Requests indicates Vista Service Pack 2 installed, install Windows Vista Service Pack 2 (KB948465) new

Similar Questions

• Install windows on old laptop Got 8 new replacement battery-sector not work problem

  Hi all!

  I have an old laptop Vaio VGN-SR130E. A few months back, I installed windows 8 on it. Microsoft compatibility check approved. Everything was working fine until yesterday, I installed a new spare battery (former it was is unloaded in minutes).
  That is to say "57% (plugged not supported).
  I don't have on this laptop Vaio Control Center and all other services Vaio reason clean installation of windows 8. So I can't say it's the origin of problems battery care function. Already tried to shut down the computer laptop and now the power button / stop after removing the battery. Did not work.
  Can not turn on the laptop without the AC adapter / CC, but after that windows is on I can remove the adapter and system works very well.
  Any help would be appreciated.
  Thanx.

  Thank you, Mr. Ganesh

  I tried to install the software from the disc without success. So I contacted the seller, and they were sent to me by e-mail. Now, I installed it, it was an update for the bios and the battery works perfectly fine now. Thank you very much for your help.

  Concerning

  Abrar Ahmad

• Re: How to install Windows from a recovery on a new hard disk media?

  Immediately after a Windows Update, my computer will not re-start. It says disk error.

  I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now, when I put in the recovery media to install Windows on the new drive, it gives an error message.

  What this may be? Would I be able to install Windows from the recovery media?
  It is Windows 7 and laptop Satellite A500, 64 bit.

  Hello

  In General, you can install Recovery on each compatible HARD drive image so you should not be a problem in this regard.

  Please tell us what happens when you start installation of recovery. What error message?

  New HARD drive is recognized in the BIOS. Before you begin installation of recovery BIOS default value.

• Qosmio F10 - cannot install Windows XP Home edition with the new HARD drive

  My F10 won't boot from a hard drive and because of its obvious from the hard drive, it is definitely broken. I changed the build in Toshiba 80 GB HDD for a Toshiba hard drive with 60 GB.

  I put an Installation of Windows XP disc in the drive and press C at the start to boot from the CD. It does not start the installation, but on the contrary, he says that I have to remove the hard drive.

  Why? Is this only possible ti disc editing hard identical because there is not bios?

  HELP PLZ!

  Hello

  Your new HARD drive is recognized correctly in the BIOS?
  Check it!

  Plus when you get exactly the message installing Windows and which will be displayed exactly?

  Can try you with Toshiba Recovery disk, please?

• Install Windows 7 x 64 on a new Dell Inspiron N5110 with NoOS

  Hello! I recently bought a new Dell Inspiron N5110 with NoOS. Now, I am trying to install Windows 7 Professional x 64 on it from a USB. I made this a hundred times, but now I'm stuck with a problem. After the beginning of the installation it shows me a message:

  A required CD/DVD device driver is missing. I f you have a driver disk, CD/DVD or player of the USN, please insert it now.

  I tried to google for answers to this problem, the only thing I found is that the laptop does not all SATA drivers installed and asks me to install some. However, I can't figure out how to do this. The system doesn't see another Flash DRIVE with drivers on this subject and if I copy the drivers to the root of the USB which I am startup also fails to find the drivers.
  How can I solve my problem? Any help is appreciated. Thank you!

  I fix this plug in USB2.0 flash boot, when the plugin USB3.0 discovers same error message.

• How long an installion take to install Windows 7 Home Premium on a new hard drive in minutes, hours. ?

  Its seems its time consuming to install Windows 7 Home Premium

  It varies depending on factors such as the speed of the processor, memory, and even the speed of the hard drive. I've seen facilities vary from 14 minutes, 20 minutes to an hour to several hours, but is upgrade scenarios. Because you perform a custom installation, would be no more than 20 to 30 minutes. If you experience problems during installation, try unplugging all non-essential devices (printers, disk external drive, thumb drive, scanner), the installer of Windows 7 could try to detect them.

• When I try and install windows 7 64 bit on my new custom pc I get this 0xc0000225 error what should I do?

