rerun a report without resetting page query other elements on the page

Similar Questions

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• Refresh the interactive report without scrolling page?

  Hello.

  I have a page with three interactive reports arranged vertically on the page. I want that each of these reports to refresh automatically, so I added the following to my page header:

  setInterval ("jQuery('#report1').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report2').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report3').trigger ('apexrefresh');", 10000);

  The code works and the data is refreshed, the problem is that when this happens APEX seems to focus on the report, it is refreshing and page scrolls to it. This means that the user could be down at the bottom of page 3 of the report but every 10 seconds they are caught back to 1 at the top of the page report.

  Is it possible to refresh the reports without going through the emphasis placed on them?

  I use the Application Express 5.0.0.00.31

  Thank you very much.

  Andrew V wrote:

  Hello.

  I have a page with three interactive reports arranged vertically on the page. I want that each of these reports to refresh automatically, so I added the following to my page header:

  setInterval ("jQuery('#report1').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report2').trigger ('apexrefresh');", 10000);

  setInterval ("jQuery('#report3').trigger ('apexrefresh');", 10000);

  The code works and the data is refreshed, the problem is that when this happens APEX seems to focus on the report, it is refreshing and page scrolls to it. This means that the user could be down at the bottom of page 3 of the report but every 10 seconds they are caught back to 1 at the top of the page report.

  Is it possible to refresh the reports without going through the emphasis placed on them?

  I use the Application Express 5.0.0.00.31

  See APEX 5 - IR r region without losing the focus on the region of origin for a similar problem, but I do not think that the workaround solution discussed here will be of use to you.

  APEX 5.0.1 patch that contains a fix for this problem is now installed on apex.oracle.com. Try your page there to see if it solves your problem. The patch should be made public quickly.

• Loading the main page halfway when Firefox starts - all other elements as the bar side and toolbars is loading properly. Height adjustment manually retains the setting for navigation all in session but don't remember setting when closing down.

  Height adjustment manually retains the setting for navigation all in session but does not remember to reset when closing down.
  Something was clicked inadvertently, but don't know what or how as Firefox worked fine a couple of days. Version 3.6.3. Help please

  Positions and sizes of windows are stored in localstore.rdf in the profile folder.

  Localstore.RDF to remove or rename the localstore.rdf.sav file in the profile folder to test whether the file is corrupted.
  
  See http://kb.mozillazine.org/Corrupt_localstore.rdf
  
  (attention: do not delete the localstore.rdf file in the Firefox program installation folder)

  Note:
  
  Delete the localstore.rdf file will reset the default toolbar customizations.
  
  You can rename "localstore.rdf' to 'localstore.rdf.sav' to test whether what it solves.
  
  Then, you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if she did not.

• Can we add menus dropdown, Jquery, flash animation and other elements in the website design through Adobe Muse?

  I'm a graphic designer and back to the Web site design. After seeing online Adobe Muse, I liked it and eager to Web design. So my question is, can we add additional items such as Jquery, flash, menus, and other types of animation when designing a website using the software Adobe Muse?

  Yes, you can embed codes via object > insert html in the pages of Muse, as animation can be added to the sites created in Muse.

  http://helpx.Adobe.com/Muse/topics/Embedding-HTML.html

  http://Muse.Adobe.com/inserting-edge-animate.html

  Thank you

  Sanjit

• Cannot create folders or other elements in the same drop-down menu in "organize bookmarks".

  Cannot create new bookmark files. 'Create a new folder' and all the other relevant elements that scrolls to organize the bookmarks are grayed out.

  I have exactly the same problem. Have not found the solution.
  21/07/10

• Can I use simple words in a paragraph to display other elements on the stage?

  I want to put a paragraph on the stage. The paragraph would look like this:

  'So forth and so... then, click here to read footnote 1, or click here to read the note 2.'

  As you can guess, I want the user to be able to click on the underlined words in paragraph - and have the appropriate notes appear.

  Is it possible to do this kind of thing in edge animate?

  TIA,

  Jeff

  Dear Jeff

  I did some try and find a way for you to do

  SYM. $("Text") .html ("here")

  $("#btn1").click (function () {}

  SYM.$("Note1"). Show();

  });

  Zaxist

• other elements with the change of font size to scale

  I do comics.

  Ive done a lot of work on this book

  and publishers want to take the size of the police up to a point. between a 5 and a 6.

  is it possible to change my font size and have the word balloons that are around them to scale too with it.

  Im trying to avoid having every thing of legends to the word balloons to eyball scale...

  Let me know.

