Reset, to delete or remove family - Windows 7 security activity report

Windows 7 parental control software that I installed works fine (thank you).  Is it possible for me (Admin account) to clear the activity report for my "kids" account whenever I want?  Automatically clear at times, determined or never?

Thank you.

Hi Randall,.

Consult the following link which has more information on the activity report.

Clear/clear journal Family Safety.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/cleardelete-family-safety-log/d9e2fd69-be9f-44C3-bd39-e71f2c3145cc

I hope this helps. Please let us know if you need assistance.

Tags: Windows

Similar Questions

  • Windows Vista Security Center reports that I have no firewall protection or malicious software.

    Everything on my system was adequate and functional on 16/10/2010 with the Security Center notification that I was using Kaspersky 2010 with firewall protection and malware on the value.

    On 17/10/2010 update downloaded and installed windows 17 updated successfully. The system has been shut down, but restarting the system, the following Security Center said security problems that no firewall was there was no malware protection.

    After checking Kaspersky it said that all facilities are on and working.

    The Security Center also identifies a program Avanquest fix it is obsolete and did not provide security with a solution center to question. This piece of software has not served more than a year, and while it is still in the system, it is inactive.

    Anyone else has a problem with the last set of updates Vista?

    geoffreystone2

    Updates that took place after the restore point have been removed, if these programs need to be updated again (it is the restoration of the operating system - in fact, that's why it works).  It works simply on the updates of Windows, but on the updates or installations of any kind (except changes to the data).  This is not a problem and should completely (and was mentioned in my post above).  Reinstall the updates and you'll be fine here.

    System Restore may take a long time.  L ' turn off in the Middle can cause problems - problems, different problems and even serious problems.  If updates are still there (and you encounter other problems which essentially the same that you started with most of the time), then the system restore did not work or was not correctly filled (but it make some changes if some of your edits are no longer working at least partially and perhaps even completely) (, but just was not given enough time).  I suggest you try again and this time give him more time to finish - say a few hours at least, or maybe more, given the current circumstances.  To do this before you perform any relocation above because they will be lost again.

    I don't understand the issue of e-mail messages.  What do you mean by 'coded '?  What email program are you using?  I suspect that this may be the result of turning off the system before restoring it finished (or the problem with the system restore if it worked actually).  A successful restoration will solve I hope that whatever it is as well - but if we cannot get this to work, we need to abandon this effort at least for the moment.

    If this does not work, then I suggest you follow the advice of Malke (assuming that you have not already) and explain your efforts with the restoration of the system and the results that occurred as well so that they fully understand the situation.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 8 - report of removing family safety

    How can I remove the parental controls for a user activity report.

    Hi GaryFloyd,

    With the current design of the Windows parental control, we are unable to delete the activity report of the child. The reason behind this is so you'll be able to check the child across browsing history or other activities in the computer and design a much better parameters for the child using Windows parental control.

    Thank you!

  • I deleted an email in Windows Live Hotmail, who came to my Inbox and foolishly, has now been removed from the deleted items folder is what I can do to recover this?

    I deleted an email in Windows Live Hotmail, who came to my Inbox and foolishly, has now been removed from the deleted items folder is what I can do to recover this?

    original title: I deleted an important email

    Take a look at http://www.thewindowsclub.com/recover-deleted-emails-windows-live-hotmail

  • Why is it when I delete a message in windows mail it removes ALL message from Inbox in Xfinity connect

    Why is it when I delete a message in windows mail removes ALL messages from the Inbox in Xfinity connect

    Hi Carol,.

    1. don't you make changes to Windows Mail settings prior to this problem?

    I suggest you check this link on how to remove messages,

    Delete messages in Windows Mail:

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-messages-in-Windows-Mail

    Method 1: Fix problems with Windows Mail

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

    For more information, visit this link, working with Windows Mail in Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Working-with-Windows-Mail

  • folder Windows NT has files listed in the table TextService and I can not delete or remove them due to trustedinstaller being above me, the administration system. How can I remove these?

    These files do not allow me the owner of this computer to support in the permissions area or allow me to delete them in windows safe mode. I also can't do anything with the permission of edition since the Trusted Installer is the only access to those files.

    The file is Windows NT with two subfolders and I can't access or remove one of them.
    I want to delete these files to windows and my computer, how do I remove the Installer only access?

    I was finally power with some help of a video get youtube the answer that I need to take in charge and delete the files with out having to down load any software.

    files are gone from my computer after using the edit view and change the file sharing, then enter the permissions and change permissions for folder with my user as owner.
    This non-greyed out the locked area to finally remove the files and allowing me to access the files.
    If you think that microsoft could have posted a simple is how its done.
    step by step.
  • I need help deleting a folder named, Windows Live Safety\HistoryStore,

    I need help deleting a folder named Windows Live Safety\HistoryStore, I am running windows XP with service Pack 3, this particular file is read-only and hidden also can you help me please.

