some time now and was just move to replace the drive hard when I came across the problem of design of Intel® chipsets. Now, I think that my system is the range of serial number for this question and as the current drive does not start, I can't check the Device Manager to see if the chipset is one of those affected.

  Is there anyway for me to check this from a USB bootable or something similar, because I don't want to have to go through the effort to replace the hard drive and reinstall windows just to find the chipset is wrong?

  Thank you

  (Now, this is my first post on the forum if I appoilgise if I've got this in the wrong place)

  Open the door of the memory on the bottom of the laptop and look under the memory for a number of motherboard.

  You should have the Intel HM55 chipset, but we can be sure that if we know the motherboard part number.

  You should have one of these two tips:

  630281 001
  615281 001

• How to download again my CS6 on my mac computer, after that my failed drive hard mac and now I have repaired by placing a new hard drive?

  I bought Adobe CS 6 Adobe online in 2011/2012. My hard drive on my mac failed. do not have backup. Now I changed the hard drive on my mac, then I logged on my adobe account, impossible to find the link to download my purchased product

  I would like to re - download my CS6 on my mac that was set after it failed. But could not find the download link on my adobe account. And I'm not interested in creative cloud membership.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.1.1 . 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 |8 mac | 7 mac

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    
    

    [moved from Creative cloud download & install download, installation, commissioning]
    

  • How to install windows 7 on a MB msi (new) for drive hard ide seagate (new)?

    I get failed to install on this disk, can't find drivers, but when I try to install the drivers from the disc that came with the card mother win 7 will not install driver.  Help!

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • drive hard beep and does not

    I have a laptop E1 571 and have been using it with win 10 since its release, had minor problems, but the day of Christmas (from everyday) my hard drive started to make beep sounds and load, only to start menu screen but the hd does not!

    Photo of the scene, taking pictures of the fam on Christmas day and need to load them onto my laptop so I continue to put my mem stick in laptop, copy photos anywhere on disk, but by the time finished my laptop decided to crash. I rebooted it without any problem, but the laptop moved it crashed again and did not the acer logo screen, before you tell me, I have a pxe - e61 media test failure blah blah blah (this is after I have F2ed the hell out of it and changed to the legacy bios.)

    I tried to see if the hard drive would work on my pc, but it made the same beep and does not appear in 'my computer '.

    Do I need a new hard drive or I can solve this problem by using backup/restore discs? I will need to buy or download Acer?

    a HARD beep disc is a symptom of death.

    You can only buy a new HARD drive.

  • Drive hard 303 and 305 errors

    Hello. My HP Pavilion dv6-6095ex started using so slow to the extent that I could open any file; Therefore, I did hard automatic test of disk errors then got 303 and 305, so I searched for this topic and read a few reviews stating replace HARD drive is a must to solve the problem. Also, it was mentioned I need to check the number of spare part (that's what I found: 634250-001). BTW, I coludn can't found my model here ( & Maintenance Guide.).

    These are the questions I hope to receive an answer, please:

    1. is there a HIGH possibility from facing the same problem in the near future, because I'm afraid to buy new HARD drive would be a waste?

    2 - What are the best choices for a new HARD drive?

    If you have any positive information I'm all ears and eyes ():

    I would be very grateful for any help.

    Hello

    (1) No, the final solution only for the failed hard drive is replaced by a new brand of good quality one. Errors are conclusive for the replacement of hard disk.
    But performance issues, you were previously dependent on who was in the car you use - physical spinning total use of the RAM, processor, hard disk of GOLD Chipset resembling the State (SSD) solid, useless & programs software removal etc.

    Your system supports (160GB SATA) SSD who boosts performance significantly if the size limit is limited. Your system preinstalled 6 GB of RAM which gives pretty decent results. The processor is also good but not later that yours is 2nd generation Intel processor (the last is 4th gen).
    So I think that replace HARD drive should minimize the performance issue.

    Read on: http://support.hp.com/us-en/document/c01817290

    It's your choice, you want an SSD performance but low by storing normal physical spinning of data (GOLD) HARD drive for large storage capacity & decent speed.

    Your system came pre-installed with 750 GB 5400 RPM HARD drive.

    According to the Service Manual of your product, I have given above, see Page 6 & 7, the system supports up to 1 TB 5400 RPM, SATA, 12.7 mm thick, form factor: 2.5 ".
    It supports also 750 GB 7200 RPM but 9.5 mm thick, form factor: 2.5 ".
    If you can replace with or any of the foregoing.

    You can refer to Page 31 for more details.

    Supported SATA type is SATA 2 i.e., 3Gbps, but SATA 3, 6 GB/s hard drives also go with your system, they are backward compatible.

    Here are a few:

    http://www.Amazon.com/GP/AW/d/B004I9J5OG?cache=a4e0ff0663754d446ad8a00c7b765e18&PI=SL500_SS115#ref=pd_aw_sbs_3

    http://www.Amazon.com/GP/AW/d/B00DUG88OQ?pc_redir=1405203403&robot_redir=1

    1 TB 2.5 5400 "12.7 mm INTERNAL laptop mobile HARD drive

    160 GB SOLID STATE DRIVE

    Hope this addresses your concerns,

    Thank you

    PLEASE CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

    CLICK ON BRAVO IF YOU LIKE MY ANSWER *.