  Thanks in advance

  angeltreads,

  If I understand correctly, in the right way, you can simply:

  (1) select what you wish to grow together;

  (2) in the palette/Panel transformation multiply by 1.2 (6/5, just add * 1.2) in the W or H Ctrl/CmdEnter area (to keep prportions).

• How to make a Flash swf file. start only after all other elements are on the DW page?

  Sorry if I'm posting in the wrong forum. I didn't know if I should be here or in the forum of Dreamweaver. Just trying to figure out how to make a Flash swf file. start only after all other elements on the page have been downloaded. Is that what you would do in Flash through publication settings, or this would be finished in Dreamweaver?

  You are welcome.  I just checked and there is an onLoad parameter you can use in the BODY tag to ignite a javascript function.  I hope that's what this implies, that it is.

• Value of the page element in the APA process not maintained after the send this page

  Hello - I have a sequence of events that goes like this:
  
  (1) region 0 REG_1 Page is rendered before footer
  -REG_1 region uses javascript / AJAX to call App process PROC_1
  -PROC_1 defines Page1 item PAGE1_MESSAGE for X
  -After that PROC_1 runs correctly, REG_1 don't doSubmit()
  
  (2) region 0 REG_2 Page is rendered before footer; in this case
  After the page sent by REG_1. (Requirements to ensure that)
  REG_1 has not yet reached)
  -REG_2 region shows an alert PAGE1_MESSAGE (= X).
  -REG_2 region uses javascript / AJAX to call App process PROC_2
  -PROC_2 sets page 1 point PAGE1_MESSAGE to Y
  -PROC_2 sets point Application DEBUG to PAGE1_MESSAGE (this is for debugging)
  -PROC_2 defines the point of Application APP_MESSAGE to Y (this is also for debugging)
  -After that PROC_2 runs correctly, REG_2 don't doSubmit()
  
  (3) after that REG_2 sent the page, here's what I have:
  -Point application APP_MESSAGE = y. good. That's what it has been for PROC_2.
  -Point Page 1 PAGE1_MESSAGE is bad. X. That's what he has been put to in PROC_1.
  -Point application DEBUG = y. good. This shows at least that PAGE1_MESSAGE was
  the value Y in PROC_2... but for some reason this value is not be kept
  After the application process is running.
  -There's that several other elements of the application located in PROC_2, and they are all correct.
  
  
  Any ideas as to why this is happening? It seems like it should be
  quite simple: set the value, send page, the value must be that
  I put it.
  
  Thank you
  Carol

  Hello

  Exhibition (doesnot save session state), I am not changing who is P1_MESSAGE_1.

  Why does that matter? Why does the hidden item behave differently?
  

  Yes, Hidden Items by usually default state saves. But this isn't the problem in this case because I had changed the item to display only (state saved) and that did not help. Finally back in doesnot save state.

  Try to replace alert (ajaxResponse); with the lines below

  $s('P1_MESSAGE_1',ajaxResponse);
  alert($v('P1_MESSAGE_1'));
  

  Maybe the session state is defined (server), but the value in the DOM HTML (browser) to P1_MESSAGE_1 is not defined. If adding the line above works then the hypothesis is correct.

  And I see that you made the source "static" assignment ...
  

  Yes, I made this change, because it was a reference in itself I think it was redundant. And I had to correct what I thought is not just before debugging. Which cannot be linked to the problem though.

  Kind regards

• selection of the ring-control do not work. Cannot select any other item as the first item.

  Dear programmers cvi,

  I have some problems with a control ring in a panel of the CVI. the ring comprises several elements. No matter what I choose, the result will always be the first item. I can't select something else than the first (Recent not necessarily the default item).

  When I redraws the Panel, it works for the next few days. but somday in built version (production-application) the selection of ring control no longer works. When I start the uir-file in the labwindows cvi gui editor, I can understand the problem. Even in mode 'exploit' I can't select other elements than the first.

  When I convert the ring article in another ring (F11 key), and then convert back into the original it works again (1-2 days).

  When the problem appears, the contents of the file is always the same!

  I also redraw the Panel in different versions of labwindows cvi (2010/2012/2013), still the same problem.

  another ring-control on different panels (many more controls) never come whith this effect.

  all the guys there whith the same problem?

  corrupted file IUR is in the annex.

  Thank you!

  Kind regards

  Lukas roeder

  Hi Lukas.

  If you think the UI to be corrupted file, you can

  -Save in a version different (e.g. 2013 instead of 2010) and see if that makes a difference

  -Save it as a text TUI file and re - import (Options / Save in Text Format)

• Paramerterized interactive reports - is there a quick fix to stop the query to run when the page is entered before user by clicking OK.

  Example of

  Currently, when the user enters the page interactive report runs (unless the user hitting ' go') and - does no data found because one "parameterized" field is required and the sql is not set to NULL values.

