Reset password on behalf of "vmware" Orchestrator Configuration for a device

Similar Questions

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• Reset password on behalf of vpxuser

  Hello

  I don't know the password for the vpxuser account and want to reset. Is it possible to do it while connected to the ESX Server with the Root account?

  Thanks in adance.

  It is, but then Virtual Center will stop communicating with your ESX Server - because virtual center uses this account to connect with your ESX Server - I would remove your ESX Server to reset train your virtual environment Center and re add it.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMware orchestrator configuration problem: LDAP

  Hello guys,.

  I connect our HOV to our AD domain and I get the following errors:

  • LDAP connection successful but no users found. Check LDAP paths.

  • Found admin group / OR = Users, DC = systec.local

  any of you encountered this error?

  Kind regards

  Nuno

  When you use the integrated AD cases, you use CN = Users, not OU = users, given that Microsoft has used a different object than the organization unit type.

• Invalid configuration for the device '0'

  Since the upgrade to view 5.3 I get these errors and it's starting to drive me batty.  I have a fairly simple environment (1 security server, 1 connection to the server, standalone composer, standard vSwitches).

  Error messages:

  

  Here is what I did to solve problems:

  • I had a problem with having two composers in the environment at the same time (mainly because my coinstalled uninstalling did not actually uninstall as it was supposed to), but that seems now fixed.
  • Initially, I thought it was a problem with my model/snapshot, so I created a clone of my shot and used to create a new pool, still errors.
  • I created a new virtual machine Windows 8.1 and allows to create a new pool, yet of errors.
  • I deleted all pools and created new ones with my current Windows 7 and new VM Windows 8.1, still errors.
  • I tried a number of patches that I found via Google, but they do not seem to match exactly if the only one that I really was remove and add a new vNIC, yet of errors

  Which is really weird, is that desktop computers everything works as expected, I have just these annoying messages fills my vCenter logs so I would get cleaned up.  Has anyone seen cela or have any suggestions on what I can try?

  Mike Pagan

  What is the size of the VRAM on the pool?  I saw this when it is set to a size larger than 128 MB.

  Tony

• I forgot the password of the Orchestrator Configurator

  Is it possible to reset the current password of the Orchestrator Configurator? I've changed the original password ("vmware") he has been proposed in the Guide of the Insttallation, but forgot it.

  Thanks in advance!

  Hi Martell,

  To reset the password to vmware, open the C:\ProgramFiles\VMware\Orchestrator\configuration\jetty\etc\password.properties file and save it with this content:

  VMware = 92963abd36c896b93a36b8e296ff3387

  Then, restart the Server Configuration vCO and connect with vmware/vmware.

  Geri

  (Team of docs orchestrator)

• Bally Chohan - I forgot my blackberry reset password configuration?

  Hey, it's bally chohan, how to recover reset password?

  bchohan wrote:

  Hey, it's bally chohan, how to recover reset password?

  Read this for complete information and suggestions to regain access to your BBID > http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...

• Remove the configuration and reset password on A9K - RSP - 4 G

  We have completed the TURBOBOOT and updated version of the image, but we have to eliminate all the prior configuration and password.

  What is the procedure for that?

  Hello

  Xander and I have implemented this document presenting the different methods of password recovery.

  https://supportforums.Cisco.com/docs/doc-15870

  Let me know if that covers what you need.

  Thank you

  Sam

• Reset password administrator of vCO

  Use of vCO deployed unit of the vCO_VA - 4.2.0.1 - 507352_OVF10.ovf - hard to explain what happened. I had left the customer orchestrator for a few weeks and when I returned to this there was a message saying that I was disconnected. I tried to log in again and told me name of user and password were not valid. I have connected on configuration orchestrator and finds the network, LDAP, database, server certificate, license, start Options & Plug-ins - in red. When I tried to configure the LDAP category, the ability to set OpenLDAP did not exist. I assumed it was my problem because the announcement was not used before. I followed the instructions to activate the experimental support for OpenLDAP, I could then select OpenLDAP, but could not do the config to stick. Somehow trying to work with the Configurator, the password has changed. All I can do is currently connect to the console.

  Is there a way to reset the config/admin password?

  I want the workflow and apply to a new installation, if the config/admin password cannot be reset. Is there a way to dump the database from the console?

  Looks like you can not back in the web interface of Configuration vCO... It has nothing to do with LDAP, AD, OpenLDAP, etc... you're supposed to open a session with the user account is 'vmware' - by default, the password was 'vmware', but you probably invited to change at first use or maybe you changed and have forgotten what you changed it to. If you are unable to log in with the account "vmware" (only possible for the account), then maybe you need to reset the password to "vmware". If this is the case, please see this post: http://communities.vmware.com/message/1464555#1464555

  Note: The unit, you will find the file necessary to edit under the HOV/opt / / path somewhere

• CP4025: Reset password admin on CP4025

  I'm unable to log in with the administrator password, and it may have been changed somehow fear. When I go to resets-> 'Reset Factory Settings', he claims to have restored the factory settings but does not reset the printer admin password or hostname.  When I print the configuration after that, he always says "Admin Password - specified."

