Reset the default values of properties of Vista user
- Properties of Windows Vista have been corrupted by the installation of a model of MS to MS Word. Which is more easy/quick way to reset all of the values property to create a model of usable user properties / work to replace all the user files that seem to vary in properties?
- How to best proceed to standardize all users would be also appreciated!
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
How to reset the default values for the import of images
With the help of Windows 8. file import settings have been changed for a tag, which was a mistake. I can't change the import settings because the import happens too fast for me to get click on that link the import settings. Is there a way to reset the default values to their original settings, so I can get things organized again?
If it isn't a recent phenomenon then try to fix things via the system restore.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
http://support.Microsoft.com/kb/936212/#appliesToSee, control Panel\All Control Panel Items\Recovery\ Open System Restore
Change the settings for importing pictures and videos
http://Windows.Microsoft.com/en-AU/Windows7/change-settings-for-importing-pictures-and-videosSee control Panel\All Control Panel Items\AutoPlay, maybe you can click on 'Reset all default settings'?
-
Reset the default value does not
'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags. Someone at - he never encountered this before?
I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing. I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time. I have to define arrays of strings individually to null.
I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel. Not sure if this is related.
Thank you.
This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.
"Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.
-
Reset the default value at the close of the program
Hi guys,.
I should work on the main piece of my program, I think practical features for the user.
A feature is to have the user entered by default the current value at the close.
For example, in my situation, the user must specify the multiple instruments GPIB address.
After that program has been executed and completed, the default values will be replaced by current address of GPIB
like the GPIB addresses of the equipment will probably not change.
I noticed the function of 'The VISA resource name'->-> use current default value of data operations.
Is there a programmical way to change this?
Thank you
William
You cannot change the default values of a VI running. Instead, write the data to a configuration file to the fence. When the program opens, read the config file and set the values for what is in the file.
Lynn
-
I changed some values in my regedit and now, some programs will not open, I do not remember that the values have been changed, there at - it a reset or return to the default value of regedit? My os is vista... nobody seems to know how to solve this problem
Hello
Try a restore of the system back to before that you did.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
I hope this helps. -
Hello.
Statement of the problem is very simple: Firefox won't create bookmarks.
New installation with Mint 17. New generation of PC with Asus A58M-A/USB3 motherboard, AMD A4 6300 processor 4 gig memory stick.
All Mint and Firefox packages are up to date.
A new profile has been created for the test, Firefox has been started in safemode, purged and re-installed and reset to the default values. None of these actions have contributed.
Here is the info according to the troubleshooting information in Firefox
The application databases
Name: Firefox
Version: 33.0
User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:33.0) Gecko/20100101 Firefox/33.0
Windows multiprocessing: 0/1Reports of incidents for the last 3 days
All Crash reports
Extensions
Name: Mint search Enhancer
Version: 1.0
Enabled: true
ID: [email protected]Name: elegant
Version: 1.0.7
Enabled: true
ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}Graphics
Description of the adapter: X.Org - Gallium 0.4 on AMD ARUBA
Device ID: Gallium 0.4 on AMD ARUBA
Driver version: 3.0 Mesa 10.1.3
GPU accelerated Windows: 0/1 Basic
Vendor ID: X.Org
WebGL Renderer: X.Org - Gallium 0.4 on AMD ARUBA
windowLayerManagerRemote: false
AzureCanvasBackend: Cairo
AzureContentBackend: Cairo
AzureFallbackCanvasBackend: no
AzureSkiaAccelerated: 0Important change preferences
Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141013200257
Browser.Startup.homepage_override.buildid: 20141013200257
Browser.Startup.homepage_override.mstone: 33.0
dom.mozApps.used: true
extensions.lastAppVersion: 33.0
Media.GMP - gmpopenh264.lastUpdate: 1416067922
Media.GMP - gmpopenh264.version: 1.1
Media.GMP - manager .lastCheck: 1416067922
network.cookie.prefsMigrated: true
places. History.expiration.transient_current_max_pages: 80569
plugin.disable_full_page_plugin_for_types: application/pdf
privacy.sanitize.migrateFx3Prefs: trueImportant preferences locked
JavaScript
Incremental GC: true
Accessibility
Enabled: false
Prevent accessibility: 0Versions of the library
NSPR
The expected minimum version: 4.10.7
Version: 4.10.7NSS
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSSMIME
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSSSL
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSUTIL
The expected minimum version: 3.17.1
Version: 3.17.1Experimental features
What other information can I give?