    Joseph Borg.

    I think that you need to uninstall the family safety program, take a look at this web page under XP: -.

    http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-remove-uninstall-FAQ

    It will be useful.

  • How can I remove / unsubscribe to Windows XP Security 2012?

    XP Security 2012 took control of my computer and doesn't let me do anything except purchase program?  I already have sufficient protection on my computer, but this program is not allowing me to do anything on my computer.  Can someone please help me out of this so I can use my computer again?

    It is a family of several thugs (change of name of the thieves).

    Here is a tutorial how to remove Windows XP Security 2012

    The tools you need are below: you can also use another PC to download the tools to a USB port if the infected PC are not able to download files.

    FixNCR.reg - this should be merged with the registry for tools will launch.

    RKill (it is a renamed RKill "iExplore.exe"), you must also run this to kill malicious processes and do not restart after runing RKill followed by MalwareBytes.

    MalwareBytes:-is the one that deletes the rogue.

    If the thief does not have to do anything, in order to facilitate the deletion use this code series 2233-298080-3424 (recording).
    This trick the thug into thinking that you paid for the software and stop the block and you can then run the tools to remove.

  • Remove unwanted windows that damages my office

    Greetings:

    I use Windows 7 Premium. Downloaded 'speed Fix Tool', then decided it wasn't for me. I deleted the program, but a window 'impossible record' can be removed from the workstation. Their help number seems to be false 1-855-252-5291.

    Obviously, I'm not an IT professional and would appreciate help.

    Thank you very much.

    Hiramfixit

    Please download a copy of your system information file. Click 'Start', type "msinfo32", click on "file" at the top of the page, select 'export' and give the file a name and click "Save".

    Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

    What browser do you use? Please reset default.

    Reset Internet Explorer settings

    http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings

    Firefox - modules to reset and refresh settings

    http://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

    Reset the settings of the browser Google chrome.

    https://support.Google.com/chrome/answer/3296214?hl=en

    I would also suggest that you Uninstall spark Trust PC Cleaner, immediately.

    Why you should not use the optimization tools and registry cleaners

    http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/?p=2853053

  • How can I remove the Windows Equium A60 operating system

    How can I remove the Windows of my Equium A60 computer operating system?

    If you want to have the own pre-installed OS simply use sent recovery CD/DVDs. Before installing the OS launches the disk HARD integer will be deleted.

    If you have t n, use the facilities of Microsoft CD. You will find the option to format the existing partitions or even to delete the partitions.

  • After the removal of Windows 10, why do I see Mac HD and Bootcam

    I deleted Windows 10 of my MacBook Pro (version 2009). Now, why do I see two disk: 60 GB Bootcamp and Macintosh HD 99 GB? I expected to see only o

    Hello waxwingDr,

    I understand that you deleted Windows 10, but are still trying to see the drive Bootcamp on your Mac. Let's see if we can understand what is happening.

    The question I have is how did you remove the Windows of your Mac partition. Let me know if you did the following steps, described below.

    If you installed Windows on a drive with multiple partitions

    1. Start your Mac in OS X.
    2. Quit open applications and log out all users.
    3. Open Boot Camp Assistant, and then click on continue.
    4. Select "remove Windows 7 or later", then click on continue.
    5. Do one of the following:
      • If your Mac has a single drive internal, click on restore.
      • If your Mac has several internal drives, the Windows disk, select 'Restore the disk to a single OS X partition' Select to continue.

    Boot Camp: Remove Windows from your Mac
    https://support.Apple.com/kb/PH17861

    There are other ways to correct if you see always the two partitions. Take a look at the following article below that passes on the partitioning of a hard disk. It will be an option to delete a partition and expand your main Partition of Mac.

    Disk utility (El Capitan): partitioning a physical disk
    https://support.Apple.com/kb/PH22240

    Expand a volume

    If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.

    To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device.

    WARNING: When you delete a volume, all data thereon is erased. Don't forget to back up your data before you start.

    1. In the sidebar, select the device that contains the volume you want to enlarge, and then click the Partition button .

    2. In the diagram on the left, select the volume you want to delete, and then click the button Delete .

    3. Click on apply.

      The volume is deleted, reformatted, and all the free space is assigned to the previous volume.

    4. Click done.

    Let me know if it helps.

    Take care

  • How can I remove the Windows, "Windows Picture and Fax Viewer" program from my computer

    I use another software Photo and picture Windows and Fax Viewer interferes with my work with the other program. Therefore, I would like to remove the Windows, "Windows picture and Fax Viewer" program from my computer.

