Resolution in the form of Member order

Similar Questions

• the difference between the form of Member or a calculation Script?

  Hello
  I am going through some assignments. Here I observerved in essbase we can do the calculation using the calculation Script or a member form.
  
  I know, Member we can write to any Member, it is only for that perticular in outline and stored in outline members. and calculation for any database stored Extornally script.
  
  A fully written BSO formula was 1242 lines and i.e.formula 75 493 bytes size less than 64 KB. It is the limitation of the formula of Member, is their any other difference apart from that, because of this we can use the calculation on the Member form script or if anything else, so, please let me know.
  
  
  So could you tell me:
  When use the formula of Member and what is the advantage of the Member, or when to use the calculation for calculation script?
  
  What is the best option that I'll go for formula script or calculation of Member?

  A few comments based on the response of SS1988.
  1 unary (contour) calculations are the fastest type of calculations.
  2 many if not most of the formulas of Member are performed on dense dimension as dynamic calculations (and sometimes sparse dimensions) these work really well especially for type ratio calculations where you would have to calculate at each level of the database. The best formulas will make only reference members in the same block because they are quicker to run. Complex formulas can be slow.
  3. calculation scripts you give the most flexibility you can do calculations procedures (followed by B Calc calc A do) and you can limit the scope of a calculation using the patch and if statements

• Problem creating block in the form of Member

  Hello
  
  I have a formula of Member as below:
  
  IF (...)
  x = a / b;
  ENDIF
  
  where a, b have their own forms of Member.
  There is no problem with the calculations of x, a or b, but I am facing a problem with the creation of the x block.
  Is there a way to manage the creation of block through member formulas? I know that the way out through calc scripts, but I try to limit the use of calc scripts.
  Thank you!
  
  Note: the storage of three members property is store. In addition, and b are in the same intersection (same block) and x is in another intersection.

  Hello

  Change the property storage of members as 'Dynamic Calc' instead of 'data store.
  Hope it will work.

  Thank you.

• How to disable the feature in the Tools menu in the form of purchase order.

  Hello

  Hello

  I am Gerard and new in the oracle community.
  I currently checking if there is a way where I can disable the function of currency to convert to the format of order?

  Goal is due to is no longer appropriate in the current business of the user operation.

  Would this be possible? And if it is possible, is there a problem?

  Hope that can anyone help me on this.

  Thank you very much.

  Gerard

  No,

  Just give that an action of type message and the type of error.

  No need to LIFT of FORM_TRIGGER_FAILURE.

• Simple sum in the form of Member ASO

  This works very well in my formula: [P07] + [P08] + [P09]

  I want to be able to perform the same calculation using the sum function, but nothing I try seems to work.

  I believe that it is easy, but I'm pretty new to ASO.

  Try sum({[P07]:[P09]}). I don't know if it'll be faster that you'll have to try on your database and see one that works very well for you.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Problem with HTML tags in the form of Member

  I have a dimension with the formula
  
  ' < table > < tr > < td = style "padding-left:" 0 "width =" | CAST ("Sales Amount". ") Sales made "/ 1000 AS VARCHAR (20)). "" bgcolor = #9C9ECE height = 16 > < table > < /tr > < / table > ' "
  
  
  and the error is
  
  The formula syntax is not valid.
  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 27002] Close <><: syntax error
  [nQSError: 26012]. (HY000)
  SQL: SELECT '
  «OF «Sales history "»
  
  Can you help me what is the problem?

  Use this

  CONCAT (CONCAT ('))

  ')

  I would suggest to spent in Notepad and then copy and paste into the answers.

  Just in case if you get any errors, just delete ' (single quotes) and add them using the keyboard.

  Appreciate if you mark it as correct.

• Question about the formula of Member and BegBalance

  I have a requirement where I need to calculate the value of '' suffering '' and need to save it somewhere so that I can use it to display on the dataforms.
  
  The logic of the last value Due must be--
  
  Suffering = year previous year Total + current (Jan: Prior month)
  
  I was planning to write a formula for this member. Can I use substitution variables, as title, etc. PriorMonth in the form of Member to achieve this?
  
  In addition, since we do not use BegBalance Member for purposes like the display on the dataform etc. can I use for this requirement where I can write the formula of the BegBalance member and give it an alias name 'Suffering' I can use to show on the dataforms. Is this possible?
  