Thank you.
Jim
You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
Well whenever I use firefox I have watch some youtube vids watch stuff on jtv, maybe even play some runescape and then after that I have quit firefox everything resets to the default values, and I don't know why it does this I have scanned my computer with anti virus/malware/spyware and nothing seemed
These steps help?
- Rename the * prefs.js in the profile folder in * prefs_2.js (for backup, but Firefox would not be able to see them).
- Exit Firefox via file - Exit menu;
- Restart Firefox, look for the question.
-
is there a way to reset the appearance of front object to the default values?
Is there a way to reset front panel control or the appearance of the indicator to the default values? For example, let's say you take a Panel before complext, change all the fonts size, ridiculous color random colors and resize all controls and indicators of odd sizes and then save the VI. So, what is the most effective to reset the controls and indicators way to default appearance they had when they were initially created? Is the fastest way to create a new control or the indicator for each control ruin and the indicator and rewire the entire schema?
-root
You could do a replace (right click) on the updated control and replace it with the original order, this would save you the rewiring but when even require manual labor.
-
I; m getting this message during the installation of the new bios. my touch pad is going crazy, then I was told by hp to update bios F 0.6 to F06 f. However when I turn the computer back lights are not flashing and I get this message "CMOS is invalid health check sum", check if the bios setings can change. reset to default values". HP doesn't seem to know what the problem is. can anyone help. It's a netbook new, purchased in the States but in Malaysia now and he cannot return as too costly. Help, please...
Please repost your request to the experts in the Forum for HP laptopcomputer laptop HP. Thank you! Carey Frisch
-
I pressed the reset button default values during the installation on Officejet 4620 navigation all in one, now I can't connect to my wireless network. My router is a box of phone company that I do not have access to. Any help?
Oh, sorry. Make sure the USB cable is NOT connected when you run the software or it will assume that you want a USB installation. It will ask you which type of installation desired and, of course, choose wireless.
Later you will be asked to plug a USB cable. Wait until he asked.
-
Firefox will crash/freeze constantly and reset to the default values
For the last few weeks, I had a lot of problems with Firefox crashing. Whenever I try to open a new tab or load a web page, it will freeze. Sometimes, it's only for a few minutes, while other times it lasts up to an hour, and I have no choice but to close the program using the Task Manager, as any attempt to close normally fail. Is most common in the first few minutes after I run Firefox, and the program has been slow on this subject for a while, but usable after waiting a few minutes to load completely. As I said well that during the last weeks it has completely been lock up and crash when it happens, and it continues to occur after I have already loaded web pages and try to open new ones.
I tried a complete new installation, and the problem has been resolved for a few days, however, after a few days without access to the internet and try to connect again, the problem is even worse than before. Now, from time to time my Firefox resets the default settings completely, dredging of my page "New tab" pinned tabs, as well as remove any topic, I asked.
This parasite quickly made Firefox unusable for me, which makes me very angry that I much prefer it to Google Chrome. While I don't know that it would be useful to discern the question, here is also a list of all the extensions I have installed as well as the plugins that I have and that are still active, (with all my other plugins be disabled or 'request activation'). With the exception of "Adblock Edge", I had all the extensions installed for several months with no problems. "Adblock Edge" itself I only installed after uninstalling and reinstalling Firefox to try to solve my problem. My current version of Firefox is 35.
