reset the original spec desktop grid

Similar Questions

• You can reset the original settings iTunes to see the iphone as a new device?

  I have problems syncing my phone. I had encrypted backup files, and now I can't synchronize without entering the password. However, I forgot the password and I can't customize the sync function. Is there a way to fix this problem, or do I need to reinstall the software? I have reinstalled ITunes, but encryption is still there. Is there a way to restore the original default settings iTunes, where it sees my phone as a new device?

  Having this same issue, just wondering if you have any where and how?

• all in a desire to tilt 27: How can I find the original colors in my all in a single Windows 8.1 PRO

  I changed the colors and now they are not very clear and that you want to reset the original colors.

  Thanks in advance for helping me.

  Fernando

  Hello @fer_jin,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you want to change the colors on your desktop computer, and I'd be happy to help you in this case!

  To reset the original colors, I recommend that you follow the steps in this resource on the HP computers and monitors - change the appearance of Windows 8. If you are still not able to return the original to your computer colors, I suggest this document I recommend return your system to a previous restore point until you have changed the colours initially following. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 8).

  If the problem persists, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  I hope this helps!

  Concerning

• How can I get first remove additional background and restore the original proportions?

  I edited to 15 minutes of video in 1080 p, in the end, I added an image to the sequence in 3000 x 2000 that changed the resolution and the aspect ratio of all the elements of the project. Every single video or image has black bars on the sides. I tried exporting at 1080 p in any case, in the hope that it might cut the surplus, but he just resized the sides black 1080 p so half of the screen is black with a little video in the Center. Zoom in does not work because it is not reset the original proportions. Using the parameters of the sequence to cut away half of the image in 1080 p so that either doesn't work for me. Is there a way to remove and recover the videos of how they have been or have I just lost the last 5 hours?

  After a few hours of research just about anywhere I could think and swearing like a sailor, I managed to find a solution by myself. When you export the media, in the upper left corner, there are options to scale the videos and one of them fixed it for me. Suffice to say in case someone else is having the same problem.

• Do a right click on desktop freezes computer, Windows explore and Dr. Watson as time stop working. Only Ctrl + Alt + Delete can be used to reset the computer

  original title: right clicking on desktop freezes the computer, Windows explore and Dr. Watson times stop working.  Only Ctrl, Alt, Del to reset computer

  Make a right click on desktop freezes the computer.  Explorer Windows and Dr. Watson stop working. Only Ctrl, Alt, Del restarts computer

  Hi Ken1948,

  1. did you of recent changes on the computer?

  2. you receive the error message?

  3 when was the last time it was working fine?

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Cannot open the alias "Microsoft Remote Desktop" because the original item cannot be found.

  Running Mac OS 10.11.3. By clicking on "fix Alias... "does not set it. Afraid to click on "Delete the Alias" since I do not know where is the 'original '. I'm not good with computers, so if you have a solution, please explain as I am a child of 5 years. Thank you.

  Where are you clicking when yo get this message?

  First, look in your Applications folder and see if Microsoft Remote Desktop is here.

  Reinstall Microsoft Remote Desktop.

  https://iTunes.Apple.com/us/app/Microsoft-Remote-Desktop/id715768417?MT=12

• Graphical WPF reset the Axes of origin

  Hello

  Is there a way to reset a horizontal axis (0) originally?

  I already used ResetZoomPan(), but this only the definition panoramic and zoom to its original state.

  I would like to reset the chart as it appears from the first load.

  Thanks for all the help.

  Assuming that your chart is configured as in the example below:

  
        
          
        
        ...
      

  You can set the range using the element named axis:

  xAxis.Range = new Range(0.0, 10.0)

  Or by casting the first element of the Axes collection, if it is without name:

  ((Axis)graph.Axes[0]).Range = new Range(0.0, 10.0)

• I have a HP mediasmart server LX195. I want to do a Factory reset on this server. I don't have the original software CD.

  I have a HP mediasmart server LX195.   I want to do a Factory reset on this server.   Factory reset, I mean completely wiping the drive clean and reinstalling the software, like the LX195 server was brand new.   I don't have the original software CD.  Now, before you do a factory reset, I would need to back up my data.   I have a few questions.

  1. I don't have the original software CD LX195 where can I order the original game CD?

  2. is there a preparation I need to do in addition to save my data before I perform a complete reinstallation?

