Resolution of the external monitor max Intel HD Graphics 3000

Similar Questions

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Help to find the latest driver from Intel HD Graphics 3000 specific material for my laptop?

  I have the latest generic version of my driver VGA, Intel HD Graphics 3000.

  My laptop (gateway NV57H) came originally with a specific version of the pilot material.

  The problem is that when I go on the Gateway Web site to find the latest version of my display driver specific (or any other driver), all the drivers 'later' are dated from 2011-2012. This is probably because my computer is old and is no longer supported, kind of gateway that mind, is no longer adding drivers updated for it.

  In addition, the 'later' video driver for my computer running Win7 64 bit is so old (from 2012) that it is not supported for hardware acceleration on many of my browsers / applications. That's why I decided to get the latest generic driver, which apparently is causing BSOD on occasion when I run Minecraft. Basically, I'm stuck between a get a former working driver that doesn't support hardware acceleration and a new driver glitch causing the BSOD.

  Can you help me find a VGA driver for my laptop model material-specific? I do not know how to find my laptop manufacturer can't stand my computer or its pilots, but I think that it is based on the chipset or something? I don't know how this research and afraid I would probably just install another incorrect driver, please help.

  "all pilots 'later' are dated from 2011-2012... . Gateway is no longer bothers, addition of drivers updated for her... I think that it is based on the chipset or something? "

  Your Intel HD3000 graphics part of your Intel processor.

  The mfg of the laptop is the best place to download drivers and laptops and equipment

  often long a period to support pilot as dedicated graphics cards.

  Gateway (and other hardware mfg) Choose not not update drivers, not because your laptop is particularly old. More because the limits inherent material means that there is probably no benefit from an update.

  My cpu Intel with HD4000 is on a motherboard of 2011/2012 and the update of

  AsRock was November 2012 (I won't call it 'old' for two more years, and then it will be)

  be 'new' for my wife; (D.)

  -However, I welcomed recent updates to Windows Update my HD4000 graphics and have

  had no problems. I would never allow Windows updates near my dedicated, graphics card drivers

  and have never allowed the updates for the HD4000 either, but decided to try it with the

  HD4000 as an experience, but PC motherboards are different from laptops.

  Fortunately a newer driver is not likely to bring an improvement of your HD3000 graphics

  but you can try which allows updates Windows Update your HD3000 as well (in the)

  "Optional" updates).

  Even with the pilot of the dedicated gpu, updates are especially for optimizations of maps in the current series.

  Cards of 'Old' (say three or more back) don't really get a lot of current drivers.

  «hardware acceleration on a good number of my browsers / applications.»

  Hardware acceleration and the need to turn it off is not necessarily due to old drivers.

  I've never found out why, but some machines require it be disabled and others do not, even

  with newer drivers (including the graphics card with the latest drivers).

  I used to keep hardware acceleration enabled, but have it turned off somewhere along the line

  (don't remember why or when, but recently) and have never noticed any restraint in the execution

  browser-based applications. (with my two HD4000 and Nvidia GTX 770).

  Guess that's why I surprised to see that I had turned off, when you look at a minute there... :D

  .

• Maximum resolution of the external monitor on T500?

  I was wondering... my T500 has switchable graphics with ATI 3650. Is it possible to run an external monitor with 1920 x 1080? I am currently running a 22 "Samsung @ 1680 x 1050, but considering the upgrade of the screen on a Samsung 27".

  Advice would be appreciated. Thank you.

  You can run an external LCD to 30 inches with resolution WQXGA using the displayport.

  You can run the FHD resolution on vga or displayport.

• Qosmio X 305-bad image on the external monitor quality

  My x 305-701 has excellent image on the original monitor, but if I connect the laptop to Acer 22 ' VGA cable I get a blurry image on the external monitor only.

  It does not matter if I use two monitors at the same time or just the Acer, the external monitor is always blurred the laptop monitor is always perfect. I tried the external monitor in 1440 x 900 and 1680 x 1050 and have adjusted the frequency of refresh of all available parameters, 59 Hz, 60 Hz and 75 Hz, and the blurred image is still there.

  I love this Qosmio and appreciate it even more on the widescreen monitor any help would be greatly appreciated.

  I know that LCD screens are blurry if set to non-native resolution. I think you need to set the correct resolution for the external monitor. Check your external display native resolution and set in display settings.

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• Need to reset the external monitor resolution in Windows Vista

  Stupidly, I changed the resolution of my new external monitor on my laptop to a not available (single mode external monitor) and received a message on the screen: "out of range" + white screen. No matter how hard I tried, I can't use one external monitor mode and must live with double display (which is a waste of energy on my tiny laptop screen). Could someone tell me please how to reset the resolution setting in Vista for the external monitor?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  You can go to the control panel of the screen and reset it to factory settings.

  And if you face the same problems, then, you must contact your system provider who will be in a better position to help you reset the external screen to its default state.

  As a workaround, so check you have function keys on your portable computer, which can go from a monitor to your laptop and external monitor.

  If Yes, then try to return to the screen of the laptop and turn off the external monitor.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Re: Satellite R630-13F: taken Possible supported the resolution of the external LCD screen

  Hello

  I intend to buy a LCD for my editing work.
  My laptop is R630-13F.

  I was wondering if I get the LCD high resolution (2560 x 1440), my phone would support such screen? Thank you very much.

  Tim

  Hello

  The external screen resolution depends on the graphics card and the external monitor.
  As far as I know the Intel graphics chip that is used in this laptop is capable of managing the max 2048 x 1536 at 32-bit resolution

  2560 x 1440 appears to be too high

• X1C resolution 1600 x 900-> > a higher resolution that is external monitor?

  Hello

  When the X1C description says "resolution 1600 x 900 ' I suppose it refers only to the screen. It will be possible to achieve a higher resolution, I... e 1900 x 1200, with an external monitor?

  Thanks four your answers.
  Best
  Christof

  PS I think exchanging by Thinkpad S1 Yoga to a used X1C.

  Good day and welcome to the community Chrizztof.

  Since you mention the X1C resolution 1600 x 900, I guess you consider computer either a Gen1 / Gen2.

  Here is the detail for each pages:

  Gen1 - Type 34xx
  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1...

  There is support for an external monitor through VGA Dongle
  Maximum external resolution: up to 2560 x 1600

  Gen2 - Types A 20, 7, 20A 8
  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1...

  Just for comparison, here is the link Gen3:

  Gen3 - 20BS, 20BT Types
  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1...

  Max resolution: 3840 x 2160 (Mini DisplayPort) @60 Hz; 4096 x 2304 (HDMI) @24 Hz

  Note that the Gen2 page does not have a specific indication of the external monitor supported maximum resolution. If I find more detailed resources, I'll post them.

  I hope this helps a little.

  Kind regards.

• HP Envy 15t: the resolution on the external display support

  I want to put my HP Envy 15t to drive an external, not as an extension monitor, but rather as my first monitor.  My external monitor is a Viewsonic VX2250, a bit older and I use an HDMI adapter / VGA.  (The Viewsonic also has DVI inputs... not sure it would make a difference.)  On my current tour, I use the monitor in its recommended (or native mode) 1920 x 1080 definition.  I love this screen.

  The adapter is a Bytecc HM-VGA005 and specs seem to indicate that it can handle a variety of video resolutions - Full HD (1080 p), WUXGA (1920 x 1200 mode RB) and UXGA (1600 x 1200-mode VESA).

  15 t is currently shooting in the recommended 1366 x 768 resolution.  If I understand the straight plug, in HD mode it is 1366 x 768 and FHD mode is 1920 x 1080.   The graphics card is an Intel Graphics HD 4600.  Is this the reason why I can't get a HD resolution and not FHD resolution on the laptop?

