VMware orchestrator configuration problem: LDAP

Similar Questions

• vCenter / Orchestrator configuration problem

  Hello

  While the implementation of vCenter Server and Orchestrator configuration, I had trouble to finish. I am not able to find any user who is a member of the Group of Directors vCO to fill the Plug-ins section which is necessary to Boot Options. The other Orcestrator server cannot run to add a user in the Administration Group (assuming that this is the place that it should be done) wihout fill first the Startup Options section in the Web Configuration.

  The back Orchestrator Installation and Configuration Guide not clearly how do a user member of the management group until the administrator has started, however, it says "enter the credentials of a user who is a member of the group administrator Orchestrator." I tried the default user (vmware), the user I set up in the pub for vCenter Server service running and the local administrator, but he keeps giving the error «Bad credentials for the installation of the plugin.» "Unable connect user: vCenter, unknown user.

  Any help is appreciated how go about this situation.

  Hi Martell,

  I'm sorry to hear that you are having problems with the configuration.

  Let me see if I could erase this until relations are here.

  1. the user name that you used to connect to the Configurator is not related to any configuration in the configurator.

  2. the user of the plugin in the plugin name must be in the ad group that you specified in the LDAP tab under group admin vCO.  Here is my config of the sample for the vCO admin group: "CN = vco - admin, CN = Users, DC = pm - vco, DC = local.

  I guess that if you add the service account used by running vCenter Server to the group admin vCO listed above you will be ok.

  Let us know if it works.

  SIA

• VMware vCenter Orchestrator Configuration problem

  Hi guys,.

  My company has just installed VMware vCenter Orchestrator and we try to create a new host to vCenter server with version 5.0.1.

  Can someone point me to documentation that shows me how to configure the web page in the print screen attached?  Or can someone please tell me what is needed in the empty fields, etc.?  When we try to enter info, we get alerts of service of red light of the vCenter Server tab and the tab startup options.  Both give us a red circle indicating a problem.

  Thank you!

  A free IP address? Oh... No, this plugin configuration is not actually CREATE a vCenter for you, it allows you to configure the vCO to speak to an EXISTING vCenter server you must already have a server vCenter configuration somewhere and you must use the FULL domain name or address IP of this server in this configuration.

• VMware Vcenter Orcestrator Configuration problem - LDAP connection

  Hi all

  I got the task to implement Ccenter and I'm having a small problem.

  I configured everything except the configuration of the LDAP connection in the web configuration of vcenter.

  I am receining the following error:

  Type	Title	Description
  Error	LDAP connection successful but no users found. Check LDAP paths.	LDAP connection successful but no users found. Check LDAP paths.
  Error	Group admin not found

  I have no real expereince LDAP so I'm totally lost on this error message.

  Can anyone offer any help on this problem?

  Thank you - Ron

  For the configuration of Orcestrator see this good guide:

  a user's guide to configure vCO

  And see also this case:

  LDAP Orchestrator 4.0 configuration

  André

• Reset password on behalf of "vmware" Orchestrator Configuration for a device

  Today I've updated our Orchestrator device to the latest version to correct the error of the bash shell.  Before I did I connected to the device using accounts to the root and vmware (root used for vmware and web site of the device used to connect to the web site configuration) - both worked so I don't know I got the correct password before the update.

  After the update and restart, root always works with the initial password I had set, but vmware account no longer works.  I tried the original on the box password (vmware/vmware) and the password that I know worked before the upgrade - no work.  I found a lot of posts, how to reset the password when running with a host Windows Orchestrator - but not the device.  Does anyone know how to reset it when you use it?

  Also - is this a known issue?  Updated unit horks the configuration password?

  Thank you

  NK

  Then, try another browser. He has had problems with IE.

