Request to another DNS server if the connection fails with the current

Similar Questions

• Error in the configuration of DNS server via the netsh command

  When I configure a local DNS server for my test-domain with the netsh command
  netsh interface ip set dns name = "LAN connection" source = static addr = 192.168.1.105
  I get a messge for error (translated from German):
  The DNS server is wrong or does not exist.

  But the local configuration of the DNS server always works perfect afterwards.
  The question now is: what netsh like not on my DNS server to produce this error?

  I get the same message too and the command works perfectly every time. It's probably a timing issue. I would ignore it.

• Cannot open a Web site on the PCs of users, but the CD/DNS server in the same subnet to open it

  I'm trying to access a website of all pc sales and got an "Internet Explorer cannot display the webpage" error, but when I try it on a domain controller that is also a DNS server in the same subnet, I am able to access.  PC client when I ping the site I want access to I got "Request timed out" but not on the CD/DNS server.  Can someone please?

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I hope this helps.

• Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

  Hello

  I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
  "There could be a problem with one or more network adapters on this computer." Help, please!
  Thank you!

  Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.

• DNS server for the WRT54GS v6 problem

  This router running for 2 years without any problem (even on Windows7 since las year), recently it wont let me conect to the internet, network and say sharing that the configuration of the computer center are good but no response from the DNS server is present.

  (Windows 7 RTM Ultimate x 86, Bellsouth / AT & T ISP in Florida.) Conexion ADSL, nine cables ethernet and material held in the best conditions, the network card: Realtek RTL8102E/RTL8103 Family PCI - E Fast Ethernet NIC (NDIS 6.20) (v7.2)

  ================================================================================

  What I tried:

  Reset the router or modem (connected to a Westell 6100), in order to define the default settings and (based on the Web reset and reset buttons)

  Flushing IP in CMD

  Make the web based configuration for my WRT54GS v6, releasing DCHP, renewing, defaults, etc...

  Upgrade the firmware to v1.52.7 (latest) nothing helps, dating back to 1.52.6 original.

  Shows Device Manager hardware works correctly.

  Windows 7 show me a link to view the properties of my WRT54GS when I right click on it, I also see the "Enable" option, but every time I use it I get "Connection Failed!"

  ===========================================================================================

  I'm not much of a tech guy, and read the forum does not help me a lot, so I ask for help please.

  PS: CD installed by default for her with her old EasyLink Advisor without success, tried also the last 2 Lela EasyLink Advisor, nothing helps.

  In addition, there is no default gateway glancing an IPCONFIG in CMD and now there is (192.168.1.1), which I use to enter its web-based configuration.

  That your ISP is a DSL provider, most of the DSL Modem has a DHCP server on them, so they act as a router. From now you the type of connection is NAT behind NAT.

  Order for your Linksys router to work with a DSL Modem. Connect to the Linksys router and on the Configuration tab configuration page, you must modify the "local IP address" to 192.168.2.1 and click on save settings...

  Once the settings are saved, unplug the power to the router and Modem, wait 30 seconds and then plug in the power to the Modem, and once all the lights are cover then you can connect the power supply to the router and check if you are online.

• How to detect the DNS server using the device is

  Hello

  What is the means of detecting the device of a BB of DNS server uses at present, whether on wifi, plan data (cellular network), connected to a BES Server?

  Thank you

  You can probably use Network Status BPS:
  https://developer.BlackBerry.com/native/reference/core/com.QNX.doc.bps.lib_ref/topic/manual/netstatu...

• EZVPN connection fails with the error "Split tunnel higher than max attributes...."

  Hello

  We have ASA 5520 acting as the VPN server and the router Cisco 1941 as EZVPN client. These last days of customer is not able to establish the vpn connection. 1941 continuous router generates the below the log messages

  ---------------

  001569: Jul 22 ABC 12:19:05.883: CRYPTO-4-EZVPN_SA_LIMIT %: EZVPN (VPNGROUP) Split tunnel attributes (51) greater than max allowed split attributes (50)

  001574: Jul 22 ABC 12:19:07.835: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = vpn_user group = VPNGROUP Client_public_addr = Server_public_addr =

  004943: Jul 22 ABC 11:32:42.247: % IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the table fragment has reached its maximum 16

  ---------------

  Future prospects for aid and the suggestion of experts

  Thank you

  Israr Ahmad

  Yes, your split tunnel access-list is too big, and he has reached the maximum number of lines.

  Try to reduce the number of ACL for your tunnel of split ACL maybe combining the subnets if possible.