  I'm looking for a way to not run a query at all -until the user hits go for the first time on the page - each time that they re - enter the page in the same session, it would be OK to auto submit the query.

  I believe that I can install a hidden item and check on my interactive report E1 not null.  Then create a 'calculation' on 'after bid"that would set this value to a value - say 1.

  I can't seem to be able to get this to work however.

  In my interactive report - I wonder what 'type condition' should I use.  Any thoughts would be greatly appreciated.

  You have two regions, research and order Type. You have items in the two regions. However, I think you are talking about the area "Search" when you say 2 parameters.

  If you want to just display IR when the user clicks on 'Go' or click on 'Go' earlier in the same session, then I suggest,

  • Create a new item of the hidden page, P6_SHOW_IR
  • Create page process that runs when the user clicks on the button 'Go '. Here to update the value of P6_SHOW_IR 'Y '.
  • Create a branch that connects to the same page with "State of Session saving" checked (connections conditional, when click on the button "Go")
  • Set "Conditions" for the region of infrared, so it displays only when the value of the P6_SHOW_IR element is Y

  Kind regards

  Hari

• Without Refresh Page report

  Hello
  
  I want to generate a report without refreshment. When I get student into the textfield, the personal information of students details report (without page refresh) ability be generated.
  
  How can I do that.
  
  Thank you
  Maury

  Hello

  I don't understand. There is only a single page that the end user actually see. Another page is just SQL report.

  If this isn't a good solution you can find this useful code
  http://Apex.Oracle.com/pls/OTN/f?p=40323:12:8

  Take the pl/sql code. Change to your need and create on the application process.
  Call the process via AJAX and Insert/replace html returned in your area.

  BR, Jari

• Page reset without resetting the page header and body

  Hello
  
  I'm going to need like this
  
  I have two columns of page number in the report, we're at the head of the and one is the body of the model.
  
  First page number is the head - what is the total number of pages in the entire report as think page 1/5, I want to say to the header of the report a total of 5 pages.
  
  In the body of the report, I have one more page number column is for this special section as long as my report should be repeated for each Member.
  
  1 member out of page 1 - so the Agency fo rthat Member will have 1/1
  2nd member 2 pages - the body, I'll have 2/2 and 1/2 on the first page of that Member in the second page.
  3rd Member has 2 pages - the body, I'll have 2/2 and 1/2 on the first page of that Member in the second page.
  
  and as I said before to the level of the header, I 1/5.2/5.3/5.4/5.5/5 my total report is 5 pages.
  
  Can someone help me please how to do this.
  
  Thanks in advance
  
  Published by: Verdier on November 18, 2011 11:58

  I sent the updated file, please check.

• Call in the report for PDF download query does nothing

  I am trying to download a PDF report based on 2 queries. Each query has a where clause clause with values taken from the page elements. I installed Publisher OBI 11.1.1.5 and used the term of Publisher 11.1.1.5 OBI plug-in to create the RTF file that I downloaded then the components Shared-> presentation of the State.
  
  I created a new button in the region to call the report query. However, whenever I click on the button to download the PDF file, nothing happens. I looked at the debug and the button seems to be running OK, except that nothing happens.
  
  The APEX of BOIP configuration works since I was able to have BOIP generate another report that do not use the predefined query. In other words, parts of reports including the attributes defined print "allow printing of the report = Yes" and 'layout of report = report default layout' work very well. Reports based on the query predefined and launched with a button in the region do nothing.
  
  Environment: APEX 4.1, DB 11.2.0.2, BOIP 11.1.1.5
  
  Any contributions to this PDF issue is greatly appreciated.
  
  Thank you
  Reid

  Hello Reid,

  Thanks for reporting back!

  It now works with a button linked to printing the report query URL. This method was not working before because when I deleted/recreated the presentation of the report, the layout of request report report had to "use generic Report Layout. When I changed the presentation of the report query to the name of the correct report layout, button link to the print URL worked as expected.

  He therefore finally brought its fruits check attributes...

  Still, he doesn't when I create a button with action = 'Download printable report Query'. I tried several times, but couldn't make it work. It seems that it is a bug, but I can't say for sure.

  It should work as long as you have configured the report query according to the needs and assured the session state is included.

  Go ahead rather than use the with action = "Download the printable report query", I'll use a button with Action is "Redirection of URL" where the URL is the URL for the report query printing.

  In this case, my guess would be the session state, because you will always she, when redirecting to the session, and the report query seems to agree.

  -Udo

  P.S.: If you don't mind, please check all useful or correct accordingly to ensure that other users of the forum search can identify those posts easily.
  Thank you!