Extensions:
Edge of Adblock 2.1.7
DownloadHelper 4.9.24
0.1.7.3 private tab
Adblock Plus 2.6.7Plug-Ins:
Shockwave Flash 16.0.0.296
Unity Player 4.6.1.51269Make a check of malware with several malware scanning of programs on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender:
http://Windows.Microsoft.com/en-us/Windows/using-Defender - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
- Malwarebytes' Anti-Malware:
-
Reset Windows Picture and FAX viewer as the default value for jpeg files after loading of Corel
I put Windows Picture and FAX Viewer by default to open jpeg, tiff and other pictures, so it appeared as an option in the drop-down list to view attachments that have been downloaded. After loading the software Corel Draw, it is now the only option to open photo files even if Windows Picture and FAX viewer is always defined as the default value. How to restore Windows Picture and FAX Viewer as a choice?
Have you looked into the Corel software preferences to see if you can cancel these associations?
There is usually backup keys are created in order to return to the previously used application.
-
How can I reset the default settings of the monitor for Vista
Somehow, I ended up setting my screen laptop like I have look on the side for one of the two users on the PC. The other user is fine. Any ideas on how I can reset the default to display monitor?
Try holding CTRL + ALT + UP arrow at the same time. You can also try the other arrows. I hope I could help
-
I can't get the program to reset the default settings, enough to open the mini Bridge... I tried several times and it does not open and you must be able to display two files in the application window and be able to work on it and move layers by following the instructions...!
Cannot be done in 2014 of CC. Signs flash support has been removed in 2014 CC. Mini Bridge used Flash panels. Mini Bridge is not a CC option in 2014. Adobe keeps Photoshop so its retro-compatible with earlier versions of old Photoshop features and support can be removed and new features and support may be added. You will need to keep several versions of Photoshop for all your needs.
-
Re: Satellite NB305 - restore the default value of my internet browser
I don't know where to post this request.
Took forever to find words 'post new topic' and only clicking like to respond to a thread.I want to return to the default value of my internet browser.
I know where to do it. Stupid question, but I can not display OK or apply in the dialog box.Does not show, you use a smaller font, or try to move the dialog box does not work.
I actually want to google by default but tried in vain several times.
Says I do not have seplt correctly but I http: identical www.google.com/ appears on my desktopPC.Question 2: Bought this in the United Kingdom but I live in Australia.
How do I set up to reflect the Aussie not UK? Guess I have now will not kknow how to find answers to this.Also when I log in here the grey line saying profile connection House is in middle of screen so hard ro read the words above and below.
> I want to restore the default value of my internet browser.
What internet browser do you use? What is MS Internet Explorer?
Internet Explorer settings can be defined by default very easily.
Go to tools-> Internet Options
You will find different tabs as general, security, confidentiality, etc.
Visit the unique tabs and you will find Reset buttons or omissions.In addition, you can change the display
Here, you should check out Style-> default Style> Question 2: bought this in the United Kingdom, but I live in Australia.
> How do I set up to reflect the Aussie not UK? Guess now, I don't know how to find answers to this.I'm afraid, that I have no idea what you want to change it...
Maybe you are looking for
-
JBOD Qosmio G20 - could not initialize the disk of 320 GB - 1RAID-0
Hello, comrades Toshiba users,at first, I apologize if this question has already been answered, but I did not find the answer to my problem. One of my colleagues has a Toshiba Qosmio G20 with two 80 GB drives. Big 17-inch "surf-board-sized" computers
-
Unable to access Extreme Cruzer 16 GB USB 3.0
Strange thing happened to my Cruzer. When I attach to USB port I hear this sound characteristic that something is plugged. In Device Manager, it seems almost instantly. But when I open my computer most of the time I don't see anything. When my Cruzer
-
I have C-Cleaner and installed Fixcleaner. Do I need them?
Computer works more slowly. Do I really need these programs or do I need one or the other?
-
HP ENVY all-in-one - 5530 print page # and the date on the page.
How to fix my printer to print the page # and the date on every page that I feel. (up or down, whatever) just really need this info somewhere on the page.
-
Torch: OpenVG will increase the speed in real time for the scaling\rotating image?
Hello! I have such a problem. I need to view the satellite map (not vectored) with the possibility of scaling on in real time. Map is a bitmap either 1500 x 1500. I'm doing the scaling that requires 480 * 360 for operations return the second part of