Required Resoucres for P2V

Similar Questions

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VG202 and the VG204 requires licenses for CME?

  Hello

  VG202 and the VG204 requires licenses for CME?

  Reference number?

  Thank you

  Hello

  You men user license, the registration as EPSC ports? If so, let's say that Yes.

  When one of the FXS ports as SCCP that you use an instance of user, or one of the available ephone register, so if you're wondering if adding to the CMF as SCCP FXS ports, Yes, it will decrese the amount of phones that you have available to the general public.

  On the other hand, if you use the VG20X with h.323 or SIP to the CMF it will not use the ephone instances, so you shouldn't worry about this.

  --
  Jorge Armijo

  Do not forget to rate helpful responses and identify useful or correct answers.

• Preferred solution for P2V (vCenter Converter or VEEAM)

  I am analyzing and is about to convert a list of the physical servers in vmware VMs and I was wondering what is the best solution to use. Use vCenter Converter or VEEAM? I want to know what most people use out there and all the pros and cons with each of them.

  Thanks in advance.

  As far as I know, Veeam does not have any tool for p2v conversion. So, in this case, you'd better stick to VMware vCenter Converter. However, once the physical VMs remaining are converted, you will need something to save them. That's exactly where Veeam can become very useful for you.

  See you soon.

• 'Require SSL for client connections and Administrator display.

  Whence him 'require SSL for client connections and Administrator display' option under Display Configuration > global settings go into View 5.1? I don't see this because I do not have the right license or move it elsewhere?

  According to the documentation of view 5.0 (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.installation.doc/GUID-5706AA18-795A-4575-96EF-98CA3E19228C.html), the option should always be there.

  Thank you!

  In the login server access configuration display: > servers > server connection > edit one of the servers, and you should see the optoins

• Requiring authentication for SMTPS, but not for SMTP

  Hi all
  
  On a cluster hive, beehive.domain.com, we created 2 endpoints for each SMTP and IMAP, a safe and the other normal, like this, users can connect to two ports (25 + 465 and 143 + 993).
  
  Endpoint on the secure ports were created to allow direct access from the outside to redirect the only secure ports (465 (smtp) and 993 (imap) through the firewall to the cluster of the hive.) I don't massively secure and that there is an instance of hive DMZ for this effect, but that is for later.
  
  Question: Is is possible to require authentication to use only secure SMTP port and not the normal? The idea being, inside the LAN users port 25 to send all the emails that Beehive will relay all emails coming from domain.com, authentication is not required it would disrupt some applications that need to send email. However, we want to prevent Mr. spammer to send his stuff from external identity spoofing the this address is @domain.com
  
  Any suggestions? I read in another post that one idea is to create an additional for the SMTP Protocol Secure alone, VMS as it is possible to have the identification required at the level of the virtual machines. who is?
  
  
  
  Kind regards
  
  David

  Hi David,

  fix, create a new VMS recvssl endpoint:

  beectl add_configuration_object - type 'oracle.ocs.management.model.EmailService.SMTPProperties.VMSProperties '.

  CONFIG_OBJECT_ID = da9444a0-2e3e-45e7-b5f2-98945514c6de

  name the component modify_property beectl VMSName - value SmtpSslVMS da9444a0-2e3e-45e7-b5f2-98945514c6de

  append_value - name of the component _EmailService:SMTPProperties VMSPropertiesList value da9444a0-2e3e-45e7-b5f2-98945514c6de beectl

  There was a BUG in 1.4.X beekeeper. So I post you the command line procedure. After that configures "Require AUTH" for this endpoint. This you can configure beekeeper.

  See you soon,.
  Sven

• Location for SYSPREP for P2V?

  Hello

  We install Converter Standalone on a Windows 7 workstation.

  When we go through the Setup Wizard, there is an information saying that the SYSPREP file must be located at a particular place on this workstation with installed stand-alone converter.

  We wonder where the SYSPREP file will be used?   I believe that the SYSPREP must be used when you start the virtual machine and SYSPREP will be parked to vCenter Server.  Or SYSPREP is required for the P2V process?

  Thank you

  Hello

  Please find the location of sysprep.

  • If you have vCenter Server installed on Windows Server 2008 and above, directory_path is%ALLUSERSPROFILE%\VMware\VMware VirtualCenter\Sysprep which usually translates default toC: \ProgramData\VMware\VMware VirtualCenter\Sysprep.

    Note: C:\ProgramData may be a hidden folder.

  • VCenter Server installed on another operating system Windows, directory_path is%ALLUSERSPROFILE%\Application Data\VMware\VMware VirtualCenter\Sysprep\, which translates generally OCD: \Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\Sysprep\by by default.

  The article below gives an idea just to istall sysprep.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005593

• Preparation of an installation of Windows XP Home edition CD with a MINIMUM required drivers for A200-1AX

  Greetings,

  I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.

  My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?

  Thanks in advance for your answer.

  Best regards, Ashraf.

  > My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running

  You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
  This driver is important. Other drivers can be installed after the installation of XP!

  > My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.

  > If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
  Generally, Yes! Without the good BIOS features like the FN buttons could not work properly!