  Joerg

• VMware Studio configuration problem

  I use Vmware Studio to build a Windows 2003 SP2 machine. Everything is big. The problem occurs when VMware Studio completes the transfer the transional VM on the VMware Studio machine. Export OVF ends and then I got the following error:

  [error] Interrupted by the user or system (signal Undefined subroutine & cannot call method 'State' to a value not set in line /usr/share/perl/5.8/VMware/VICommon.pm 1878: fault_string called at /opt/vmware/lib/build/VADK/ProvInterface/Vim.pm line 1527 fell)

  If I build the virtual machine in VMware Studio with the transitional retain verified VM work ends. If the transient virtual machine does not check the work fails.

  I think that this problem is related to one of the VADK timeout attributes that are documented in the VMware Studio Administrator's Guide.

  the line Vim.pm 1527 - deals with transitional VM during removal of the host and reciving a 'State' of success. If the State successfully is not getting the job is aborted.

  Can anyone help?

  Without looking at the curl library code that uses the ovftool group, I can't really tell you. I saw this bug and thought of you and thought maybe it might be the cause. My guess is that anything which would need to be escaped to the URL could cause trouble.

  Don't forget to mark it as answered, if indeed it was anwer it. Thank you.

• I forgot the password of the Orchestrator Configurator

  Is it possible to reset the current password of the Orchestrator Configurator? I've changed the original password ("vmware") he has been proposed in the Guide of the Insttallation, but forgot it.

  Thanks in advance!

  Hi Martell,

  To reset the password to vmware, open the C:\ProgramFiles\VMware\Orchestrator\configuration\jetty\etc\password.properties file and save it with this content:

  VMware = 92963abd36c896b93a36b8e296ff3387

  Then, restart the Server Configuration vCO and connect with vmware/vmware.

  Geri

  (Team of docs orchestrator)

• LDAP Configuration problem - BEEP in a deployment of OBIEE

  All,
  I have an OBIEE 11 g (11.1.1.6.0), including environmental BI Publisher put in place. I have successfully completed the integration of OBIEE with LDAP and LDAP ID user can connect you with the Group/privilege information is applied as announced. BI Publisher, however, is not so cooperative. Here's what I have:
  
  As part of the LDAP configuration, I replaced the BISystemUser id with a user based on LDAP, ADBISystemUser id. However, whenever someone tries to connect, they get the error message * "[53012]" user authentication failed: adbisystemuser "*." The BIP newspaper shows this same message, preceded by the message * "[nQSError: 43113] Message returned by OBIS." * I know with certainty that this user id is configured correctly - OBIEE users are able to connect, and my LDAP browser is able to connect using these credentials.
  
  At RANDOM, I have the Administration-> Security page configured as follows:
  
  Local superuser: enabled (this is the only way I can connect now)
  
  Authentication: authentication UNIQUE not selected; Use LDAP selected and the correct LDAP, id, password etc entered configuration settings.
  
  Authorization: security model = BI Server and the correct settings for this entry (entry in the installation, no change)
  
  
  I searched nQSError 43113 and 53012 and validated different suggestions I've seen without success. I can't tell you how many times I rebooted services. I have reset the GUID, verified passwords/accounts are locked out, tested and retested in BEEP passwords match those of LDAP. The only thing that worked (sort of), was when I jumped LDAP protocol for authentication and set up LDAP for authorization (3rd section on the Administration-> Security Page). When it is configured for LDAP, the BEEP was able to bind to LDAP and users could connect. Unfortunately, given that we were not BI server authorization, users could not see the folders, or they would avoid data sources or report objects. What do we have this test was to confirm that BEEP pourrait LDAP access. It is not the way I need to do.
  
  The last thing I tried was to adbisystemuser id in LDAP so that it lay in the same "folder" as all my users instead of a folder, separate service accounts. Even this was not useful. I implemented the XMLP * groups, even though I do not expect that these are referenced. The id adbisystemuser is a member of XMLP_ADMIN, and users have been added to the XMLP_DEVELOPER group, for what it's worth.
  
  Suggestions or recommendations on how to get the BEEP if authenticate to LDAP would be really appreciated!
  
  Thank you!
  Eric

  Eric,

  In my setup, I use Fusion Middleware as a model of security and everything seems to work.

