Resolution of issues interview

Similar Questions

• vSphere vCenter - vCenter 4.0 Update 1 resolution VM issues slow because the disk i/o latency?

  vSphere vCenter - vCenter 4.0 Update 1 resolution VM issues slow because the disk i/o latency?

  My client is slow VM problems that appear to be disk I/O latency on Hitachi storage 1000. I heard in VMware meetings vCenter 4.0 Update 1 solves these problems... without any explanation as to why.

  Rumor is that "after working all the angles of the slowness of the virtual machine including vmtools hardware version, latency of storage, etc. called VMware support and advised to get vCenter to U1 to solve the 'known problem' VM performance issues." "U1 fact and problem solved.

  It is VMware User meeting and I have no other details.

  Customer did not of U1 and having problems of slowness VM believes may be due to the assets/Hitachi 1000 s and favorite paths questions (known to cause problems). Preferred fixed pathing but questions continue.

  My limited participation in the issue of troubleshooting in the date limit information available now. It is just an issue if 'known problem' exists and is known to be resolved via U1 vCenter or ESX 4.0 U1?

  Not vCenter 4.0 Update 1 solve disk i/o latency issues considered the slow pace of the vm? Why?

  All points will be awarded.

  that strike!  You can use round robin or MRU for active/passive.

• dimension size docment size resolution

  Use the image on the Web site.

  Really no idea with resolution, size of the Document, Dimension size and adjust the Image function.

  Use the Web site, do not need to deal with the size of the Document, right?

  Changes with the size of the resolution and the resolution, some time, the resolution is about 100 but the size dimension is very high about 2500 to 3000 pixels.

  Change the size of the Dimension will change the resolution very very low in this case.

  Image adjustment can fix the size shows Web site?

  When you use Photoshop to do things resolution of issues. So when you add watermaks to siz different images, it can be difficult to manage the size.  You will see that in my example tattoo action.

  • Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
    Contains
    • Action Actions Palette Tips.txt
    • Action creating Guidelines.txt
    • Action dealing with Image Size.txt
    • Strengthened through scripts functions.txt Photoshop action
    • CraftedActions.atn sample Action set includes an example of Watermarking action
    • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
    • More then a dozen Scripts for actions

    Example of
    Download

• Essentially of c80003fa error / update no. / no MS Software Install possible 7 Pro x 64 bought & installed today $180! / Defender works not

  Hello

  I'm from Germany - but I have not received a response to my problem here at all.
  I bought a copy of Windows 7 Pro today, running x 64, installed today & had to erase my XP Pro x 64
  version to do. It cost me$ 180! and its giving me all sorts of problems.

  First I did as directed, a complete new installation on my new computer built 3 weeks ago
  zero using premium parts to halfway "nine".

  AMD Phenom II 965 Black Edition
  2 x HD 4890 ATI CrossfireX
  8 GB OCZ DDR3-1333 RAM
  ASUS Crosshair III Formula MB
  2 x WD VelociRaptor HDs (Raid 0)

  After installing the operating system and having to enter the key to product twice, he was finally activated
  and began the download of updates. Download and then abandoned and gave me a c80003fa
  error. Try again a little later, he showed 11 updates, acknowledged the download/install and it
  abandoned gives me an c8E5E0442 error. Tried to use the resolution of issue online - returned
  an error message cannot run the Problemresolve service. So, I tried looking for update
  even once - he showed me the green check mark - computer is up2date. UM, so I thought it was
  downloaded and installed the updates. So I checked the updates installed - showed that a
  white screen and the OK"" button. So I thought that allows the restart & next to the stop"" button.
  He showed the yellow symbol, having installed updates. Then I hit the close button, and
  reading displays 'goodbye' 'Installer 1 of 3 updates' - but apparently, he was
  hung himself up - waited 20 minutes - nothing's happened yet to 1 of 3 updates, then I hit the
  selector. Reset. Since the c80003fa all the time. Cant manually install updates,
  can not I install 'MS Security Essentials', or 'any other MS Software' Services.
  Windows Defender does not install and I can't activate this service. Behavior
  saeemed for me as he treated me like a pirate software, so I did the WGA tool,.
  all - no help. Its seems locked. If I press F8 at startup to the top, and then select "load the drivers without.
  Authentication "at least my grafics card shows a bird's-eye view. I got the c8E5E0442
  error once again in the meantime and a c8000FFFF error. Please someone here in the States
  Help me. Sorry for my English and bad translation of system popup text, as I wrote
  I'm from the Germany.