  Please let me know. All entries are appreciated.
  ~ Hervé

  Hello
  Perhaps it should look like this:
  & priorYr-> YearTotal+@sum(jan:&currMonth);
  / * No need to specify the current year as it would be fixed in pov, column or page. If necessary, replace the sum with @sumrange(&currYr,jan:&currMonth) * /.

  See you soon,.
  Alp

• Resize the form according to the resolution of the Client computer

  Dear all,

  We work on form 11g, and we have our form to be resized according to the resolution of the customer. How can do us?

  Thanks in advance,

  Vishnu.

  Dear to Vishnu.

  To set / change the size of the window according to the customer's screen resolution try,.

  SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, WINDOW_STATE, MAXIMIZE);
  SET_CANVAS_PROPERTY('', WIDTH, GET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, WIDTH) - 33);
  SET_WINDOW_PROPERTY('', WIDTH, GET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, WIDTH) - 33);
  SET_CANVAS_PROPERTY('', HEIGHT, GET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, HEIGHT) - 131);
  SET_WINDOW_PROPERTY('', HEIGHT, GET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, HEIGHT) - 131);
  

  The fixed numbers are fixed for the menus and some area of the window. You can adjust these numbers based on your needs. Then change X, Y, width, height according to your requirement.

  Manu.

• customization of the form - sales order lines

  Hi all

  My requirement is to do a column not used as barcode field, during the seizure of the sales order lines, so that the user enters the bar code. The point corresponding system, description code must do this by default.

  The link between the barcode and the article is available & captured the FDF - attribute1 to the master of the order of the day.

  I used columns customer number as bar code and populated the value of the element using the customization of the form. But in the normal client command line all by choosing the item UOM is filled in automatically and by entering the quantity, the price will fill. This is not the case in my case.

  Property:

  Object type: agenda

  Target the object: LINE. ORDERED_ITEM_DSP

  Property name: VALUE

  Value: = sΘlectionner segment1

  of mtl_system_items_b

  where attribut1 = "| ${point. LINE. CUSTOMER_LINE_NUMBER.value} | "

  AND organization_id = "| ${point. LINE. SHIP_FROM_ORG_ID.value} | "

  Thank you and best regards,

  Max

  In OM responsibility, go to components-> cross reference, create a new Cross Reference Type of barcode.

  Click the Assign button.  Add an element and in the value column, put your code bar.  For bar codes, leave the 'Applicable to all associations' checked.

  Now go to the screen and control in the field of the ordered item, type the barcode value that you set up.

  Using tools folder on the command line, you can expose 'Internal Article' and 'Type of item identifier' to see that the type is 'Barcode' and it is mapped correctly your internal inventory item.

  Most of the documents will show the ordinate the question - if all your documents will also show the value of code barcode for this command.

  Here is an article with some screenshots: Johan Louwers Personal Blog "my view on the world".: Oracle EBS cross references

• Select the Member not level 0 in the form of Hyperion Planning

  Hello

  I have the next dimension:

  Total product (Lev 3)-> product-> product-> product (Lev 0) (Lev 1) (Lev 2)

  In the form of selecting members, I need to dynamically select ALL AND ONLY members of level 1 (range). How can I do this?

  I can't use a filter on an attribute, because the product range is not level 0 and the member functions (ancestors, children, Parents,...) do not seem to apply in my case.

  I thank you,

  Federico

  I don't think that there is a simple approach. If your rating is sparse, then you can assign attributes to the level 1 members and use the form.

  Concerning

  Celvin Kattookaran

• I bought photograhy creative cloud, but my status is a free member and program of the trial. My order number is DELETED

  I bought photograhy creative cloud, but my status is a free member and program of the trial. My order number is DELETED. If I can't use it to the full option within 24 hours. I'll cancel.

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Problem with the order of focus of keyboard on the form of Muse (UPDATE)

  Hello.

  I used the standard form of Muse on a Web site. Everything works fine, except for the order of keyboard focus.

  I mean, it's after a name entry, you press TAB and you go on the field of the e-mail. That's ok. BUT, when you press TAB once again, it will not in the message field. He goes to the button send and then starts to go through the links in the navigation bar and only after all of them it goes on the message field.

  I suspect that my form is not align vertically (and shot the message field to the right) Muse is just after a vertical order. As there is nothing under the email field, it goes back to the navigation bar (which is fixed at the top and has interactive elements / links) and then again to find the message field.

  I think the image as an attachment can explain this better. The URL is Bytezone - Digital goods better to do besides.

  Is the cause of the order of the fields in the form, or is there a way for me to control the order of keyboard somehow focus?