  How can I actually perform a cold reset such that the admin password is reset?

  Reset the NVRAM worked - the key is that it does not say in the manual that the NVRAM reset also resets the password for the device. In my hands, resetting the NVRAM finished as I hoped 'Reset defaults' would be and did not reset the serial number.

• Reset password Bios Pavillion G6

  Hello, can you please help me with BIOS password reset. My code is 50679379.

  Steps to follow:

  1. use the posted above unlock code to access the BIOS

  2 disable all passwords that are enabled

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

  6. then exit the BIOS saving & exit option to save the changes.

  Troubleshooting:

  Incase if the password does not work please try a Hard Reset as follows.

  1. power off the laptop

  2 disconnect the power adapter and remove the battery

  3. press the Power button for 30 seconds

  4. connect the power supply/AC adapter (leave the battery for now) & start Notepad

  5. If now see you a password, please enter the same password I've shared before and press on enter

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star KUDOS left to say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Can RV082 password lost, I get my backup configuration file.

  I forgot my rv082 of admin password, but I have a backup configuration. password can be decoded to him?

  Thanks for any help!

  No one really knows what information is in the backup file. In general, are stored passwords that do not need to be transferred elsewhere encrypted and cannot be decrypted. Most likely, you need to reset your router to the factory settings. But you can try asking your question in the support community Cisco Small Business for routers. The RV082 is now part of Cisco Small Business and there is few people Cisco who can check with the developers...

• VCSA 6 login and password - recovery or reset password?

  successfully upgraded from vcsa5.5 to v6, but we cannot connect to the console.

  tried the name of user and password previous combination but no luck.

  tried the [email protected] credentials with no luck.

  2 questions.

  1. does anyone know what would be the default values?
  2. How to perform a recovery/reset password on vcsa6?

  Have you tried the steps to reset password for 5.5?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2069041

  You must restart the VCSA to try that, but I can't see a procedure for v6.0 and do not have a single montage in my lab at the moment.

  Rich

• AD Plugin for VMWare Orchestrator

  Hi all

  Long time Trawler, first time poster.

  I'm working on self-service provisioning workflows for my business. I try to use the AD Plugin to allow me to remove a computer AD account.

  I downloaded the latest Version of the Plugin, but I can't work. Here are a few notes:

  The account that I have configured for the plugin to use has the permissions to add/remove Machines in the domain. I tested by connecting computers and AD users and by removing certain computer accounts manually.

  Inside Orchestrator: I can navigate the tree very well, but when I try to use the built in Workflow selector window "To destroy a computer" appears empty.

  I tried duplicating the workflow, and it change so that it displays the AD tree, and then he shows me all the machines, but still, the workflow does not: "Cannot Find Function Destroy in objectNotFound.

  I tried a few script with API's AD and get errors that two functions are found or Null Pointer Exceptions.

  I am at a loss: has account permissions: he can see the computers in the tree but not of mode switch, but can't select them.

  Yet in AD users and computers the same account will happily remove machines.

  I did have version 1.2 of the plugin and now have 1.3, but nothing has changed.

  Any help would be great guys.

  Kind regards

  Ash.

  I found a solution. The problem is extra information was captured by the output of the command of the orchestrators. He was capture the result of the query, but included a line break/CR (even when the piping directly in DSRM).

  Solution is to execute commands to separate 2: execute dsquery and then perform a regex to capture only the DN. Then run with this DN DSRM. works very well and I only need to provide the computer name and the credentials for the removal of the means.

  Thanks lot to qc4vmware for assistance.

  Here's the updated code:

  Var back = false;

  Query AD for DN of computer

  var commandQuery = ' computer dsquery.exe - name "computer"u"+ username +"-p"password".

  Run the Query command

  var cmd = new Command (commandQuery);

  cmd. Execute (true);

  var output = cmd.output

  need to remove any what extra garbage results

  DNs = output.match("\".*\ var "")

  Results of the newspaper for DSQuery

  System.log ("QUERY RESULTS");

  System.log ("command:" + cmd);

  System.log ("output from the command:" + cmd.result);

  System.log ("output of the command:" + cmd.output);

  System.log ("Match DN is" + DNs [0])

  var commandDelete = "dsrm" + DNs [0] + '-noprompt ' + 'u' + username + '-p' + password

  System.log ("Delete command:" + commandDelete)

  Run the Delete command

  var cmd = new Command (commandDelete);

  cmd. Execute (true);

  Results of the newspaper for DSRM

  System.log ("SUPPRESSION OF RESULTS")

  System.log (cmd)

  System.log ("output from the command:" + cmd.result);

  System.log ("output of the command:" + cmd.output);

  If (cmd.result == 0 & cmd.output.indexOf "(successful dsrm") > = 0) {}

  System.log ("AD object deletion successful with DSRM computer.");

  Return = true;

  }

  else {}

  System.log ("Failed to remove AD computer object.");

  }

  return return;

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB