Reset the popup when closed

Similar Questions

• Satellite T130-15F - can still hear the click when closed

  If my keyboard is broken and he is sent back, but I'm not sure if I want this replacement. :(

  Speed is great, the style is excellent and very nice in general, but my biggest problem is the mouse click. When the laptop is closed / stop, and when it's in my bag, I can hear it clicking with the slightest pressure applied in the field of the mouse. So I wondering if anyone would be so kind to let me know if there is a problem of toshiba on all their Satellite T130 or if I just managed to get a dodgy version.
  If you have one, could you I please try :)

  Seems stronger on the RIGHT side, only had it two days so. Could be 'break', but it becomes a much more difficult to hear on the LHS, but RHS is very very annoying.

  Hope that makes sense, :D
  Help really appreciated.
  Thank you
  Will be

  Hey

  In my opinion you should tell the guys from authorized service provider. I put t know which clicks you mean exactly, but I think that it s not a normal behavior.

  I have the Satellite T110 similar to yours and it of working great! I could not notice any problems, everything works fine. It s really great notebook series from Toshiba and especially for mobile use. :)

• Reset the BIOS when there is no jumpers

  My Compaq Presario SR1050NX freezes on the BIOS boot screen. It looks exactly like this request:

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/computer-will-not-boot-past-BIOS-screen-C...

  When the start screen comes on, I have a few seconds in which the buttins nin lock and caps lock on the keyboard will activate the lights on the keyboard. I also CAN press the F1 key and says "Enter Setup" but freezes immediately.

  One problem is the motherboard has labels for three riders, but one is missing. They say "Clear password" they say "Clear battery" and a "Clear CMOS". However, the last one doesn't have the pins of the jumper on the Board; the pins are missing. What I have to use a paperclip to connect these dots on the motherboard or the pins are not there because it other ways to try to reset the BIOS. The Council has two memory sticks, and I removed each, one at a time without result.

  HE used the jumper "reset battery" and it seemed to do. I think the VGA cable may have been loose and with the power of connected monitor to the VGA connector, which could have the problem.

  Kevin

• How to reset the content when switching between tabs

  My use case, is that I have all of the multiple tabs displayed in the sidebar. The content of the tabs each has a title bar of free-form which is scalable. If lets say on tab 1, the title bar is developed, and then when you go to the tab 2, is it possible the collapse of the State of the title bar in tab 1 expanded. Or when you switch to tab 1, is it possible to reset the State of the title bar - meaning collapsed.

  I tried all possible solutions, such as the resetExpanded() or use of the definition of the extended property to false dynamically but no work.

  The only thing working is while I'm in tab 1, I develop the title bar while in the same tab, if I perform any other action, I could run resetExpanded() but that's it. Outside tab 1, as in the QML who has the tabbed pane, listening to side bar changed state events, events to change active tab etc., none to take effect.

  There is no ID for the expandableArea so I couldn't get to the extended property that I could create an Alias for.

  Also the unique ID that gets me access to the resetExpanded() is the ID of the

  FreeFormTitleBarKindProperties, and that's how I'm able to do the

  ID.expandableArea.resetExpanded () BUT that I couldn't create an Alias for this FreeFormTitleBarKindProperties because it is not to be an alias of an identifier is valid.

  So I don't know how to solve this problem, unless there is a way to destroy the contents of the tab whenever I switch to a different tab, but it is very inefficeint and suffers poor performance.

  Any ideas anyone how to solve this problem. Appreciate your help.

  Finally, I was able to solve it!

  Originally I had the game content tab statically at the beginning in the tab "as

  Before:

  Tab {}

  {somePage}

  }

  }

  After:

  Now, I created somePage using ComponentDefinition and assigined the content of the tab as

  tabbedPane.content = somePage, followed by all the properties of customization that I send to somePage

  Now in TabbedPane, I listen to two events below

  onActiveTabChanged: {}

  resetTabContent();

  }

  onSidebarVisualStateChanged: {}

  resetTabContent();

  }

  resetTabContent - calls the function

  function resetTabContent() {}

  mainPane.activeTab.content.resetDropDown ();

  }

  The resetDropDown() function is globally on all aspects for the TabbedPane

  {functionresetAccountsDropDown()}

  contentArea.expandableArea.resetExpanded ();

  }

  where contentArea is the ID of the kindProperties of the title bar

  {Page}

  title bar: title {} bar

  ID: pageTitle

  scrollBehavior: TitleBarScrollBehavior.Sticky

  type: TitleBarKind.FreeForm

  kindProperties: {FreeFormTitleBarKindProperties}

  ID: accountsArea

  {Of container

  }

  {expandableArea}

  }

  }

  }

  }

  Enjoy!