  M.A.C.

  Marcus,
  OK, you can check that your date, time, and time zone are set correctly for your location.  Then we have problems trying to download the logs.  You can post the last 50 lines of the Windows Update log in this thread? And make sure you have gone through all the steps in this article: http://windows.microsoft.com/en-NZ/windows7/Windows-Update-error-80244016-8024402f-or-c80003fa Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updated 646 error Code to Microsoft Office 2010 Home and Office Edition using the Version Windows 7 Professional 32 - Bit

  I just bought Microsoft Office 2010 & individuals.  I was prompted to install the following updates 9: definition update for Microsoft Office 2010 (KB98726), Microsoft Office 2010 security update (KB2289078), Microsoft Office 2010 security update (KB2289161), update security for Microsoft Publisher 2010 (KB2409055), update security for Microsoft Word 2010 (KB2345000) updated for Microsoft Office 2010 (KB2202188), update for Microsoft Office 2010 Validation of the file (KB2413186) update for Microsoft OneNote 2010 (KB2433299), update for Outlook Social Connector (KB2289116).  I tried several times to install these updates by using Windows Update without success after the resolution of issues of update could not solve the problem.  Is it possible to install these updates on my computer & to receive future updates without more questions?  Extremely frustrating after spending more than $250 for the software.  Help, please!  Thank you.

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

• 2550PS LaserJet won't print

  Please do not laugh at the age of my printer. It does everything but print. Have tried all the instructions in this enormous amount of info provided with the printer but nothing helps. Drum does not turn to that can be the problem. Anyone had any experience with this particular model? Any help will be appreciated.

  If this device is able to print the test pages internal successfully, you may need to check the issues related to the connectivity of the device with computer (network, parallel, USB) and the software/driver installation is done on the computer.

  If the device is not able to boot successfully until the State of PREPARATION due to a mistake or not able to print internal test pages, then the (Panel status LED) error code displayed by the printer can be useful for the resolution of issues related to the peripheral equipment.

• Windows ox8024402c update

  This update has been reported as being not fixed in the resolution of issues of update. Is there anything that will fix it. It prevents me to get windows 10.

  How to troubleshoot problems connecting to Windows Update or Microsoft Update
  https://support.Microsoft.com/en-us/KB/818018

• How failover in two survey periods?

  Hello

  Its can issue interview please give me an idea to make failover at IPS 6.1 or anything? And how its work I try to look for I have not the right solution.

  Help on the same.

  Presilia Adte.

  Hi Pascal,.

  There is no mechanism built into the IPS software failover.

  Redundancy can be achieved by two sensors chaining on interfaces capable of HW derivation or put sensors on several areas of your network and let the layer 2 connectivity to send the traffic through one or the other.

  Kind regards

  Nicolas

• Problem with windows updates

  Hi, I have a problem downloading and installing windows updates. Said Windows Update downloads updates but percentage complete rest to zero and continues from the market. Is not not able to download and install the updates stop me download windows 8.1 store. The resolution of issues of update said it fixed the problem whenever I run it, but the problem is not fixed. I hope someone can help, thanks, Pat.

  Hello Pat,.

  Thanks for posting your concern on the forum.

  According to the description of the problem, you cannot download and install Windows updates and this issue may occur if one or more of the following conditions are met: 

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  Try it out below mentioned methods and see if it works for you.

  Method 1

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  Method 2

  If the problem persists, try to follow the steps mentioned in the article mentioned below, that you have already run the troubleshooting of update.

  Problems with installing updates

  Method 3

  If the problem persists, I suggest you reset the Windows Update components , and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Policy number: 1000pt resembles 1pt

  Photoshop CS4/CS5 both x 32 and x 64

  I use Windows 7 x 64

  I just changed avatars as I usually do one a moment my fonts worked well, the next not so much.

  

  I have deleted all fonts that I could and tried again but still have the same problem before I went on resettlement again.

  J, you use actually the text tool?

  Resolution of issues ABSOLUTELY to determine the size of the characters, no matter where the image is intended to be used.

  As a test, create a small image, said 300 x 300 pixels.  Select a resolution of 100 pixels / inch.  Now use the text tool, selection, say, an 18-point font.

  Now, create another image of 300 x 300 pixels, the resolution of 300 pixels /inch.  Use the text tool with a font of 18 points on that one also.

  See the difference?