• HP Envy Phoenix 860se-100: required power for DVD cable drive on Envy Phoenix 860

  I recently bought a Phoenix of envy and the first task was to cut the power of 500w and replace it with a bigger 80 more platinum supply (EVGA Supernova 750w P2). I have a 980ti video card and added a few SSDs that require the increased power.

  While it is installed and works well, the Endowment had a [what I have now learned to know as] sata mini connector for power to the DVD player. Naturally my new power supply do not have that.

  Best I can tell is to get something like this: http://www.amazon.com/gp/product/B009JXKQ9O?keywords=mini%20sata%20adapter & qid = 1458574748 & ref_ = sr_1 _... (although I have will probably want it a little longer)

  This should allow me to connect the sata and power from the motherboard. So my question is that correct?

  Or something like that might work also, http://www.amazon.com/Syba-Cable-Molex-Adapter-CL-CAB40042/dp/B005BCNAWM/ref=sr_1_1?ie=UTF8 & qid = 1458...

  I guess that this connects to my diet?

  I bought a cable mini sata (6 pins) on ebay for a few dollars. Solved the problem. Subsequently my brother mentioned that the electricity company probably would send me a free.
  
  500 watts was barely sufficient to manage the graphics card processor and 980ti. I don't want a bill of $600 to replace my card because the power supply has failed. Not to mention that it is more than 10% more efficient.
  
  Thanks for the reply.

• How to stop the AUC, which requires authorization for Google Chrome

  Recently, Win7 control user account has the required authorization to Google Chrome for Start Up.

  Is there a a way to get rid of him, while having good security?

  In the Google Chrome type search box > right-click on > choose go to the location of the file > click Properties > click on the Compatibility tab and at the bottom click on "change settings for all."
  users' uncheck the box "run this program as Administrator".

• Required IOS for signatures to send to MARS

  I understand there is IOS that contains security signatures that can send syslog messages to MARS for alerts of signatures. These signatures of Base of intellectual property or is there another required train? I tried to make the tool Advisor software but cannot find anything. Thank you!

  Mike.

  You do not get the IDS/IPS features in the IOS for basic IP. The feature you're looking for is IDS or IPS. It is included in the enhanced security and FW/IDS IOS releases. Please note there are some significant changes between pre and post 12.4.11T IOS releases (mainly the diference between worm 4.x and 5.x signatures worm).

  If you want that data entered into the MSC, you will get several fields of data if the signature CETS rather than Syslog event streams.

• What required IOS for VPN

  Hello

  I have 12.2 (31) of Cisco IOS with my Cisco 2610 router. Is it possible to create the VPN tunnel with this platform. ?

  I'm looking for a communication secured with encryption as well. Is it possible, if not IOS will be required for the same...

  Thanks in advance...

  Dhaval

  Hi Alain,

  you need c2600-itpk9-mz image on your router

  iOS: 12.2 (23) SW

• Required roles for the browser and the homepage customizations DURATION

  Hello

  We are implementing the Fusion Applications on site and made some customizations to the Navigator menu DURATION and content of the home page (AtkHomePageWelcome). We want to give minimum privileges to certain users to make these changes in the future, what are the correct roles for this? Read the security reference manual I understood that the Navigator changes require Application Menu customization to have role, is this correct? What customizations to the site level to the homepage through Page composer? What is the exact role of updating the content of the page?

  We do not want to cede broad Application Developer or administrator applications etc roles just to make these limited changes.

  Thank you

  Joonas

  This post describes the various roles involved in the role of the right level. You can, if you want to watch in the accurate definitions for these roles, for example using APM and build your own role (s) with the appropriate access you want to restrict access for more.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• required (asterisk) for selectonechoice in the table

  Hello

  I created a table. Table has the value and the label of two columns

  label is selectonechoice and text input value

  To view the selectonechoice as the label I did readonly = true

  but bacause of the asterisk sign is not displayed for the field mandatory also tool tip is not displayed for the field that are necessary.

  Required property used for text entries (value) and the selectoncechoice (label)

  With the help of Studio Edition Version 11.1.1.9.0

  Help, please

  Label is a selectOneChoice? a little weird. What is the requirement?

  And if necessary the sign didn't come for soc, surround with af: panelLabelAndMessage set true to the panelLabelAndMessage required true or showRequired and try.

• Required DRS for VSAN HealthCheck?

  Sorry, I know I'm going to go here on a branch, but it is, or why the DRS is required for the VSAN Health Check Plugin?

  We have the license for vSphere 6 Std and VSAN.

  I tried to install it via the web gui and esxcli, but no dice on activate.

  Thank you

  -Justin

  references

  http://www.VMware.com/files/PDF/products/VSAN/VMW-GDL-VSAN-health-check.PDF?RCT=j & q = & ESRC = s & source = Web & CD = 1 & ved = 0CB8QFjA...

  ttp://www.VMware.com/files/PDF/products/VSAN/VMware-virtual-SAN6-proof-of-concept-Guide.PDF

  VMware KB: Virtual SAN Health Service - Health Cluster - VSAN put day healthcare Service

  VMware KB: Installation of patches on an ESXi 5.x/6.x host from the command line

  

  

  I threw in the towel. I have installed evaluation licenses on the hosts, DRS Automated helped, and I am trying to install the Health Service.  I'll let you know if I see side effects after I put it to any DRS and Standard licenses.