  UPDATE - I just realized that the FIRST element to focus on the use of the TAB key is the message, then the name and e-mail (which is weird). How can I solve this?

  Thanks in advance.

  
  

  PS - as a 'bonus' problem, I can't find a way to edit the FOCUS State of the Submit button also. Is this normal?
  

  

  Muse assigns values to index tab in a 'left to right', then order "top to bottom". Then tab order should follow the same regardless of the creation of fields or placement in design mode.

  Thank you

  Sanjit

• Rule RTP company fills only the first member of the form

  Hello

  I have a form where the accounts are in lines and measures in columns.

  I have created a business with the {FormAccounts} Variable rule (TYPE: members ... is not a member). Variable is used in the declaration of FIX, so that the calculation applies only to members of the selected account.

  When I select several accounts (online) and BR (via right click Menu) on the appeal form, the guest opens and only the first member of the selection is filled in the variable. When I run the BR, the calculation is applied to this member (which is OK)

  However, I can select several members by clicking the Member Selector and add more members to the variable. The calculation is properly invoked for these members.

  So my question is, why my variable get filled with selected members (I tried selecting names of members [who selects all lines], cells). The variable is RTP, because I wanted to see which members are getting selected, otherwise it may be hidden.

  
  

  Somehow the BR integrated: setting-> adjust the data is used when several data cells (members) are selected. Basically, I want my BR to be populated with selected members of the form adjust data works the same way.

  Is this a bug or planning simply cannot fill custom variable br with several selected members of the form.

  I don't make any sense?

  Thank you in advance...

  Sašo

  I think that this is how it works. I tried with a variable whose type is members.

  It is not showing me a prompt when I select several lines. However only works for the first row. (even if the menu is started from the second row).

  Multiple lines selected, variable of type members. only works for the first line of the selection. (in 11.1.2.2) You can try to connect an SR and see what Oracle has to say.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Order of the form fields and the name (without CB) in Email

  Hi fans of Muse.

  I have little problem set. order of fields in form of Muse and naming in the submitted e-mails.

  There is a simple form (for a subscription to the newsletter) with 3 fields (tags are off): name, surname and email address.

  Muse site is not hosted on BC and everything works fine (emails sent, name and email are delivered) except these things:

  1. the subject of the email subject is "submission of form XY. Is it possible to change the subject?

  2. in the presentation of muse, I have 1 the name field (for the first name), then a single line filed for the name field, then the email field.

  But the delivered mail reads as:

  Name: XY (First name)

  Email: email

  Custom: XY (family name)

  Is it possible to change the order and rename the fields correctly?

  Thanks in advance

  CPT Hoschi

  The label used in the enamel, is the same thing as the label used in the form of Muse, even if the label is hidden, so you can change your last label of the name "custom" for "last name" field and which should improve the email you get.

  In regard to the order of the fields in the email doesn't match not in order on the page, I think it's a bug of Muse. Muse currently generates e-mail based on the order of the fields in your form, rather than the order from top down. You should be able to affect the order of fields in the e-mail by selecting the individual form fields and choosing "send to back" or "leading" in the menu object.

• Complete loss of the tab order in the form

  I got a MS Word document (2003) I have open in my MS Word 2010 and saved as a .pdf document.  Then I open the .pdf file in Acrobat Pro v 9.4.7 and used the forms tools to create a form to fill out.  My order of tab shows exactly as I want it to perform.  I close the form.

  I can open this form on my computer - using the TWO Adobe Acrobat Pro AND Adobe Reader 9 (v 9.4.7 also) and the form performs exactly as I intend to.

  However, when I tested it by work colleagues, the form of tab does not perform as expected.  They use Adobe Acrobat Pro v 8.1.3 and Acrobat Reader v 9.0.0.

  Can someone help me understand why this is happening and how I can fix this problem?  Me and one of our developers have spent hours on this and can even lead to the root of the problem and still less resolve the problem.

  Thank you!

  Susan

  It's weird. I don't see the same things you do. The tab order works very well for me in Acrobat (9.4), Reader (9.4) and player (10.1.1).

  When I converted it to an XFA form opening in LiveCycle Designer (8.2.1), the tab order is correct. Note that when you do so, it comments on all the JavaScripts and makes other changes and translates a file of nearly 7 times more.

  A test, try to change the tab order of the form v1 'Order of the lines' in Acrobat and save to a new file. Does make a difference? It would also be interesting to see what happens if the user updates to the latest version of the player.