  3. What are the problems, if any, will I have to run by doing a complete reinstall the server LX195?

  Thank you.

  The link below for the guide on Factory Reset and server using HP recovery may be able to help -.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01691363&cc=us&DLC=en&LC=en&product=3941454

  EDIT: The above guide requires recovery disks.

  If you are in the United Kingdom, please visit http://www.mediasmarthome.com/forum/thread/12084/Need-a-little-help-recovery-CDs/#5876

• How can I start my XP desktop PC using the original CD of the Windows XP operating system, but I don't remember my password?

  The last time I asked a question like that, someone made it is perfectly clear that they would not help me to crack a password..., three times. If you have any suggestions that may help me in fact, I'd be in your debt. Otherwise, save your time and ignore all this.

  I am trying to perform a repair to the XP operating system. When I try to boot from the CD drive using the original Windows XP disc, I can not connect. It's a dead-end.

  When I try to boot from the hard drive, the system reaches a certain point, and then it re-boots. If I just sit and watch, it keeps re-initialization. Strange thing is that recently, I changed the password. I simply do not remember what it is. And, seriously, I have experienced repeated amnesia episodes. The obvious thing to do is to keep my own hand written records..., I only using computers since 1982, before IBM introduced its first PC.

  The BIOS provides a way to clean up all the stored passwords? This is where I'm going next.

  I apologize for being a little rough. Part of that comes with age.

  Jeff

  Hello, Jeffrey. I just read one of your other threads. Brian Tillman brings a great point that you missed. The BIOS password (if it still exists) has absolutely NOTHING to do with the other passwords, including those for things like a Windows XP profile.

  Unless you have created passwords, while they do not exist. So, if you need to boot from the Windows CD using the Recovery Console, and you are prompted for a password, then chances are that just by pressing the Enter key (indicating an 'empty' or empty password) is all you need to do.

  So, if I were you, I would not at all concerned about your BIOS.

  In addition, I think you mentioned that you couldn't even see the administrator account. Assuming you have Windows XP Home Edition, this is how it is supposed to be. If you want to see it, you will need boot mode safe. Then you will see. :-)

  If you DID create a password and have no idea of what it is, there are tools to reset your password. But I think that people don't post links to these programs in these forums Microsoft (not very well why). But they are easy to find if you use a search engine.

  You say that you have recently changed a password, but you did not indicate what it was for. It is important to understand that the built-in Administrator account is NOT the same as another account that you are using happens to have administrator privileges. And assuming that you never set a password for the built-in Administrator account, so if you are using the Recovery Console, everything you need to do is press the Enter key.

  HTH.

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my desktop icons are changed and does not directly but opening in the location of the original file.

  original title: my desktop icons are changed and does not directly but opening in the location of the original file. So how do you restore originally propertities of the desktop icons

  Mr President, due to changes attributed to the icons of the office by my children, my desktop icons are changed and does not directly open, but they are open in the location of the original file. So how do you restore originally propertities of the desktop icons

  Thank you.

  Hello

  I suggest you follow the steps mentioned below.

  Method 1: Run the Fix - it.

  Follow the link below and run the Fix - it and check if it helps.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Run a sfc scan.

  Follow the link below and check the resulting errors.

  http://support.Microsoft.com/kb/929833

  Method 3: Perform a system restore.

  Follow the link below and perform a restore of the system to a point before, when the system was working fine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  It will be useful.

• Reset of the original fonts fonts folder/recovery

  I was wondering if there is a recovery tool for the default fonts in Vista? I downloaded a bunch of fonts and now I have over 2000 fonts and it's really out of the hand trying to go through them (slows all, essentially). I googled everything that I could think of to try to recover or reset the file, but there is nothing clearly elsewhere. Help?

  None containing the original set of fonts that came with Vista.  You can check to see what is available on the Microsoft Download Center at http://www.microsoft.com/downloads/en/default.aspx and entry policies.  There is not much choice for Vista only - mostly have to do with the other operating systems or of Microsoft Products (and none is what you are looking for).  I don't see ANY original font sets for any operating system available yet (they once were for some older systems, but they stopped doing that years ago).

