Resize and repartition the virtual disk

Similar Questions

• cannot resize the virtual disk (vmdk) after successful hyper-v conversion

  Hello

  We are experiencing an environment vSphere 4.1. I have a problem on the Ramdisk resizing.

  We had managed to convert a hyper v VM. Virtual machine operating system is Windows 2008.

  After that, I can't resize the virtual disk (GB in disk options was gray-ed out, even when the virtual machine is power down)

  It's strange

  I have attached several screenshot of the virtual machine.

  Need your advice.

  Thank you

  His grace is on the IDE interface and you can not resize. the only way is to reclone using vmware converter and resize in the wizard. For more information: http://www.yellow-bricks.com/2010/05/28/resizing-your-ide-virtual-harddisk/

• What is the right way to expand the virtual disk and then the OS partition?

  I have a Windows XP operating system in a virtual machine VMware.  I have

  you want to increase the size of the hard drive.  It currently has a 50 GB

  partition on a 50 GB VHD.  I increase the size of the

  50 GB to 100 GB in VMware virtual hard drive.  Then, can I use

  Windows disk management to increase the size of my partition of the

  side OS to use all the 100GB he sees now?  Or will

  corrupt my data or cause a problem as I really need to

  use a third party tool like EAUSUS inside Windows to extend Windows

  on the size of the virtual hard disk?

  In fact the way you describe, resize the virtual disk and then developing the partition are the way to go. But there are some things that you should be

  aware of.

  -If the VHD is on an IDE controller, you may not be able to resize the virtual disk. In this case use the converter. With the converter, you can resize the disk including the partition and - if desired - replace the IDE controller by a SCSI controller.

  -If you have only one partition under XP (that is, drive c :)) you cannot extend the partition with the diskmanager/diskpart. In this case, start your virtual machine from a CD/DVD Vista/Windows 7 in Repair Mode, open a command line and use "diskpart" from there to "extend" your partition.

  André

• Failed to initialize the library for the assembling and disassembling workstation virtual disks 9

  I am using VMware Workstation 9.0.4 build-1945795 and have a problem with "map of the virtual disks. I tried map a virtual drive on windows server 2008 r2, windows server 2008, windows 7, windows xp, windows 2000, windows 98, and BACK 6.22. I have went to the file - card virtual disks and get 'Could not initialize the library for the Assembly and disassembly of the virtual disks', every time I have try to map any operating system for the virtual machine. Some have snapshot while others do not is a mixture of 64-bit and 32-bit virtual machines. My system is Windows 7 Enterprise 64-bit. What I'm missing here because if a feature is available in the menu you seem to expect it to work actually on something.

  OK the fix for me was that I had to uninstall VMware workstation and now it seems to work very well on all the OS preceding reinstall it.

• VMWare Player installation and Installation of the software in the virtual disk

  Hi people,

  I installed VMWare game in the free Version. I want to use the virtual disk for a Windows XP operating system. I have the following question for my main system (8.1 Windows 64 bit system stand-alone system).

  1.

  I installed a Windows XP 64-bit with SP 2 system. In this virtual disk, I installed a software that needs several software components. I managed to install all the components, but one. This component is WindowsInstaller-KB893803-package x 86 lot. If Intry to install the following error notice appears: "Ce KB893803v2 is for a different hardware platform." How can I make this software to obtain the virtual hardware information (i.e. not information of the current build-in components for Windows 8.1).

  2.

  While I did all the settings in Windows XP SP2 in the virtual disk on 'German' keyboard assignment is American. How can I change this?

  3.

  I have a 64-bit Windows 8.1 system on my computer (I think it said 'Host system'). Can I install a Windows XP 32-bit system in the Ramdisk anyway?

  Please answer in detail. I thank in advance for your answers.

  Kind regards. Mainze

  
  

  Don't worry too much on the OS host and/or physical hardware like handles of VMware Player, which is required to run Supportepar OSes as guests, for the most part, a layer of virtualized hardware.  Windows XP 32-bit should work fine in VMware Player on your 64-bit Windows 8.1 host.

• How to resize the size of the virtual disk for Linux guest OS

  Hello

  I installed VMWare WS 6.5 on my host OS (Vista) and have created a guest VM with RedHat like OS.  When creating, I've specified to create a virtual disk with a size of 8 GB, but have not selected the option of immediate creation - it being understood that VM is assigned additional as needed.  But now, on the comments and space use is 100%.  How can I allocate extra space for the virtual machine?  Also, is it possible to go beyond 8 GB, if so how.

  Enjoy your time, help.

  Concerning

  VMware-vdiskmanager allows to extend the virtual disk and use a third-party utility to extend the partition of guest operating system after having developed the virtual disk.

  Make a backup of your virtual machine before you do anything and you ensure that you don't have any snapshots

• Problem with solution th 'how to repartition the HARD disk of laptop HP with Windows 7 preloaded ".

  Hello

  I tried the solution in this link

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-...

  and step 2 'delete the 100 MB SYSTEM partition '.

  When I try to put my disk partition as active partition c, I got this error:

  the virtual disk service error:

  the specified partition type is not valid for this operation

  My ch. drve status is: partition 0 extended 400Go

  my new c drve status is: 100 GB logic

  my status is d drve: logic 300 GB

  I haven't done anything after seeing this error

  IAM in this place now

  I need our help, please help me. What should I do now?

  Hello

  C partition is converted by you logic.

  This is why you cannot set as active now.

  Only the primary partition can be set as active.

• Consolidation of many to one of the virtual disks?

  Hello world

  I use a XP client inside a Windows 7 host (using 8 workstations).

  In the configuration of my XP virtual machine I previously assigned (of 50 gigabytes) of disk space into separate virtual folders, about 2 GB each, as shown below.

  

  I now want to have a single vmdk file, with the pre-allocated 50 GB of capacity.

  Is it possible that I can achieve this goal, while keeping my VM in tact? For example can I create a second virtual disk, and then use a cloning tool (from the client) BONE to make a copy to the new virtual drive?

  Here, any help will be greatly appreciated.

  Kind regards

  DAVO

  Hello world

  This can indeed be done! Because I started with a scalable, split, virtual disk, there were several steps; Here's the gist of these measures-

  (1) using the vmware-vdiskmanager merge files into a single.

  http://hostilecoding.blogspot.com.au/2013/06/VMware-merge-multiple-VMDKs-into-single.html

  Note: when running this utility do not forget to include the '2' parameter, which refers to the creation of a virtual disk prealloue, otherwise the following steps (use the shrinkvd program will NOT work!).

  Here is a screenshot of the order that worked for me-

  

  (2) add the newly created virtual disk, 'merged.vmdk' to the existing virtual machine, using these installation instructions.

  https://www.VMware.com/support/WS5/doc/ws_disk_add_virtual.html

  (3) remove the existing virtual machine virtual drive

  (4) to start the Virtual Machine (you will probably be asked if you have moved or copied the VM, I responded with "Proposed").

  (Optionally)-rename the virtual disk of "merged" into something else by renaming the files in the ".vmx" and "hard" files.

  (5) using the shrinkvd resize the virtual disk

  http://www.Softpedia.com/get/system/system-miscellaneous/shrinkvd.shtml

  

  Above, note that the first time, I ran the command it failed with the message "ddb.deletable" is the crux of the problem. I just deleted this line in the relevant file "hard" and the command is represented.

  Now, when I boot on my virtual XP I use only 24 GB of space, and I am able to transfer the Virtual Machine to a smaller drive. in this case a 30 Gig old SSD.

  I hope this helps others.

  Kind regards

  DAVO

• The virtual disk parent has changed since the child was created

  Hi all, need your help with this one.

  I deleted two snapshots and now I can not start the virtual machine.

  Get the following error:

  Reason: The virtual disk parent has changed since the child was created.
  Cannot open disk ' / vmfs/volumes/4c483d34-a8c778c4-46a5-001cc460f09e/WEBPDXXXY/WEBPDXXXY_1-000003.vmdk' or one of the snapshot disks it depends on.

  I tried that link but still did not work KB: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1007969

  I can still see the WEBPDXXXY_1 - 000003.vmdk, WEBPDXXXY_1 - 000002.vmdk and WEBPDXXXY_1 - 000001.vmdk when I browse the data store.

  WEBPDXXXY_1 - 000003.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 59fab513
  parentCID = a4a63bd5
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000002.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDWEBPDXXXY_1-000003 - delta.vmdk.

  # The database disk
  #DDB

  WEBPDXXXY_1 - 000002.vmdk
  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = a4a63bd5
  parentCID = 0f8995f3
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000001.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000002 - delta.vmdk.

  # The database disk
  #DDB

  DDB. Deletable = 'true '.
  ddb.longContentID = "ab1b7008e386c884ae920930a4a63bd5".

  WEBPDXXXY_1 - 000001.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 0f8995f3
  parentCID = 926f96fa
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000001 - delta.vmdk.

  # The database disk
  #DDB

  ddb.longContentID = "0336846d9f849b4b97ad028f0f8995f3".
  DDB. Deletable = 'true '.

  WEBPDXXXY_1.VMDK

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.

  CID = 926f96fa

  parentCID = ffffffff
  isNativeSnapshot = 'no '.
  createType = "vmfsRawDeviceMap."