  The setting of the resolution of the image is important, because the police is drawn at such a size to come to the point size right on a draw with the given dpi.

  -Christmas

• Get error when using charles

  Hi all

  I learn the FCS and when I use Charles to see what is happening in the transactions, I get errors:

  #THROWING ERROR # URLLoader onError. Error. : [IOErrorEvent type = "ioError" bubbles = false cancelable = false eventPhase = 2 text = "Error #2032: stream error."] ["URL: http://connectnow.acrobat.com/XXXX/room2?glt=g%3A & x = 0% 2E6759106982499361 & mode = xml'] >
  INVALID_INSTANCE: Invalid Instance
  at com.adobe.rtc.session.managers::SessionManagerBase/receiveError() [C:\work\main\connect\co comoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:270]
  at com.adobe.rtc.session.managers::SessionManagerFMS/receiveError() [C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerFMS.as:288]
  at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/receiveError() [C:\work\ main\connect\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedSe rvices.as:254]
  at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/onMeetingError() [C:\wor k\main\connect\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerAdobeHosted Services.as:93]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.adobe.rtc.session.sessionClasses::MeetingInfoService/onError() [C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\session\sessionClasses\MeetingInfoService.as:347]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/onComplete()

  
  Everyone gets these errors, and if so what do you use instead of Charles?

  Thank you

  timgerr

  Charles generates it is on certificates for each site. That's why you have put in custody and other issues during the test content on SSL w / Charles. The developer has addressed this issue by creating certificates for each browser to accept the certificate of Charles. It cannot solve the problems in the original post, but it will be ceartinly resolution of issues tests sites over SSL w / Charles in general. Refer to the directions below from the Director:

  http://www.charlesproxy.com/documentation/using-Charles/SSL-certificates/

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• Display menu on a display issue high resolution

  OK, so I've dealt with this kind of problem before in other programs by using a high resolution display.  It appears in the latest version of Lightroom that there is a bug with the location that the menus are displayed on the screen (see image below).  in the latest version of Lightroom, it's a non-issue.  I upgraded last night and now I'm having this problem.

  General information

  PC Microsoft Windows 8.1 with all latest updates.

  New version of Adobe Photoshop Lightroom (previous version has not caused the problem).

  The display configuration double

  Monitor 1: Dell U3415W to 3440 x 1440

  Monitor 2: Visio M65 - C1 65 "LED TV at 4096 x 2160

  Please let me know if anyone has a solution or if I need to provide any additional information.

  Best regards

  -Thomas

  Image located here: Dropbox - screenshot 2016-07-23 04.07.47.png

  Hi again once Thomas, Adobe today released a updae:

  Lightroom CC 2015.6.1 and Lightroom 6.6.1

  Update your version of Lightroom

• Problems with the LaserJet M1217nfw MFP - resolution of the Scanner and ADF feeding issues

  Feature: LaserJet M1217nfw MFP

  Connection: Ethernet

  OS: Windows 7 Pro 64-bit

  1st problem: using the TWAIN software, I am unable to change the resolution of the documents I'm scanning. It displays only the 300 and the menu drop-down does not offer any other parameters. It is having to make each document that I scan a lot more big that it must be, and the company I'm downloading of complained them of the overused storage space.  Device MUST be based on the network for the office.

  2nd problem: the ADF is VERY picky. If the paper is inserted at the stop, it will not pick up and will keep scanning out of the original glass. I usually have 2 or 3 times to find the "sweet spot" where it will actually be a new Pick-up analysis.

  I must say, I was very happy with this product when we got it first, the web interface with the drivers loaded on the printer was a great feature and the installation for each machine went very smooth. However, lately this device became more complicated than a time saver.

  Hi SilentbobSC,

  Follow the steps below.

  1. click on settings

  2. remove the checkmark of "Display the dialogue from TWAIN to allow cropping and low sweep"

  3. click on the drop down arrow to adjust your ppp settings

  

• Video resolution issues in Windows Vista

  I have the same problem, as indicated in the Catch 22 - white screen at startup. I can get it up in safe mode, but then it becomes empty as soon as the loading of Windows Vista. I tried the advanced boot low resolution. I get the low resolution, but it resets itself, until I can get to the control panel or the video settings...

  Is there a registry setting that I could change when it is in safe mode? or I could remove that would rebuild itself with the default values?

  Thank you
  John

  Hello

  Try to uninstall the existing video drivers defined that, then the system will default to the standard VGA mode when restarting.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org