• connection fails with an error via the Proxy OUD

  Have hit a problem with the Proxy of the OUD. If the recorder file or admin-based access is turned on, the link fails with an error

  Below error

  The result Code simple bind attempt failed: 80 (other) additional information: Worker Thread 44 has encountered an exception uncaught during the processing of operation BindOperation (connID = 97, opID = 0, Protocol = "LDAP 3, dn = cn = oudadmin, authType = Simple"): NullPointer

  Hello

  I think that the conditons of occurrence are more complex than just enabling newspapers, but this looks like a bug.

  Please contact the Oracle Support so that a default is created.

  -Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• JavaScript: SOAP.connect () fail with NotAllowedError

  I try to call the javascript method SOAP.connect () of a self created the menu added by app.addMenuItem (). If I call SOAP.connect () in the AppInitialisationContext, it works perfectly, but calling it 'cExec' will fail with NotAllowedError: Sicherheitseinstellungen verhindern den Zugriff auf sharp characteristic oder method. (refusal of the call of function or property security permissions).

  Surrounding the SOAP.connect () with an app.trustedFunction (to get a context of trust) will fail with the same error message.

  The PDF I have loaded in Adobe Reader 9 (free edition!) is granted with rights of forms, the indicator required of F (the API reference) should not be the problem.

  The Javascript is located in the user home (and app dir of drive); both shows the problems mentioned above.

  Is this a problem with the free version of the reader or a (solvable) permissions problem?

  Thanks in advance
  Hendrik

  What LiveCycle Reader Extensions Server can grant rights to the form ("F").  The activation of the reader in Acrobat will give you only save rights ("S"), it cannot grant rights to form.

• custom Advanced - URL JDBC connection fails with some valid JDBC URL

  Hello
  
  I am trying to create a connection with a custom JDBC and SQL connection string * Developer launches the error message:

  Status : Failure -Test failed: Required property 'hostname' is not set on the DatabaseProvider

  my tests are:
  < li > with a connection through the Connection Type that is set on AMT and a aliases correct - it works fine
  < li > a connection via the Connection Type set to Advanced and exactly the same values of tns in the url:

  jdbc:oracle:thin:@(DESCRIPTION=(enable=broken)(ADDRESS=(PROTOCOL=tcp)(HOST=172.24.32.113)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=RESTSVP_SITE1)))

  -It does not reach

  Status : Failure -Test failed: Required property 'hostname' is not set on the DatabaseProvider

  < li > with JDBC URL defined on

  jdbc:oracle:thin:@172.24.32.113:1521/RESTSVP_SITE1

  -It works fine
  
  As my url jdbc is close enough to the example in [url http://docs.oracle.com/cd/E11882_01/java.112/e16548/apxtblsh.htm#CHDBBDDA] using JDBC with firewall maybe someone can help me to fix it?
  
  Martin
  
  Published by: berx on October 12, 2012 11:32 - corrected typos

  Hi Martin,

  Bug connected:
  Bug 14761950 - THIN ADVANCED URL FAILS WITH OIC CHECKBOX ON
  Reproduced internally.
  (OIC - copied ojdbc6.jar OIC 32 bit 11.2.0.3 instant client (version of windows7 win32bit running on win64) set path and set the check box)

  The following will fail with OCI box set:
  JDBC:Oracle:Thin:@(Description=(Enable=Broken)(Address=(Protocol=TCP)(Host=_host_name_)(port=1521))(CONNECT_DATA=(service_name=_service_name_)))

  11.2 destination database, without SSL, no CARS, no LDAP

  error message: required property "hostname" is not set in the provider database.
  replacement of fine with OIC works very well. (if OIC checkbox is on or not).

  -Turloch
  Team SQLDeveloper

• Discoverer of office connections fails with invalid user/Pass name in r12

  Hi all;
  
  I have the problem. I can connect Discoverer Administrator to my localmachine, and I do not see what ppl it's there... But when I try it gives me connection Discoverer Desktop to my localmachine name of user/Pass not valid. error.
  
  I can not connect my system browser:
  
  http://xx.com:7778/discoverer/more < < pages comes and I filled in the blanks as district:
  Connect to: Oracle Application
  Username: sysadmin
  Pass: *.
  Data Base: SCREWS
  
  I found a document of forums. Which is:
  
  Discoverer is unable to connect to the Oracle Applications database: name of user and password invalid Doc ID: Note: 467919.1
  Discoverer 10 g (10.1.2) connect to Oracle E-Business Suite 12 fails with "Invalid Username/Password" Doc ID: Note: 443661.1
  
  But before I apply the patch I want to take advice from you. Coz I can connect Discoverer Administrator and can use it but cant login Discoverer Desktop... kind of weird... I already checked it that I made in the installtion and its all seems correct.
  