• Show the popup when the selection is made on SelectOneChoice

  Hello genius!
  I'm back with another question. = D
  With the help of Jdeveloper 11 g Release 1.
  
  I'm showing a popup when a value is selected on a selectOneChoice component. I tried to use showPopupBehavior, but it looks like you can use that on a selectOneChoice... it works of course if I have a button, but I want to get rid of the button and just show popup when a selection is made on the selectOneChoice.
  
  Suggestions, ideas?

  Hello

  (1) set autoSubmit = true for the SelectOneChoice element, then create a method of valueChangeListener for the selectOneChoice.
  (2) in the valueChangeListener method, the popup can be demonstrated using the examples
  http://www.adftips.com/2010/10/ADF-UI-popuputil-class-to-show-or-hide.html

  Thank you
  Nini

• the old version would save the tabs when closing, how can I get the new version to do the same thing?

  the previous version would ask something like "save the file" when I would close firefox. as I use different tabs, it is a very useful feature for me. I want to get this same functionality on the new version, if I want to know how to go back to the old version.

  Thank you

  Firefox stores now always the old session, and you can access it by going to the history menu and selecting "restore previous Session."

  If you want Firefox to display the message to save the session, it can be turned on again by changing some preferences.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Find browser.tabs.warnOnClosepreference, if its value is set to false, double-click on it to change its value to true
  4. Repeat this for 3 preferences browser.warnOnQuit, the browser.warnOnRestart and the browser.showQuitWarning

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• How to reset the options when you enter a disc in the drive.

  Apparently, I put the options in the window when I insert a disc to be permanent.  How to return to default values?

  Hello
  Welcome to the HP Forum!

  pappy444 wrote:

  Apparently, I put the options in the window when I insert a disc to be permanent.  How to return to default values?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Do not post not the serial number of your product because it is personal information. ###
  
  Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

  What specific drive you are talking about the State. Do you mean an optical drive such as a CD or a DVD?

  If you use Windows 7 or Vista:

  Click the Windows Orb and in the search box, type autoplay.

  Above, you will see the option change the defaults for the media or devices. Select it.

  Now, you can choose the default actions you want to happen with devices and media. Once you have chosen don't forget to click on save.

  

  Best regards

  ERICO

• reset the slides when the user goes back to the slides...

  Hello

  I need to make sure that each slide, if users goes by using our back button, slide resets the same as if oyu see it for the first time...

  I'm picking this will be an action point, but not sure...?

  See you soon
  Sabine

  Go to Quiz > Quiz preferences > success or failure > if lack of rank > allow the user and define attempts something higher to 1.

  You will see then the check box show the button resume.

• Rollover image set to appear for the rest of the problem of the project when closing and returning 1/2 way through

  I have a set rollover image to appear to the rest of the project which works fine if all of the training is done at the same time. The project is in adobe connect and the project of closing and then reinsert the project, it will take off where the user left off but this rollover image appears on the screen instead of the current slide. The user should click on in the Table of contents or a front/rear button to turnover to go. Is there a way I can fix it so the rollover image is not back to the project?

  Have you tried to put the image rollover on Master slides in place?

• Warn me when closing multiple tabs is not checked, but I still get the warning when closing multiple tabs

  After installing Firefox 16.0.1, I always get a warning whenever I close many tabs, even if there is no check box against the option "notify me of closing multiple tabs".

  Hello unfortunately at the moment it is not possible to turn off the warning that appears when you select "Close other tabs" due to a side effect by an another bug fix.
  in firefox, 18 there will be an added preference in about: config (browser.tabs.warnOnCloseOtherTabs) which allows to hide the caveat again, see bug #772319.

• reset the timestamp when event due

  Hello

  I have an event of this handel button 4 and timeout block draw graphic online with clock and date on axis X

  everything is ok, but when I press a button and event reset to 1994 accuerd tme...

  Why?

  my code here... I have read the information of some global var (as an attachment)

  Please help me to solve this problem

  Thank you.

  Hi meysam_b,

  You must connect through all data in all cases if structure.

  

  Repeat this for all the wires passing through a shift register.

  The quick way to do this is to connect the tunnels. Right-click in the output terminal, then use menu related entrance Tunnel to a link. As soon as you click on create and wire Unwired case simply click on the tunel associated entry and LabVIEW will automatically create links to you.

  

  This should fix the time stamp of rearmament.

• Reset the workspace when switching between laptop and external monitor

  Is there a way to have my work space reset itself (or better yet change between two workspaces) when I pass between my laptop and my external monitor to my office. Adobe likes to crush my workspace in a sea of useless, mutilated pallets when I leave my office. There at least had the kindness to put it when I get back.

  I realize I can manually reset and I even put in place a combination of keys, but I don't see why he can't do it on its own. Or better yet, stop blend it upward in the first place.

  Unfortunately, I think it's an OS and PS reacts only to have to resize it to another monitor.

• virtual machine resets the time when restarting

  When we recharge our virtual machine on VMWare server - it resets its time back several hours until that VMWare tools to sync w / the host time.  It's ruining ravages w / local services that cannot start with the time domain/workstation out of sync.

  Any suggestions?

  It would be for the ESXi host.   You can configure in the VI client by going to Configuration-time Configuration.

• Last line of text missing in the popup when it is generated

  Hi all

  We are experiencing a strange problem where the last line of text in any subject that appears in a pop-up window to another topic is missing (not shown). However, if you view the topic in a normal browser window, the last line of the text is present. It happened not in earlier versions of RoboHelp; only 8 HR. If someone has encountered this problem, and if so, could you address them and how?

  In all of our subjects, the last line of the text is a footer with a Disclaimer Privacy and "and the" current date. I noticed that in any topic that was connected via popup with another topic, RoboHelp adds a strange between the closing tag < /p > script of this line and the closing < / body > and < / html > tags. This script could be causing the problem? An example script is pasted at the bottom of this message.

  I appreciate any assistance! My system information is listed below. Let me know if you need further information.

  Many thanks in advance,

  Lisa

  RoboHelp HTML version 8.0.2.208

  Output type: WebHelp

  Source control: Microsoft Visual SourceSafe 8.0.50727.42

  <? HR-script_start? > < script type = "text/javascript" language = "JavaScript1.2" > / / <! [CDATA]
  If (typeof (TextPopupInit)! = 'function') TextPopupInit = new Function();
  If (typeof (FilePopupInit)! = 'function') FilePopupInit = new Function();
  TextPopupInit ('a9', 'POPUP379827639');
  FilePopupInit ('a5');
  FilePopupInit ('a6');
  TextPopupInit ('a3', 'POPUP382536905');
  TextPopupInit ('a8', 'POPUP389987027');
  FilePopupInit ('a1');
  FilePopupInit ('a14');
  TextPopupInit ('a15', 'POPUP387795029');
  TextPopupInit ('a4', 'POPUP386495466');
  TextPopupInit ('a11', 'POPUP388870525');
  TextPopupInit ('a13', 'POPUP387792022');
  FilePopupInit ('a12');
  TextPopupInit ('a2', 'POPUP410568235');
  FilePopupInit ('a16');
  TextPopupInit ('a10', 'POPUP386843632');
  TextPopupInit ('a7', 'POPUP388085251');
  []] > < / script > <? HR-script_end? >

  See section 20.

  http://www.Grainge.org/pages/authoring/RH8/using_rh8.htm

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Clsing Firfox 4. -for Yahoo does not save the tabs when closing like the previous versions. Your help says settings but does not tell me what setting...

  In all previous versions of Firefox, when I close Firefox, asked me if I wanted to save my tabs. The latest version does not have this option. Why not and what adjustment will bring back this feature. I don't have to pull down the menu history and ask the previous Session, I should be able to start with my previous session if I exit and not to close tabs.

  Updates should increase the functionality and NOT completely change the appearance of the program.

  Thank you

  "I asked also originally where the setting was to open Firefox with my previous tabs."

  I do not see that in your original question, above. I have provided an answer to this question in my second reply:

  • You can set this option in the Options > general change, "when Firefox opens:" to "show my windows and tabs from last time '.

  "If you receive a number of issues, I think that you and your partners might inform Mozilla user base concerns."

  1. It is not our function in his presence.
  2. You can send comments (comment box very limited; ( there will be no response to you to submit your comments) : help > submit your comments
  3. You can also make comments to the following address (there is no answer to you from the following link, more space of commentary available on this link): http://hendrix.mozilla.org/

  If the foregoing has answered your questions, please take a few minutes to return to the forum, connect and click 'Resolved' next to the answer that solves your problem of Firefox support, so that other users can find answers that have worked to solve problems. Thank you.