Reset the workspace when switching between laptop and external monitor

Similar Questions

• How to reset the content when switching between tabs

  My use case, is that I have all of the multiple tabs displayed in the sidebar. The content of the tabs each has a title bar of free-form which is scalable. If lets say on tab 1, the title bar is developed, and then when you go to the tab 2, is it possible the collapse of the State of the title bar in tab 1 expanded. Or when you switch to tab 1, is it possible to reset the State of the title bar - meaning collapsed.

  I tried all possible solutions, such as the resetExpanded() or use of the definition of the extended property to false dynamically but no work.

  The only thing working is while I'm in tab 1, I develop the title bar while in the same tab, if I perform any other action, I could run resetExpanded() but that's it. Outside tab 1, as in the QML who has the tabbed pane, listening to side bar changed state events, events to change active tab etc., none to take effect.

  There is no ID for the expandableArea so I couldn't get to the extended property that I could create an Alias for.

  Also the unique ID that gets me access to the resetExpanded() is the ID of the

  FreeFormTitleBarKindProperties, and that's how I'm able to do the

  ID.expandableArea.resetExpanded () BUT that I couldn't create an Alias for this FreeFormTitleBarKindProperties because it is not to be an alias of an identifier is valid.

  So I don't know how to solve this problem, unless there is a way to destroy the contents of the tab whenever I switch to a different tab, but it is very inefficeint and suffers poor performance.

  Any ideas anyone how to solve this problem. Appreciate your help.

  Finally, I was able to solve it!

  Originally I had the game content tab statically at the beginning in the tab "as

  Before:

  Tab {}

  {somePage}

  }

  }

  After:

  Now, I created somePage using ComponentDefinition and assigined the content of the tab as

  tabbedPane.content = somePage, followed by all the properties of customization that I send to somePage

  Now in TabbedPane, I listen to two events below

  onActiveTabChanged: {}

  resetTabContent();

  }

  onSidebarVisualStateChanged: {}

  resetTabContent();

  }

  resetTabContent - calls the function

  function resetTabContent() {}

  mainPane.activeTab.content.resetDropDown ();

  }

  The resetDropDown() function is globally on all aspects for the TabbedPane

  {functionresetAccountsDropDown()}

  contentArea.expandableArea.resetExpanded ();

  }

  where contentArea is the ID of the kindProperties of the title bar

  {Page}

  title bar: title {} bar

  ID: pageTitle

  scrollBehavior: TitleBarScrollBehavior.Sticky

  type: TitleBarKind.FreeForm

  kindProperties: {FreeFormTitleBarKindProperties}

  ID: accountsArea

  {Of container

  }

  {expandableArea}

  }

  }

  }

  }

  Enjoy!

• Trails of the icon when switching between desktops in the Sierra

  I noticed some display problems since the update for Sierra. I see some trails icon when switching between desktop computers as well as a line of 1px of random colors on the right side of the screen seems to be leftover pixels for the desktop switch as well.

  Here is a screenshot: https://cl.ly/hegc

  Here is a video showing the paths of the icon: https://cl.ly/hef9

  Any other light this or know how to fix? It's rather annoying.

  Thanks in advance,

  Brent

  Hello Brent Spore.

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep your Mac running properly, and I want to help him.  Whenever we see the behavior as what you described, it is a good idea to test the symptoms in a separate user in safe mode. This will help us determine if the remanence of the icon is linked to a problem with the user account or if it's a question broad system. The articles below will guide you through these steps.

  How to test a question in another account on your Mac.

  Try safe mode if your Mac does not end commissioning

  If the ghost still occurs in safe mode, then we know it is a question broad system and I would recommend backup your Mac and Mac OS re-install using recovery, as described in the articles below:
  

  Use Time Machine to back up or restore your Mac

  How do I reinstall macOS

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.

  Best regards.

• Rearrange the spaces when switching between applications

  When switching between apps spaces can reorganize, which is disturbing for users with specific workflows. For example, right now I have 6 places with different applications in each, and I have these in a specific order. However, since upgrading to El Capitan, I find continues to reorganize themselves. I can reproduce this by opting for an application by opening a window in a non adjacent space. For example, I have a window open in 4-space and I am consulting a window in space 1. If I pass this request, space 4 will be moved to position 2. It always seems to move space to the next position to the right of the current space. I can reproduce this reliable either by opting for an application by using cmd - tab, or if I have multiple windows for a single application running in more than one space, using app expose.

  Djroshi,

  My office reorganise themselves once the screen saver is running can provide you with some tips to change this behavior.