  In the documentation model Oracle BI Server is Legacy only:

  5.2 integration with Oracle BI Server Security
  The security option Oracle BI Server is for customers who want to use the authentication of the legacy of 10g. This section does not apply if you set up Oracle Fusion Middleware security.

  Michael

• Choose an account to use for the Orchestrator configuration

  There are 3 places where Orchestrator requires a specific, specify the installation user account:

  1. in "Orchestrator Configuration" tab "Authentication" - registration of the Orchestrator with SSO

  2. in "Configuration of Orchestrator" on the tab "License"-> "add a vCenter Server License.

  3. in the Orchestrator Client, under the workflow "to add an Instance of vCenter.

  
  

  If after all this has been implemented successfully by an employee who uses his user account AD for these 3 functions, then later an employee leaves and the account is removed from the AD, it will cause a problem with each of the above configurations that have been made?  Will be always registered orchestrator, under license, and vCenter added Instance?  Or things begin to break / stop working?

  
  

  Thank you!
  

  SSO should continue its work and license will continue to work until the service restarts... and the controls for the license with the vCenter server... I don't think that you will be able to install any new plugins if the account has disappeared, as well.

  My recommendation would be to use a service account is configured in Active Directory or SSO vSphere.

• VMDirectpath configuration problems.

  Well, I think I Passthrough (VMDirectpath) configuration problems. I use vSphere VMware ESX, 4.0.0.

  I tried to configue passthrough, so I checked Configuration-Hardware-Advanced setting and I don't found "no device currently activated for passthrough.

  I clicked on "configuration Passthrough.. ' and tick"Mark of Passthrough devices"then I found all USB devices are passthrough capable but not running in passthrough mode and PCI/PCI bridges are not able to passthrough.

  After ignoring the warnig message ('vmnic0' assignment, which used by the virtual switch 'vSwitch0' for passthrough access can make the inaccessible host and can require a lot of effort to cancel.), I marked as the relay device, and of course I've known the significant effort to cancel. :$

  I could not access the server, and the start was now available for some time.

  What I want to really know is.

  I'm looking for the correct devices for passthrough

  and what was the Passthrough configuration problem.

  Is this Client vs server problem? or materials (such as the version of the kernel or CPU specifications)?

  Anyone knows the solution or has any advice, please help me.

  Thank you.

  Kwangwon Chae

  Hi kwangwon, it seems like you just a physical network adapter on the host ESX (i) and is used by the vSwitch0 (at installation time is created inteface vswif0 here commonly called console port or management service), that's why you get this 'warning' when you try to set this for VMDirectpath pci device and also, that's why you lose your connection to your host because it can no longer be used by your esx server.

  Kind regards.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• Configuration problem?

  I'm new to Labview. I can't connect with 3458A. It works with 34401. I use a USB/GPIB from Agilent 82357 B interface. I have a VEE program that works with the 3458A. I think I have a driver or configuration problem. I am at a total loss, any help would be appreciated.

  I got it to work with the correct command. Thanks for your help. I have much better understand how this works now.

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Network Configuration problem

  Hello:

  Since last week, when I click on an icon, for example, the Page Home/Windows 7 does not come on the screen.  Instead, warning to appear at the top of the screen saying... Problem with Internet connection or Network Configuration problem.  After 5 minutes, or later, however, the screen came, but it is very slow to open web pages.

  This problem occurs most often during the night, however for the last two days, sometimes also during the day.

  Until this problem started out of blue, wireless connection with Comcast was very smooth-ride,... instantamously the homepage of popping up.

  Hints on this would be greatly appreciated.

  Thank you

  This sounds like a problem with your Comcast service. In the United Kingdom, I would suggest that you run a speed test on your connection speed. You can get no doubt do the same wherever you are. While it could be the quality of your line, the calendar offers it's the volume of traffic from when children arrive home from school until they go to bed.

  You could compare notes with other Comcast customers.

  http://forums.Comcast.NET/

  Hope this helps, Gerry Cornell