  I just built this system: processor intel i5 quad core 3.4ghz

  8 GB corsair memory
  EVGA gtx superclocked 660
  250 GB seagate hard drive
  Gigabyte d3h - z77
                                  
  When I tried to install windows 7 64 bit, everything was fine unitil randomly, it stopped and gave error 0xc0000225. I really need help I spent a lot of money on this system and it does not work please help!

  Try to reduce the amount of RAM installed on a unique key or 2 GB and try to install the new.

  Also:

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Cannot install Windows 8.1 on my brand new HP laptop 2000-2d03SH (lack of storage driver)

  Hi all

  I just bought a new laptop from HP 2000-2d03SH with FreeDOS, but I bought a Windows 8.1 separatelly.

  Unfortunalety I can't install it on my new shiny HP notebook. (

  When I start Setup it is said that he can not find a suitable driver. It is sad that the pilot missing for some kind of storage device, but it is not to say every time.

  I downloaded all the drivers available on the HP site, but they are all .exe file so I can't use them.

  What should I do?
  Which driver should I unzip and try to use?

  Y at - it a driver pack appropriate I have to download and use for installation?

  Why it can't download the installer from the internet? (he connected with wire)

  Help, please! Currently, I can't use my new notebook at all! (

  Finally, I managed to install Win8.1 on the laptop. Not for freeOS so the problem still exists, but I installed Win7 first and I was able to install Win8.1 of Windows and not not not like booting from DVD...

• Slimline Office 260-a020: install Windows 7 Home Premium on a new machine Windows 10?

  Just got a new HP 260 - A020, but I used Windows 10 library for 3 weeks in the meantime and have no use for the clumsy, stupid thing, overworked or otherwise for his reputation as a Big Brother. (also software security 3 deep at the top of the paranoia of pull-the-plug, had a hint of malware, so Win7 is a lot never secure enough for a few years).
  ... The old hard drive is always good, so I intend to drop that in an external case to recover files from 2-3, that have not been backed up, which first use as a boot drive, then for the time being that the backup with Windows7 on the machine itself.

  ... EXCEPT - warnings of Best Buy Sales & Geek Squad, as well as messages here on how a 'modern' machine may not recognize the old drivers - LaserJet not only but things such as video, network, disk HARD, USB etc.
  ... But in the months before July 29, I've seen a hundred proposals to put 7 or 10 on a disk/partition bootable by means of hedging against the transition and never a mention of this problem. If a native Win7 machine works very well with Win10 and new drivers but not the reverse?  or download Win10 preserve the old drivers?

  Hello:

  There are too many unknowns to give you an answer about your plans.

  I looked at the specs for this PC and I do not see why he cannot run W7 if you have a W7 64-bit installation disc and product key.

  You will need to enable legacy in BIOS mode and disable secure startup to launch W7.

  Looks like you can get all the drivers you need directly from websites of the manufacturer of the item (AMD and Realtek) and the driver for the card from another PC of HP wireless.

  The unknowns about what you want to do...

  Most likely simply plopping the other PC in the new disc it will not work.  Startup files are different, etc..

  Then there are potential legal problems...

  If the hard disk that you plan to install in the new PC has an OEM operating system, it is forbidden to transfer the OEM of the computer operating system, it was originally installed in, to another PC.

  An OEM operating system is the one that came with a PC when you bought it (like Dell, HP, Gateway, etc.).

  Only, you would be able to transfer an operating system of detail from one PC to another.

  In summary: this PC yourself running W7?  Probably, Yes.

  Can you put the hard drive currently with W7 top in your new PC and expect it to work?  Probably not.

• Cannot install Windows XP Home edition on the new HDD in Tecra S3

  Hey,.

  I bought a second hand without HARD drive laptop, so I bought a new Samsung's HARD drive with 120 GB yesterday. I have it rolls in my Tecra laptop and it started. But for some reason, there are problems.

  Already, I have downloaded the driver for the RAID and I took it on a diskette. I also have an external floppy drive, but when it finished installing the driver and Windows Setup should start the computer always says he could not install on this partition because he doesn't? t can be accessed.

  I formatted the HARD drive a few times but nothing helped... I don't have a system recovery disk and I tried already with integrating the driver configuration via nLite.
  But now there is something new. Whenever the installation should start there is a blue screen that tells me I have to reboot the PC and check the virus or take out the HARD drive.