  For what you want, check the results of research of Bing here: http://www.bing.com/search?q=Microsoft+fonts+download&mkt=en-us&DI=6244&CE=14.0&CM=SearchWeb&first=1&FORM=PERE.  I have found no who are the original Vista fonts (and I don't know how to properly remove installed fonts to only replace the originals, even if you were able to find them).  If you really find them, post with the link to this site and I'll see if I can understand how do now that we have replacements available.  But the sad truth is that these other policies are likely to space to the top of your policies even more than they already are if add you them to the mixture.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get the original icon HP Quick Launch (NOT the shortcut!) on my DESKTOP?

  I have a HP 2000 t - 2d 00 Notebook PC with operating system Windows 8.1.  The computer was recently repaired, but when I bought it, it had initially provided with HP Quick Start icon (square blue tile - like appearance with the rocket / is NOT a shortcut with an arrow inside!)

  Once it has been repaired, the original official HP QuickStart icon was on the desk.

  However, something happened, I have no idea what (!), and the original official HP QuickStart icon disappeared from the desktop!

  I would be very happy if someone could tell me how to get the original icon HP Quick Start (blue tile in appearance as square with the rocket) on my desk.

  I don't want a shortcut; I know how to create a shortcut!  I am certainly difficult and would like to have some things on the desktop exactly the way they were when I came to the computer.

  Thank you very much to all those who can help me.

  You missed my questions in my first reply to your message!  The link you provided for the program that can get rid of the arrows on the desktop shortcut icons does not have audio, or am I missing something?

  And since you said I could try a system restore before that the icon has been "modified" - does this mean that the original icon, when I got the computer brand new, * has * indeed an icon for HP Quick Launch / is NOT a shortcut?

  Thank you.

  Great-tree Deku wrote:

  Hey @BJ22 ,

  Welcome to the HP Forums!

  I understand you are trying to add the quick launch of HP on the desktop of your laptop.

  The icons on the desktop for programs preinstalled by HP are actually shortcuts. The executable file can be moved from its installed location without breaking the connection to the .dll for the software files.

  If the arrow bothers you, you can use this light application to remove the arrows from shortcut icons: Windows shortcut arrow editor.

  You can also try to restore until the icon has been changed. Using Microsoft System Restore (Windows 8).

  I hope that it is a viable solution for you.

• DV7-7240US: HP Recovery - cannot reset to the original factory HP setting

  Recently, my original Windows 8 has been updated to a new version of Windows 8.1. It was an automatic update of my laptop, I didn't. The next day, I discovered that the system was very slow and freezes in some places. I can not even restart or shut down the computer. It forced me to press and hold the power button to stop and restart the machine. It took some time for my machine load and start the window; Sometimes, it took about 30-40 minutes. This incident has happened very frequently, I have to turn the machine on too often. Now, I got the message when he was loading: diagnostic Systems, error disc, press the auto repair. "Then he started scanning it says on the screen: ' disk scanning error. This process may take longer than an hour. "He was allowed to return to 8.1 Windows for the first time. Then, the windows was frozen again. I forced to turn off and turn on the machine too many times, this machine was hooked during the scan disk error. He showed the scanning process 0% throughout the night I left the machine. I can't load the window again. Therefore, I have to go to the F11-system setting, keyboard language was loaded on the screen. Then I chose us. The next screen, I clicked on troubleshooting, HP Recovery, restore the system. It did not work. Then, I selected Reset to the original factory setting. He asked to make a backup of the file. I chose the automatic backup of the file, and then move forward. The backup process has crossed at 63%, then the pop-up error: error ffffffff15, data code = 6. I tried to go back and backup file again, it gave me the same error. Then, I tried to reset the system to the initial factory setting without saving the file. I clicked on the warning message about all of the hard drive will remove if I proceed. Then I got an error and can not proceed with other measures. I then tried to reset the systems with USB I created HP Recovery Manager after buying the machine. "When I tried to restore the initial factory setting, it gave me an error message:" the target drive is not connected. "I don't know what to do now. I guess, I need HP Recovery DVD or HP's USB flash drive in order to restore the factory setting of windows 8. I don't have the recovery disk when I bought my HP laptop. I even created one with USB, copy of the record of HP recovery support, but it still doesn't work. Help, please! It's really frustrating.

  Yes, you got the error code indicates a bad hard drive.

• Recently accidentally set pdf Converter (architect), as the default program, how to reset to original settings

  Original title: default icon

  HI I need help I recently accidentally set pdf Converter (architect) as the default program how to reset to original setting the cheers.

  Right-click the icon of the file for the program

  Click on properties

  On the general tab, click on change

  Select the program, and then click on apply and OK