    Info for WIndows XP - Windows Picture and Fax Viewer
    ------------------------------------------------------------------------
    OK... but be careful... you'll lose thumbnails of photos in Windows Explorer...
    your 'My pictures' folder... for example... does not display photos.

    And... FWIW... WP & F Viewer is not a program... it's just a .dll file. Disabling
    the .dll file is basically identical to uninstall. (in this way... If you do not
    as the result... you can reactivate).

    But if "gone forever", that's what you prefer... just delete the shimgvw.dll file.

    Attention last... your thumbnails in the Explorer will be gone.

    How... Disable WP & F Viewer

    Click Start / run and enter the following command:

    Type or copy/paste...
    regsvr32 /u shimgvw.dll
    (Yes, the space after the 2 and you is necessary)

    Press on... Come in...

    (You should see a dialog box indicating:)
    DllUnregisterServer in successful shimgvw.dll)

    How... Reactivate the WP & F Viewer

    Click Start / run and enter the following command:

    Type or copy/paste...
    regsvr32 /i shimgvw.dll
    (Yes, the space after the 2 and space after that the i is necessary)

    Press on... Come in...

    You should see a dialog box stating:
    DllRegisterServer and DllInstall in successful shimgvw.dll

    To remove shimgvw.dll go to the following folder and do a right click Delete shimgvw.dll.

    C:\WINDOWS\system32\shimgvw.dll

    If you can't find the path, you must go to...
    Button start / Control Panel / folder Options.
    See tab /... to check "Show hidden files and folders"...

  • Deleting files in the Windows folder.

    I have $NtuninstalKB... files $ in my Windows folder. I could delete them without affecting Windows?

    P S long

    You can remove them without making the overall Windows operatin, the question is why do you want to do this?

    I can only guess one of two things...

    (1) you're obsessed with cleaning the Windows folder (and all the others.)  A compulsion.

    (2) you are trying to free up as much space as possible for some reason any.

    Whatever it is...

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.  Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

  • I get message "not enough space on drive" when I check Add/Remove items, I noticed that the Windows XP security updates takes a huge amount of space? What can I do to reduce or fix it? __

    Free space on drive C - Windows XP Security takes a large amount of space.

    Beachaven,

    Welcome to the Microsoft Answers Community!

    How much space you show the updates of security take?

    It is recommended to leave all the updates security installed and continue to keep your computer up-to-date with Windows Update. Remove these updates will make your computer vulnerable to malicious software. If you need to erase the disk space, I recommend to uninstall old programs that are no longer in use. You can also check the disk cleanup tool to see if you can free up of any space there.

    ·         Click Start

    ·         Click on all programs

    ·         Click on Accessories

    ·         Click on System Tools

    ·         Click Disk Cleanup

    ·         Check the boxes of files to remove

    ·         Click OK

    ·         Click on delete files

    Hope that helps, I look forward to hearing from you.

    Steven
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I accidentally deleted a volume in Windows 7! How can I recover the data?

    I accidentally deleted a volume in Windows 7! How can I recover the data?

    I created a retractable partion on "D" Drive and later to try to remove it and accidentally I clicked on "D" drive instead of the new partition! "."
    Any ideas to recover data?
    Thank you
    Amal

    Hello

    You can try this free program; no warranty if.

    http://www.Piriform.com/Recuva

    See you soon.

Maybe you are looking for

  • How to restore the deleted site passwords

    I completely erased my story but not a not relise it deleted my aswell of passwords, I need them back can not rember them and hard to get new extreamily

  • How to save a group of tabs as a bookmark?

    If I can save groups of tabs as a bookmark, I would never have to worry about if Firefox is set to open the same windows the next time I open Firefox, or worry about the deletion of recent history. How can I do?

  • Problem of drivers function keys on Satellite A500

    It is on the tactile function of the hardware buttons (eco, music, Fw, Rw, volume and the toggle the touchpad) and not the Fn keys on the keyboard. So, everything was going well until one day I opened the laptop and there is no response on the PART o

  • HP SLATE 7 3400 sound we Intermittent

    Hello I have some difficulty with the audio output. The sound will often drop out if I have: Connect or disconnect the charger and plug the or Unplug the earphones or What seems sometimes random. Often I neeed to resater the tablet to get the sound.

  • I2C + class motor from examples of robotic controller

    I try to combine (i.e. to use together in the same project) the motor controller class used in "Starter Kit 2.0 Custom FPGA" with I2C of "Communication I2C - sbRIO" in the examples of the Robotics module. I have already combined the FPGA code in a si