  The biggest problem is the laptop is the Dutch...
  I hope someone can help me, ja? m really desperate!

  Hey,.
  Yesterday, I saw that I was using a hp installation Windows Disk. The HP disk does not work on my Toshiba?

• How re - install windows 7 edition starter on the new hard drive in one aspire a D270 - 1806

  New on this site.

  I have an a D270 Aspire-1806.  I got the matrix of hard drive and no recovery disk was burned.  I replaced hard drive and need to find a clean Windows 7 Starter copy to install. I understand that I may use the same product key to check the impression to be installed.  I don't have a USB optical drive.  Is it possible to install from a USB flash drive? I have a fairly large [16 GB] flash drive (operating system must be the thing about flash player?) I can't seem to find the 7 starter version is...

  I've been at this for a few days now with little result.  Thanks in advance for the direction and help.

  Yet once, looks like a disk i/o error. Here's what I would do if I were in your shoes:

  (1) fix the WD to another computer with a box USB or SATA / USB and format it. Delete completely all the partitions on the disk in this way. Know what drive letter is assigned to it, run "cmd" and type "format D:" (without the quotes and this example assumes he has been attributed to the D drive letter).

  (2) if (1) completed, the installation and try again in the netbook. If this isn't the case, get a replacement drive.

• How to install windows 7 on a MB msi (new) for drive hard ide seagate (new)?

  I get failed to install on this disk, can't find drivers, but when I try to install the drivers from the disc that came with the card mother win 7 will not install driver.  Help!

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Install Windows XP disc required for the new hard drive

  I bought an Inspiron 510 m new Dell laptop some time ago and am trying to install a new hard drive. However, even though I have the license key of Windows XP on the sticker on the laptop, I don't have a Windows XP installation CD - Dell would be please to send me an and let me know who I need to contact my details?

  Thank you very much

  Good news - I just called Dell who have been extremely helpful technical support. They had no problem talking to me and agreed to send me a replacement at a reasonable cost drive, and it seems they still distribute XP discs. Just thought I would post only in case it helps others in the same boat.

• Installed Windows 7 on gateway E4500 PC and now there is no Audio as well as does not recognize do not identify/2nd monitor

  Installed Windows 7, 32-bit on the new hard drive. Gateway PC E4500. Cannot get audio and does not identify/2nd monitor. Already used Windows XP. Works well when the drive with win XP is reinstalled. Is Windows 7 compatible with this PC?

  Original title: WINDOWS 7 installation, 2 numbers

  Hello

  There is a gateway E - 4500D and E-4500 s model.

  Enter the model number on the link:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  E - 4500D has been supported by the gateway and gateway provided drivers for Windows 2000 Pro and XP 32/64, Vista 32/64.

  E-4500 s is supported under XP 32/64 or vista 32/64

  No support or drivers for Windows 7 32 or 64 bit.

  You can try the Audio drivers for Vista; no warranty if.

  See you soon.

• How to install Windows XP Home on my Satellite L500-1ZP?

  I formatted my Satellite L500-1ZP (PSLS9E) and thought DLI install win xp instead of win7 (do not have the disk/partition backup)
  now, when I start it with the cd of windows XP blue screen 'windows setup' inside start but when its finished loading, it gives me an error code:
  ' * STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000).

  I read somewhere that I need to download SATA drivers for my laptop and do a disc to install windows xp with the SATA drivers on it?

  I tried to get these drivers, but I don't know that I have need and how to do the installation disc
  I copy my original windows XP Home cd and put the drivers in a folder somewhere on the disk?

  I hope someone can resolve my problem because the laptop is just over a year, and I don't really want to buy a new...

  I just hope that you created the recovery DVDs until you started to install own OS. After clean operating system installation you not longer have access to data recovery.

  You are right. For the installation of Windows XP Home edition, you need SATA driver. How to install Windows XP Home edition on the new laptop models that you can read on http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

  In the end, I must say that your last sentence is pretty confusing to me. You bought the laptop designed for Win7 and you want to use the old WXP on this. Do you really think you need to buy the new laptop if you want to install Windows XP Home edition?