  

• Resolution of screen changes back back when switch between Yosemite and Fusion 7

  Upgrade to Yosemite on my MacBook Pro has forced me to also upgrade to Fusion 5, who had been very stable and problem free. Unfortunately, I knew a behavior very boring to the resolution of the screen in my virtual session of Windows 7, when I toggle between Yosemite and the virtual partition of Windows 7. Any time that make a screen resolution change and change over on the side of Yosemite, when I return to Windows 7, the resolution returns to the default setting of 2880 X 1800, which requires a magnifying glass to see! Does anyone else know this? I couldn't find a thread discussing this problem, but I know that yosemite is new.

  In addition, since it is clearly a bug, can someone tell me the best way to report it to VMWare? I'm sure they want to know about the bugs, but I don't know the best way to report them. They were very helpful when I discovered how hard this upgrade to Yosemite before checking to see Fusion 5 was consistent (if not) was a mistake on my part - they got me on track, and even if it's a bear to learn how to get a live person on the line with VMWare site Once I did, I finally got a guy who nailed - Kudos to their technical support for this team.

  Glenn

  Hello Glenn

  Try to disable the support of the retina by going to

  1. Virtual Machine menu > settings > display. Uncheck the use full resolution over Retina display.

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.

• AFX freezes for 5 seconds when switching between first and AFX

  I do a lot of dynamic binding After Effects in first. So I'm constantly switch back and forth between the first and after touch. I would basically create the effect with AFX, then drag the comp on first and put it on my calendar. I would then switch back to AFX and tweak the timing of effects, back to the first and make sure it looks OK, etc.

  But since the latest updates, After Effects hangs now for 5 seconds when I move to make a few adjustments.

  This seems not to be that great after effects containing 100 comps projects.

  I use after effects CC 2015.3 13.8.1.38 and first Pro CC 2015.4 10.4.0 (30) man and 10 PC Windows.

  This seems not to be that great after effects containing 100 comps projects.

  Æ checks the integrity of the project and saves temporary versions of the project. Sounds perfectly normal to me. You may be able to get the best results by regulalrly flushing the caches, so older versions are not held, but really, this sounds more like you need to adapt to your workflow and splice the comps to separate projects on a "as needed" basis rather than keeping a whole big piece of data with all the consequences.

  Mylenium

• Windows 8: Active window gets inactive automatically and continues to the flashing [sudden switching between active and inactive window continuously States]

  Hello

  I use DELL NewXPS Ultrabook with Windows 8. When a window is open and kept inactive for about 1 or 2 minutes, it is automatically inactive and the continuous window status from an active - inactive shows automatically. When this happens, the window is idle most of the time and the active State continues to appear at irregular intervals, repeated for a few milliseconds. This appears in the form of a 'flash' in the title bar. It's really annoying, especially when I read a document, this flashing action breaks the concentration and is really a burden for the eye.
  I reinstalled the entire system through a complete restoration and tried to update all the drivers, but the problem persists.
  Everyone knows the same problem? What are the causes and what are the steps to follow to get rid of this? Can anyone help?

  Hello

  As you reinstalled the operating system, I suggest you to contact Dell technical support for assistance.

  http://en.community.Dell.com/support-forums/laptop/f/default.aspx

  Feel free to get back to us for any information related to Windows.

• Delicate design adds huge empty space when switching between breakpoints

  Hello

  On my site: http://mannyrothman.com . For some reason any in the browser when switching between breakpoints (mobile office and back on desktop) a large white space appears between «for professional content...» ' And 'contact'.

  What is going on? Is this a bug of Muse or do I set my breakpoints incorrectly?

  Thank you!

  Hi Manny,

  Your HTML widgets at the top of your page are the cause. Interestingly, it seems to be the "Flipping Transitioner V5" widget which is triggering problems. When I remove this Widget, page exports and behaves properly. With only this widget on the page, he begins to develop, then corrects herself. My recommendation is to study with MuseResources.com why this widget is causing this bug.

  Thank you

  Dana

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Switch between files and change the window using f8 - Dreamweaver CS 6

  In Dreamweaver CS 2, I could switch between files and windows edition with the f8 key. Dreamweaver CS 6, this doesn't seem to work. Is there a way I can put it so that I can switch between the 2 windows with a keyboard shortcut?

  Hello stilley,.

  I'm now working with DW CC, so I can only show you how to work with it, but I'm sure it's the same way:

  In my German DW:

  Bearbeiten > Tastaturbefehle > screenshot > files > Kurzbefehle +-taste press > change > Ok.

  Translated something like:

  Edition > keyboard shortcuts > screenshot

  

  > Files > shortcuts + - press > edit > Ok.

  Good luck!

  Hans-Günter

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.