Torch: OpenVG will increase the speed in real time for the scaling\rotating image?

Similar Questions

• If I activate 2 processors in msconfig, it will increase the performance of my computer... !

  If I activate 2 processors in msconfig > advanced > number of processors to 2 it will increase the performance of my computer... !

  Original title: two processors

  In most cases, you will probably have to use these options, but they can come in handy. For example, if you think that a startup problem is caused by the presence of more than one processor, you can limit the number of processors used to boot the system by activating the checkbox number of processors, and specifying a number.

  Mr President I'm on hp xw6400 workstation it has 2 processors and I use windows 10 on it, I want to run the two processors at the same time to improve performance is anyway you can tell me how...

  Hello

  Installation is possible, however, the operating system will use a processor at a single time. There are also the prerequisites if you want this kind of installation. Even if it is possible, we have no advice to use both processors at the same time, because performance will always be bottleneck depending on the hardware and the operating system you are using.

  Kind regards.

• When should update 2015 which will increase the size of the font on our screens? [was: font size]

  When should update 2015 which will increase the size of the font on our screens?

  This is an open forum, not Adobe support... so I doubt that anyone here knows... and Adobe discuss very rarely of the future products in the forums

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• LabView is in real-time for Compact FieldPoint necessary?

  Hello!

  LabView is in real-time for Compact FieldPoint (CFP) necessary?

  (in German: Ist für die von Compact FieldPoint LabView time use real necessary?)

  Thank you.

  Bye, Ouafa

  Hello

  If you just want to use Labview for logging and graphics (via Ethernet) AND that you do NOT use a CFP-real-time controller, you don't need to LabVIEW Real-time.

  For example if you use OR cFP-1804-Ethernet/Serial Interface for Compact FieldPoint.

  (http://sine.ni.com/nips/cds/view/p/lang/en/nid/202527)

  If you are using a controller real time you WILL LabVIEW Real-time.

  You can't function without it!

  Best regards

  Mencef

• I can load the speed in real time?

  Hi, guys.

  I'm working on my project now. Right now I use PCI 7344, UMI-7764, AC/DC motor sevro, their amplifiers and the camera of the UAB.

  I try to repair the braiding point machine to weave leadership x. usually the Plait point oscillates around a point in x direction.

  At first, I need to get the position of the point using cam USB, I've done braiding. The positions I got the cam of the UAB is in real-time.

  Then, I need your comments the position of the motion control loop. I intend to use the position to calculate the speed that responded to the questionnaire, which is real-time, too.

  Engine going this speed. Thus, it is supposed to get that engine will decrease or increase depending on the weaving point moving.

  I don't know if we can do it. I have yet found the relative position.

  Anyway, thanks in advance. Any idea and the idea is really appreciated.

  Guangli

  Guangli,

  as the camera of feedback is coming from a USB camera and with the during the calculations necessary to analyze the images, the behavior of your system in real-time is probably not very tight. Delays and jitter of the additional movement control operations are probably in the same order of magnitude as the delays and jitter, introduced by processing the image. If it's okay with you, can do the following:

  1. Load a maximum travel speed and acceleration/deceleration of the values for the axis
  2. With "Load Velocity override", you can pass the speed between 0 and 100%. Transitions of value axis a velocity to the adjacent spire to the value of the acceleration that you defined before.
  3. If you need change the direction of travel, you need to use 'Load speed' and 'Motion to start. " This operation is much longer that a speed of loading a substitute value, but in general you should not call this sequence too frequently.

  I hope this helps.

  Jochen Klier

  National Instruments

• RAM 1 GB upgrade will increase the performance of the Satellite Pro M30?

  My ram size is currenty 512 MB.
  I have the model Satellite Pro M30.
  As the old model, my laptop would be faster if I increase to 1 GB

  Hello

  Of course, the 1 GB of RAM would help increase the performance of your laptop.
  It must be useful for faster loading applications.
  You will notice also that your tools and other software will be faster.

  To upgrade to the 1 GB RAM, you would need two 512 MB modules.
  Usually the PC2700 DDR - RAM 512 MB module must be compatible.

  Welcome them

• R210 with PERC H200 will increase the possibilities for HD

  I have a PE R210 w/PERC H200.  The RAID configuration is RAID 1 2 HD.  I was looking at options to increase the storage capacity.  Someone please correct me if I'm wrong, but I read that it is not possible to extend the VFD by improving each hd one at a time to rebuild the RAID VD, then its extension to occupy unused space in HD.  There is no other HD slots available on the R210, along with options to do I have if I want to keep the current VD but increase the storage space on the server?

  Backup, replace the disks with the biggest, configure RAID, restore from a backup.