  # Description of the measure
  RW 209715200 VMFSRDM ' WEBPDXXXY_1 - rdm.vmdk '.

  # The database disk
  #DDB

  ddb.toolsVersion = "8295.
  ddb.adapterType = "free".
  DDB. Geometry.sectors = "63".
  DDB. Geometry.Heads = "255".
  DDB. Geometry.Cylinders = "13054.
  DDB. UUID = "60 00 C2 92 41 62 5 d 8f-10 59 12 60 53 0 to a8 94.
  ddb.longContentID = "b204c5bc523bbc83c01dd3ed926f96fa".
  ddb.virtualHWVersion = "7".
  DDB. Deletable = 'true '.

  Is there a chance to run ls-lisa from the command line (SSH) in the virtual machine folder and provide the output!

  I ask because I'm a little worried about the timestamp of the hard (May 2011). Depending on the size of the files in the snapshot, it seems that the second virtual disk is not really used by the guest operating system and we could come back manually (by editing the .vmx file) on the resized basic disk (100 GB compared to 75 GB for snapshots) without losing important data!

  If you want to revert manually,

  • delete the virtual machine of the inventory
  • backup and then edit the .vmx file (replace "WEBPDMAPPD_1 - 000003.vmdk" with "WEBPDMAPPD_1.vmdk")
  • Move 3 snapshots in a directory temporary sub
  • Add the virtual machine to inventory
  • create a new snapshot to prevent the current hard files to be modified
  • Turn on the virtual machine

  If everything works as expected, you can delete the snapshot files moved and remove the snapshot created in the Snapshot Manager again.

  André

• How to correlate the virtual disk on the disk of OS

  I need to remove one of the virtual virtual machine disks. The problem is that I have two identical drives, more they are on Rible virtual scsi adapters so if I look at the properties of disks in disk management, they are both targets ID 0. Is there another way to correlate the virtual disk belongs to disk inside the BONE?

  ESX4.1U2

  W2K8R2

  TIA

  Troy

  Since this is often not easy to understand, I usually create each disc with a slightly different size. That said, resize one of the disks (for example add 1 GB virtual disk) and you will be able to identify the disk that you want to remove.

  André

• Increase the size of the virtual disk.

  I just installed Windows virtual PC on Windows 7 64 bit and I try to install a program of 6 GB.  He said that there is not enough memory.
  The size of the virtual disk in less than 2 GB and I can't find any way to increase this size.  I tried to create a second virtual disk with more memory, but the same error comes back.  Is there a way I can increase the size of the primary virtual disk?

  Post here http://social.answers.microsoft.com/Forums/en-US/w7install/threads or here http://social.answers.microsoft.com/Forums/en-US/w7programs/threads instead.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• Could not load the virtual disk manager

  I am operating Windows 7 SP1. At one point, I lost the ability to use the virtual disk manager. I've scoured the web and many forums to find answers and none worked. I tried to repair windows, run sfc/scannow, etc stopping before you reinstall windows, which some people have suggested that I have many software loaded and am not sure that this will not happen again once I loaded the software again.

  It is a "backdoor" way to force launch disk management? My need is to change disks on some of the hardware devices, such as DVD players and card readers.

  Would appreciate any advice or suggestions... Thanks in advance.

  Hello

  Thanks for the reply.

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• When running Disk Management, get the error - failed to connect to the virtual disk Service.

  When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.

  Thanks, I have tried these things and nothing has solved the problem.  Here's what I did:

  (a) check the VDS service was manual and failures later per second are 'take no action '.
  ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
   
  (b) sfc/scannow as administrator
  ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)

  (c) restore to a previous system restore point
  ANSWER: I have tried restore points several more early, each of them failed

• Copy of the virtual disk for use by another virtual machine

  Hi all! How can I copy a virtual disk file to a location for future use by another virtual machine? I tried to just copy the hard, but it did not work for me - the copy is about 1 KB size and I can not add it as a hard drive on another virtual machine. Can someone help me?

  OK, so this client web vSphere that you use, in this case browse datastore doesn't show you the two files.

  Please follow the steps below

  Please go to Cluster & host inventory

  Select your ESXi host

  go to the tab 'Manage'-> settings-> Security-> Service Profile, and then click the button CHANGE

  Start the SSH service.

  If please use WinSCP to connect to your Esxi host and navigate to the folder of the virtual machine as in the screenshot to the suite, I navigated to a folder that is my VM name: Win10A

  and it has a virtual disk, if I want to take the virtual disk of this virtual machine to a different VM, I need to copy the two files that are highlighted.

  the two are to train your virtual disk.

  

  Download these two files and download them to another folder where you second VM resides, then try to tie it with this virtual machine.