Requirement for laptop

Similar Questions

• 2000-2321TU HP: windows 7 (32-bit) Driver required for laptop HP 2000 - 2321

  I cruelly windows 7(32 bit) drivers for my very urgent notebook.please help me.its.

  Hello:

  You should be able to use the W7 32 bit drivers for the HP 2000 t - 2A 00 on your model, except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-2000-2a00-notebook-PC-series/5259212/model/5275371

  If there is no 32-bit graphics driver, try one of this model...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5225013&swItemId=ob_104662_1&swEnvOid=4052

• HP Pavilion g series: administrator password to the power required for laptop

  Hello

  My phone requires me to enter a password administrator power. After three failed attempts, she gives me with the code: 67240200.

  Can you help me please?

  Thank you

  @AJ34

  Enter 78128826

• Laptop of HP 2000 2B19WM: drivers required for laptop HP 2000

  OS: Microsoft Windows 7 Professional (64 bit)

  Type of system: PC based on x - 64

  Model: HP 2000 Notebook PC (2B19WM)

  BIOS: InsydeH2O Version CCB.03.72.35F.47
  Processor: AMD E-300 APU with graphics Radeon (TM) HD (2 CPUs), ~1.3GHz

  Device Manager is showing two unrecognized devices, their name as well as hardware ID are given below:

  Ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_188B103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_188B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_188B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00
  

  1. I will be grateful if I be informed the appropriate drivers.
  2. I also want to know that this is any more devices that are not detected by Device Manager because I think it is bluetooth in this model and the Device Manager does not show bluetooth devices.
  3. Other imaging devices in Device Manager show HP Truevision HD, how can I use this camera to take pictures? This device does not appear in the 'Cameras and Scanners to the view' section of the control panel.

  Thanks in advance.

  

  Hello

  Try the following drivers.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56461.exe

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56467.exe

  Kind regards

  DP - K

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• Laptop & graphics card required for Adobe Cloud?

  Hi all

  , I'm looking for a new laptop and want to be sure that I buy one with the conditions required for Adobe Cloud.  Is the configuration required for Cloud based on different software (eg. Photoshop, After Effects, Flash, etc.) or are there requirements just to use the Cloud?  I don't know much about computers so I'm having a hard time find one that meets the required conditions.  I would be very happy if someone who already uses clouds of Adobe can provide suggestions.  I'm not an Apple person, currently I'm looking in the following laptops:

  Dell Inspiron 14z:

  3rd generation Intel Core i5 processor

  8 GB memory
  

  500 GB 5400 RPM SATA HDD and SSD 32 GB mSATA

  AMD Radeon HD7570M 1 GB video card

  Dell Inspiron 14R:

  4th generation Intel Core processor i5-4200U

  8 GB memory

  1 TB SATA hard drive 5400 RPM

  Graphics Intel HD 4400

  Sony Vaio did:

  3rd generation Intel Core i5 processor

  NVIDIA GeForce GT M 740 graphics card (1 GB) hybrid

  750 GB (5400 RPM) hard drive

  8 GB (4 GB x 2) DDR3L - 1600 MHz

  Thanks in advance for any help you can provide!

  
  

  Thanks Ashish!  It looks like Microsoft Windows or Mac OS and internect connection is required for the creative cloud desktop app, so I think I have it is not to worry about the system requirements for each program of the meeting?

• I forgot the password for Windows 7 laptop and password required for all downloads

  No disc reset was created before there is another established user except the guest account, but even with the admin, a user lost password password rights is required for all downloads and updates. Cannot download even a password cracker because it requires a password to complete all downloads. What can I do? It's very frustrating.

  The legal option only when you do not know the password is to copy your files, you have all to CD or another drive for backup, then clear the computer and reinstall Windows.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• drivers for laptop HP 14 14-r204TU

  I have just re install my windows on Windows 7 pro 64-bit and I can not find some drivers on driverpacks for network controller, controller PCI encryption/Decrypption and Universal serial Bus (USB) Controller.

  where can I download it?

  Hello:

  PCI encryption/Decrypption, see if this driver works for the controller.

  This package provides the driver Intel Trusted execution engine Interface (CITY) for the laptop models running a supported operating system. The Interface of the Intel Trusted execution engine allows the Secure Boot and provides services required for the platform as Intel Platform Trust Technology (Intel PTT) security features.

  File name: sp69608.exe

  USB3:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp70030.exe

  Network controller:

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp69411.exe

  You will also need the bluetooth driver for this model of the wireless card...

  This package contains the installation package driver for Realtek bluetooth in the laptop models running a supported operating system.

  File name: sp69555.exe

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Re: Drivers link - for laptop HP Compaq 15-s008tu

  I'm having the same problem. Could not find the link to the driver for this product. My OS is Windows 7 64 bit.

  Hi @Jimbo1991 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your computer laptop 15-s008tu and drivers required for Windows 7. Here is a link to a page of drivers.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  I hope this helps.

  Thank you.

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• "A problem with this Windows Installer package. "A program required for this install to complete could not be run" when you try to install iTunes

  Original title: problems during the installation of products on vista with error message that indicates:
  I need help ASAP please! I tried to install the new Itunes software and my Vista laptop just will not let me... any ideas.

  I have download the new iTunesSetup and click it to start the installation process and the process begins. After 2 minutes, the following message appears:

  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

  I already did:

  • "To manage my computer' on automatic rather than manual
  • Guests of controls too and still no change
  This has been going on for about a week or two now, and I really need help.
  Any ideas or help would be appreciated.
  Thank you

  Hi once again, fortunately today I bring better news! As a result of a serious lack of assistance from Apple themselves, have no idea of "The Tech Guys" in the world PC and extremely unnecessary hours at Microsoft, I've sorted it me. In other words, the main problem with mine was the Apple Software Updater. Even with "Revo" I was unable to remove it. I decided to download "Windows Installer Clean Up" from there where I could find (it was also free!). I used it and immediately found, I could choose the Apple Software Updater and remove it with very little hassle in all. I proceed to download the new iTunes, and I'm a very happy Bunny! Thanks for nothing, Microsoft and Apple! Hope this helps - Dan