• After effects 2015 will not be displayed in real-time after update of El Capitan.

  Hello

  Has anyone have experienced the following problem and found a solution for this?

  Right after the update to El Capitan 10.11 the 2015 effects after ram Preview in real time.

  No matter what I do it won't work.

  I have a MAC Pro 2.7 last GHz 12-Core with 64 GB of ram.

  The AE 2014 still works well.

  Everyone who is having this problem, please install the last update: after effects CC (November 2016) corrections update is available that is supposed to finally close this thread for good! Please report if this problem has been resolved.

  If you do not update yet, wait a while until you see. try again cloud creative app by typing Ctrl + Alt + R. I see it.

  

  This update is 14.0.1 and a bug fix for number of problems disturbing especially for Mac users. It solves not all bugs that are new in this version - look here for the bug #2 and #3 which are not yet fixed (bug #1 is fixed I think): known issues in after effects CC 2017 and, hopefully, a bug fix for those who will come very soon.

• increase the frequency of images in a flash animation

  Somehow I can adjust the cadence of a movieclip without affecting the frequency of images that I put for the rest of the document.

  I want to speed up this clip animation, and it would be difficult to adjust the calendar of this clip to achieve this.

  Thank you

  An example. I have a clip called movieclip on stage. This movieclip a stop() in frame 1. Below will play movieclip in double the speed of the stage frameRate and it runs in a loop.

  import flash.events.Event;
  
  addEventListener(Event.ENTER_FRAME, enterFrame);
  
  function enterFrame(e:Event):void {
      var targetFrame:uint = movieclip.currentFrame + 2;
      if(targetFrame > movieclip.totalFrames) targetFrame = 0;
      movieclip.gotoAndStop(targetFrame);
  }
  

• display of the work plan in real time for mobile devices?

  I do my design in illustrator before exporting all the assets for use in mobile applications. Is there a way to get the work plan to display on my mobile device in real time? As it is now, I have to save the artboard as an image and put it on my phone to see what it looks like.

  Hi Mike,.

  The answer would be 'no', at the present time. You are already one of the workarounds.

  Thank you

  OM

• adding RAM to mid-2011 will increase the speed?

  I have an imac 21.5-inch mid-2011 with the GM 4 pre-installed RAM.  It became slow as Christmas, commissioning.  I get the spinner to apple all the time now.  I have not used for some time and that he would buy a new one, but I guess I could increase memory first?  I'm so busy that I have not studied it.  I am relatively techno but always just bought last updated, bought a new macbook air, which I use, larger models with the max of RAM and recently a year ago but my eyesight is not so great and I want to go back to the imac at home.

  If you wish to post an etrecheck report here volunteers can get a better overview of your request.

  Thank you.

  http://etrecheck.com

• More RAM will increase the speed?

  Our iMac with an Intel Core 2 Duo 3.06 Ghz and 4 GB of RAM, running OS 10.10.5 slowed way. If both users are online, the second user account takes forever to initialize.

  We have two empty RAM slots and wonder if the additional RAM would ease the problem. Or do we need a newer, faster processor, which I assume means a new computer.

  Paul B.

  Hi Paul, more than RAM we're crazy. But I don't think it's the whole issue. Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• MacbookProOS Xv.10.6.8 Intel Core Duo will work ok using FF 39.0 Beta5. but it will increase the security issues with a 64bitupgrade?

  Cannot afford to upgrade now, but I'm afraid that it will be less safe because of the registration of 32-bit technology. Doesn't work perfectly, but I'm also sure that someone else for a few more months when I can afford to upgrade my computer, or I should I my guitar to the Hock joint and bite the bullet? Please help me. What Miss me in Geekiness I do to enjoy. Thank you

  I wouldn't worry about the use of a 32-bit Mac with Firefox.

  Firefox for Windows is still only 32-bit program, although the 64-bit versions of Firefox are developing for Windows again.

• I am running Windows 7 Ultimate 64-bit. Currently have 4 GB of RAM. I would switch to 16 GB of RAM. This will increase the performance of my computer?

  My husband tells me that Windows 7 supports only 4 GB of RAM maximum, but I don't think this is correct.
  Can someone help me please you without resorting to computer jargon.  A response in English would be more useful :)

  Hello

  Thanks for the reply.

  You can read these articles and check if that helps.

  Diagnosing memory problems on your computer: http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer

  Limits of memory for Windows versions: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx #physical_memory_limits_windows_7

  Usable memory may be less than the memory installed on Windows 7 computers: http://support.microsoft.com/kb/978610

  Let us know if you need assistance with any windows problem. We will be happy to help you.