  • Try turning off hard/reactivate the new disk drive hard breaks down

    I have a computer with a failed hard drive and tries to disable my Acrobat Pro XI. We tried to turn off and try to go on a new hard drive and are not able to transfer through. What can I do to fix this? Thank you

    to turn off (make sure you have your serial number), open the default Acrobat > click Help > deactivate.

    on the new hd install acrobat and activate with your serial number.

    Available downloadable Setup files:

    • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
    • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
    • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
    • Contribute: CS5 | CS4, CS3 | 3,2
    • FrameMaker: 12, 11, 10, 9, 8, 7.2
    • Lightroom: 6| 5.7.1| 5 | 4 | 3
    • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
    • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Impossible to find connect them drive HARD Light and Power light after the change of office case - I got my answer

    I changed my case for reason of cooling, and I can't do the power light and the light work of HARD drive on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a H-RS880-Μatx (Aloe)
    Manufacturer: Foxconn. I found a few spec but not enough details on connector J18.

    The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED.

    Any help appreciated.

    Thank you.

    CeD_B wrote: I changed my case for reason of cooling and I can't do the power light and the drive light HARD works on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a manufacturer of H-RS880-Μatx (Aloe): Foxconn. I found a few spec but not enough details on connector J18.

    The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED. Any help appreciated.

    Hello CeD_B, I'm not familiar with your card connectors mother special façade, however if cables (wires) are inserted in a plastic connector, you may remove the wires and connect them individually. They are usually labeled.

    The son of LEDs for the power switch and the hard disk activity are polorized, which means they have a plus and a downside that should be connected to the pins on the motherboard in the correct polarity.

    If you have connected to power led and HDD led pins on the motherboard and the lights are not just back the sons and the led should light up, and the hard drive activity led should light up when the hard disk is written to or retrieved from the hard drive data.

    While this image is not your motherboard, it will offer an idea of connections pin on some motherboards.

    Search in the second post of this thread.

  • Re: Tecra S5-15 q: drive HARD password and motherboard dead

    Hello

    I have trouble BBBIIIG. A few days ago my s5 tecrca tells me "PCI Express error" and displays horizontal bands. Now, I can not do anythink with this computer (warranty void). Ok.

    I have 2 computers one another and when I try use with Toshiba hard drive.
    He tells me that the disc hard password is incorrect, but I use it for 3 years per day and never change!
    Technical support in Poland is on the ground level. What is with this drive?

    What can I do to use my password with MY HARD drive.

    Help, please.

    (Sorry my English is not good)

    Tom

    I searched the pages of Toshiba for some info about the HARD drive password and found this interesting document:
    [What is A HARD DRIVE password? | http://APS2.Toshiba-tro.de/KB0/FAQ9202JG0000R01.htm]

    [Summary of TOSHIBA HARD drive password | http://aps2.toshiba-tro.de/kb0/TSB6B01MC000CR01.htm]

    According to the information contained in the two documents of the disk HARD unknown or forgotten password can be deleted.
    If you are sure that you are using a correct 100% HARD drive password, then it might be possible that you have entered the password incorrectly. It's the only plausible explanation

  • Drive HARD 1 and 2 together or independent on Qosmio?

    What are the advantages and disadvantages on disk 1 & 2 Raid options used together like hard disks or raid option to two independent hard drives?

    Kind regards...

    Hello

    you have 3 possibilities: two normal hard drives, RAID 0, RAID-1

    RAID 0 (Striping): two hard disks are used as a big drive, if a HARD disk fails all data is lost

    RAID-1 (Mirroring): hard drives contain the same data if a disk fails, data is not lost

    Good bye

  • The Web of Toshiba site does not recognize of my drive hard number and P/N

    Hello

    There is a little less than two months, I bought my HDD Toshiba Canvio Basics 3.0 from Amazon. The hard drive has stopped working for some reason any (I drop or something, it simply stopped working).

    Of course, I was trying to use my warranty to repair or Exchange it, but the Web of Toshiba site does not recognize my serial number and product number. They are just there, black and white on the sticker on the back of my hard drive, but the site says they are not valid.

    Someone has an idea what is happening? I would rather not throw 50 euros by the window for less than two months of use.

    Product number is HDTB105XK3AA - and not to HDTB105 * E * K3AA like some sites say (including Amazon).

    Thanks for your help.

    Stand by. Have you contacted Amazon using Amazon options for repair under warranty or Exchange?

    Check please help Amazon option and collect detailed information on defective, damaged or significantly different returns.

    Two years ago I had problem with the mobile phone bought by Amazon and I send direct Amazon with bill Amazon.

    By the way: can you please post the link where you have tried to check the serial number of your HARD drive?

  • Remove the drive hard ubuntu and replace them with windows 7 from DVD

    In the process of reinstalling windows on a laptop that had top ubuntu, I followed the instructions as "where do you want to install windows." The computer gives me disk 0 Partition 1 512 MB 507 MB free space / system, disk 0 Partition 2 589 GB MB 0.0 MB primary free space, Disk 0 Partition 3 5.9 / 0.0 MB GB free space / primary. In order to reinstall my Windows 7 (which was a computer someone borrowed from me and he came back with ubuntu which I want to replace) delete all partitions of three. If so, this will not affect my computer?

    Thank you

    Yes, you must delete all partitions. Ubuntu Linux create multiple partitions during installation which includes a Swap, system partitions.

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the disc/s click on Delete

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation