reset the timestamp when event due

Similar Questions

• How to reset the content when switching between tabs

  My use case, is that I have all of the multiple tabs displayed in the sidebar. The content of the tabs each has a title bar of free-form which is scalable. If lets say on tab 1, the title bar is developed, and then when you go to the tab 2, is it possible the collapse of the State of the title bar in tab 1 expanded. Or when you switch to tab 1, is it possible to reset the State of the title bar - meaning collapsed.

  I tried all possible solutions, such as the resetExpanded() or use of the definition of the extended property to false dynamically but no work.

  The only thing working is while I'm in tab 1, I develop the title bar while in the same tab, if I perform any other action, I could run resetExpanded() but that's it. Outside tab 1, as in the QML who has the tabbed pane, listening to side bar changed state events, events to change active tab etc., none to take effect.

  There is no ID for the expandableArea so I couldn't get to the extended property that I could create an Alias for.

  Also the unique ID that gets me access to the resetExpanded() is the ID of the

  FreeFormTitleBarKindProperties, and that's how I'm able to do the

  ID.expandableArea.resetExpanded () BUT that I couldn't create an Alias for this FreeFormTitleBarKindProperties because it is not to be an alias of an identifier is valid.

  So I don't know how to solve this problem, unless there is a way to destroy the contents of the tab whenever I switch to a different tab, but it is very inefficeint and suffers poor performance.

  Any ideas anyone how to solve this problem. Appreciate your help.

  Finally, I was able to solve it!

  Originally I had the game content tab statically at the beginning in the tab "as

  Before:

  Tab {}

  {somePage}

  }

  }

  After:

  Now, I created somePage using ComponentDefinition and assigined the content of the tab as

  tabbedPane.content = somePage, followed by all the properties of customization that I send to somePage

  Now in TabbedPane, I listen to two events below

  onActiveTabChanged: {}

  resetTabContent();

  }

  onSidebarVisualStateChanged: {}

  resetTabContent();

  }

  resetTabContent - calls the function

  function resetTabContent() {}

  mainPane.activeTab.content.resetDropDown ();

  }

  The resetDropDown() function is globally on all aspects for the TabbedPane

  {functionresetAccountsDropDown()}

  contentArea.expandableArea.resetExpanded ();

  }

  where contentArea is the ID of the kindProperties of the title bar

  {Page}

  title bar: title {} bar

  ID: pageTitle

  scrollBehavior: TitleBarScrollBehavior.Sticky

  type: TitleBarKind.FreeForm

  kindProperties: {FreeFormTitleBarKindProperties}

  ID: accountsArea

  {Of container

  }

  {expandableArea}

  }

  }

  }

  }

  Enjoy!

• Reset the BIOS when there is no jumpers

  My Compaq Presario SR1050NX freezes on the BIOS boot screen. It looks exactly like this request:

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/computer-will-not-boot-past-BIOS-screen-C...

  When the start screen comes on, I have a few seconds in which the buttins nin lock and caps lock on the keyboard will activate the lights on the keyboard. I also CAN press the F1 key and says "Enter Setup" but freezes immediately.

  One problem is the motherboard has labels for three riders, but one is missing. They say "Clear password" they say "Clear battery" and a "Clear CMOS". However, the last one doesn't have the pins of the jumper on the Board; the pins are missing. What I have to use a paperclip to connect these dots on the motherboard or the pins are not there because it other ways to try to reset the BIOS. The Council has two memory sticks, and I removed each, one at a time without result.

  HE used the jumper "reset battery" and it seemed to do. I think the VGA cable may have been loose and with the power of connected monitor to the VGA connector, which could have the problem.

  Kevin

• Reset the popup when closed

  I'm new to adf and am facing a problem in pop - up implementation. I have a few fields in popup to insert into a database. When the insert is complete and the pop up is closed, it keeps all values when the popup is open again. How can I clear or reset the values of the fields when I close the pop-up window. I put in delivery of content to "lazy QUERIES.

  well... is that you have taken the approach that I said?

  ~ Abhijit

• How to reset the options when you enter a disc in the drive.

  Apparently, I put the options in the window when I insert a disc to be permanent.  How to return to default values?

  Hello
  Welcome to the HP Forum!

  pappy444 wrote:

  Apparently, I put the options in the window when I insert a disc to be permanent.  How to return to default values?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Do not post not the serial number of your product because it is personal information. ###
  
  Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

  What specific drive you are talking about the State. Do you mean an optical drive such as a CD or a DVD?

  If you use Windows 7 or Vista:

  Click the Windows Orb and in the search box, type autoplay.

  Above, you will see the option change the defaults for the media or devices. Select it.

  Now, you can choose the default actions you want to happen with devices and media. Once you have chosen don't forget to click on save.

  

  Best regards

  ERICO

• reset the slides when the user goes back to the slides...

  Hello

  I need to make sure that each slide, if users goes by using our back button, slide resets the same as if oyu see it for the first time...

  I'm picking this will be an action point, but not sure...?

  See you soon
  Sabine

  Go to Quiz > Quiz preferences > success or failure > if lack of rank > allow the user and define attempts something higher to 1.

  You will see then the check box show the button resume.

• Use the timestamp when another cell contains one of two values

  Hi everyone again,

  I am struggling with a formula more in number. I have a formula whose time stamps the current date in a cell when a corresponding cell in the map is filled with '1 '.

  =IF(C3=1,TODAY,"")
  

  Hey Joe,

  IF and WHERE are your friends.

  

  Formula in D3 (fill down)

  = IF (OR (C3 = 1, C3 = "G"), TODAY (),"" ")

  Today is dynamic; It is not a timestamp.

  If you open the document tomorrow, it will be a new today (July 23, 2016, at least in Australia).

  Do you want a real timestamp (scheduled) or a dynamic date?

  Kind regards

  Ian.

• How to add sounds to the light icons in the taskbar when events happening?

  Well, my question is maybe very simple, I hope I can get help here, I ve been wondering how to make the icons on the taskbar sound when something happens for example when you receive a message 'Skype', the light of the task bar, but in my case they do not all sound the answer to that might be in the Skype settings, but, I want is doing the actual windows to make a sound to tell me something that is happening there, and of course I can chose the sound of that.

  the example of "Skype" might not be the best here, lets say another software, when is reduced and something happens, call your attention to the icon in the taskbar with start to glow, but sometimes I'm in another place, or looking for another way I could not miss this event in this software need my immediately attention with sound, I could turn on my loud speakers so I will be heard.

  Thank you

  Hello Derwyn,

  Thank you for your response.

  I appreciate your time and your concern.

  Unfortunately, the desired Windows sound is not included in the Windows sound scheme.

  However, in the article in the previous post on changing the sounds of the computer, you can see under the heading 'Windows Explorer' under the window 'events of the program'inside'sound'. You can find the other sounds of Windows Explorer as blocked pop-up navigation block, empty, trash, move menu items and so on.

  Thank you

• Reset the workspace when switching between laptop and external monitor

  Is there a way to have my work space reset itself (or better yet change between two workspaces) when I pass between my laptop and my external monitor to my office. Adobe likes to crush my workspace in a sea of useless, mutilated pallets when I leave my office. There at least had the kindness to put it when I get back.

  I realize I can manually reset and I even put in place a combination of keys, but I don't see why he can't do it on its own. Or better yet, stop blend it upward in the first place.

  Unfortunately, I think it's an OS and PS reacts only to have to resize it to another monitor.

• virtual machine resets the time when restarting

  When we recharge our virtual machine on VMWare server - it resets its time back several hours until that VMWare tools to sync w / the host time.  It's ruining ravages w / local services that cannot start with the time domain/workstation out of sync.

  Any suggestions?

  It would be for the ESXi host.   You can configure in the VI client by going to Configuration-time Configuration.

• How to reset the password when locked

  My sister just got an iPhone 6 and she has a password and then locked her self because she forgot the password.

  How do reset us the phone.

• Look for the timestamp when the file is moved

  I want to find when my file is moved from one folder to another folder with in the same drive. Suppose I have a text file and I just cut this file to a folder and paste to another folder, but in the same drive then I see that none of the date changes i.e. Date_created, date_de_modification, Date_Accessed. Could any body tell me how can I identify when the file is moved from one place to the other place.

  Can anyone help please as it is necessary in an emergency.

  Thanks in advance!

  I suggest you do this:

  1. Change the first two lines of the script more far down to suit your needs.
  2. Save the script as Filemonitor.vbs in an appropriate place.
  3. Invoke the script from a command prompt. He will continue to run in the background until you press Ctrl + C.
  4. Add a file in the target folder. Within 10 seconds, you should see the output in the log file.
  5. Add the name of the script to your startup or logon script so that it runs automatically.

  sTargetFolder = "D:\Test."
  sLogfile = "D:\Log.txt".

  Set OFSO = CreateObject ("Scripting.Filesystemobject")
  «sFldr = "" "" & Replace (sTargetFolder, "-","-") & "»
  Set oWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
  Set cMonitoredEvents = oWMIService.ExecNotificationQuery _
  ("SELECT * FROM __InstanceCreationEvent WITHIN 10 WHERE" _)
  & "Targetinstance ISA"CIM_DirectoryContainsFile"and"_ ".
  (& ' TargetInstance.GroupComponent ='Win32_Directory.Name = "& sFldr &" ' ")
  Do
  Set oLatestEvent = cMonitoredEvents.NextEvent
  Set oLog = oFSO.OpenTextFile (sLogfile, 8, True)
  oLog.WriteLine Date() & "" & time & "" & Replace (oLatestEvent.TargetInstance.PartComponent, "-","-" "")
  oLog.Close
  Loop

• a date column, with timestamp... How to remove the timestamp

  Hello
  
  I have a table name WRESTLING, with one of its fieldnamed DATE, using the DATE data type.
  The date format incudes timestamp, can someone help me how to remove the timestamp part.
  I want only the part of date only. I tried this:
  
  Update DATE is to_char(date,'DD-MON-YYYY') set of CATCH;.
  but the result of all the date inside the table always have timestamp.
  
  can I use this:
  Update DATE is to_date(date,'DD-MON-YYYY') set of CATCH;.
  and still the same result.
  
  Can anyone advice on this? pls.
  Thank you

  user9353110 wrote:
  Thank you very much.. If this is the case, we can remove the timestamp when creating view for this table?

  No, you can never remove the component "hour" of a DATE.

  If you do not want to display a date in time (display purposes only!), use TO_CHAR to "transform" the DATE to a string with the format mask

  SQL> alter session set nls_date_format = 'dd-mm-yyyy hh24:mi'
    2  /
  
  Session altered.
  
  SQL> select sysdate
    2    from dual
    3  /
  
  SYSDATE
  ----------------
  17-03-2010 09:28
  
  SQL> select to_char (sysdate, 'dd-Mon-yyyy')
    2    from dual
    3  /
  
  TO_CHAR(SYSDATE,'
  -----------------
  17-Mar-2010
  
  SQL> select to_char (sysdate, 'yyyy-MON-dd')
    2    from dual
    3  /
  
  TO_CHAR(SYSDATE,'
  -----------------
  2010-MAR-17
  
  SQL> 
  

  NOTE: the example of last two are not DATEs! They are STRING

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• reset the timer using a structure of the event

  I wrote a simple code to count the second and the timer can be reset if I press the button "reset".

  It works; However, there are two problems,

  1. when I run the program, the timer takes 1 second to start

  2 when I press the reset button, the timer also takes a second to answer

  I think it's the 1000ms that is connected to the left corner of the structure of the event. Is there a better way to overcome this problem? (the timer starts and resets immediately

  When I launch the program and press the "reset" button)

  Thank you!!

  Dear ivy037

  You can make the time outside the structure of the event as in the attached code.  I would like to know if this is satisfactory.

  Thank you