  Any idea;
  
  Concerning
  HELIOS

  If you have verified that all the steps, and all are OK, then please proceed and apply the patch. Make sure that you apply the appropriate fix (note: 467919.1) that corresponds to your version of discoverer.

• Firefox does not connect to the internet on this computer, if it does on another computer and Internet Explorer connects also with no obvious problems.

  About 1 year ago, I helped set up Firefox on my mother's computer. It worked fine until a couple of days. Now, he is more connected to the internet. The system is Windows XP, service pack 3. Internet Exporer connects to the Internet on this computer. Also, I have another computer with Firefox and it works without problem, wireless. We tried to remove Firefox and then reload and which did not help. We receive no error message. Internet and Firefox simply do not seem to see each other.

  Sounds like a firewall issue, seems to affect
  More than the other browsers, Firefox.

  • Firewalls - MozillaZine Knowledge Base

    http://KB.mozillazine.org/firewalls

• How to "go to a page in another document" without close the currently open document?

  I created a form that uses a button to switch to another pdf document. This second document is included in the first document as an attachment so that the whole package can be sent to people in a single document.

  It works well but the problem is that when the button is selected the document that is already open is closed (albeit with a backup invites document).

  There seems to be no way to keep the existing document open, while the second document (the linked document) is open.

  Is there a solution to this?

  Go to the properties of the button and change the action "go to a page view".

  you have created. The option "open in" Edit and put to 'new window '.

• HTTPS connection fails with "MOZILLA_PKIX_ERROR_REQUIRED_TLS_FEATURE_MISSING".

  Try to connect to samba.org and its subsequent subdomains using Firefox 50.0.2(x86) returns an error that I'm unable to find a cure for.

  This rare error message seems to mean there is a problem with the response from the OCSP server: OCSP "stapling" - inclusion of the non-revocation of the server certificate verification - is necessary but not supplied.

  When I load https://wiki.samba.org/index.php/Main_Page directly, I get an error.

  You use a proxy? There was a reference on another site for a problem using Zscaler on this site: https://access.redhat.com/discussions/2408091 (June 30, 2016).

  Does make a difference if you turn on this setting:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste ocsp and make a pause so that the list is filtered

  (3) double-click the preference security.ssl.enable_ocsp_must_staple to switch the value from true to false

  Then, try the site again, bypassing the cache (for example, Ctrl + Shift + r when you reload). Any difference?

• VMware view connection failed with status 502 code

  2014 01-20 T 12: 14:40.545 - 03:00 INFO (1248-128 C) < 4748 > [MessageFrameWork] program "wswc - VMware View Client" started, version = 5.4.0 build-1219906, pid = 0 x 1248, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 01-20 T 12: 14:40.576 - 03:00 (1248-1080) INFO < logloaded > [MessageFrameWork] Plugin "wswc_command - VMware View Manager of server connection commands" load, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248-0F68) < logloaded > [MessageFrameWork] 'wswc_http - VMware View Client HTTP Handler' Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248 - 16 B 4) < logloaded > [MessageFrameWork] 'wswc_pcoip - VMware View Client PCoIP Interaction Handler' Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248 - 16 B 8) < logloaded > [MessageFrameWork] "wswc_rdp - VMware View RDP Manager" Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-16BC) < logloaded > [MessageFrameWork] "wswc_tunnel - Secure Tunnel of VMware View Client" Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-1698) INFO < logloaded > [MessageFrameWork] 'wswc_rsa - VMware View Manager RSA' Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-062 C) < logloaded > [MessageFrameWork] Plugin "wswc_ui - Manager of user interface of the VMware View Client", version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-07F8) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248 - B 17, 0) < logloaded > [MessageFrameWork] Plugin 'ws_winauth - support for VMware View infrastructure Windows Authentication' support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option 'ServerURL' set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option "Domain_name" set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option "DesktopLayout" set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Windows Client started

  2014 01-20 T 12: 14:42.919 - 03:00 (1248-1024) < MessageFrameWorkDispatch > [wswc_command] year HTTP error error: status code = 502.

  Use the instructions in this KB: KB VMware: VMware View Client configuration to work around the Internet Explorer proxy settings