  But whenever I plug all this together and try and change the settings for screen for laptop, the external screen resolution is only 1024 x 768... pretty ugly.  I have it so that the laptop screen is dark and only the external monitor is on.  But it doesn't seem to be any choice I can do to improve this resolution.  I checked that the graphics driver is up to date and it is.

  What should I do to get the best screen I can on the external monitor?  Would like to buy a new monitor HDMI inputs get better results?  Do I need a different adapter?

  Thank you... Kurt

  Me again!  Well, it was a bit the nut behind the wheel.  I checked with the store that I've been buying my cables, adapters, etc.  He said to the Viewsonic monitor to see what might happen.  As I was put in place, he asked on the power adapter.  I got the USB cable but do not think it was necessary.  But after putting everything together in addition to feeding the HDMI adapter / VGA, I could see, I was getting the resolution I hoped.  Why it worked on the monitor Dell, no idea... maybe a better monitor or other VGA cable.  The Bytecc adpater didn't come with instructions, so I didn't.

  All right.  Hope this helps someone in the future.

  Kurt

• HP Envy X 2 (15-C001dx): HP Envy X 2 (15-C001dx): question seeks to use the external monitor

  I have a brand new HP Envy X 2 (15-C001dx) with Windows 8.1. So far, it works fine by itself. I tried to connect an external monitor to the laptop using an HDMI cable from the laptop to a LG L246WPQ screen. The problem is that 10-15% of the left side of the content portable screen does not appear on the external monitor. Missing from the external display is the word "Start" in the upper left with roughly 2 columns to tiles. This occurs in the two "dual display" or "show only the screen 2" modes.  It's using a resolution of 1680 x 1050 times the cell phone and the LG appearing in support. Using the touch screen on the laptop I can scroll tiles to the right and see the missing columns at the far left. The information displayed on the external monitor begins as far left this screen will be displayed. In other words, there is no black and white on the left box. Except for the missing information on the left side, from the rest of the external display content seems fine. I have updated video driver of the laptop at the latest on HP.COM.  No change in behavior. I tried all the options I could find on the LG OnScreenDisplay, but nothing does the display not better. I've seen complaints on some forums that some "DPI" support added in Windows 8.1is causing many grief monitor for some people. Who would have something to do with it?

  This sounds like a video driver problem?  Something incorrect or incompatible with this LG monitor? Suggestions on other things to try?

  Thank you

  @outback ,

  Hello and thanks for the display on the HP support forums,

  The first thing I would try this question takes the hdmi cable and plug it on another monitor or a TV.

  If the same problem exists then LG issue.  If the same problem occurs on other screens or TV then looking at a resolution problem on the output of the system.

  Even if you can be able to higher resolutions sometimes native resolution will eventually force you to lower it.

  I have two screens at home who can manage resolution 1680 x 1050, however the native resolution is less than that.  and according to what I connect to the screen will depend on what I can get away with.

  Here are some links that you can see and which can be useful.

  Troubleshooting screen HDMI and sound problems

  I checked on the model of monitor you are using, and it seems to have this problem on many different systems.

  LG L246WPQ

  L246WP 24 '' LG display moved to the left driver Nvidia 8.15.11 - EVGA GTX 260

  Here is a list of the problems of google I found.

  The screen shifted to the left.

  I would like to know how this happens.

  Thanks again for posting and have a great day.

• Satellite A-L50-1CU - need info on the resolution of the external display

  Hello world

  It seems an obvious questions, but... could you please tell me exactly the maximum resolution and Hz for the external monitor plugs on this model?
  I need to buy a hi res ips monitor for the edition of photography, and I don't want to pay a lot for something useless...
  Thank you very much
  Marco

  BTW, in the standard memory configuration, can I free memory locations? Or I need to remove the standard memory, substituting it with 2x8GB?

  I don't have this model of laptop, but if it has video HDMI port means that your laptop can offer excellent output video in HD quality.
  In my opinion, you should speak with your local dealer and explain the situation so I hope it can help you choose the best monitor for you. I can also imagine you can take your laptop with you and test it before you buy it.

  According to specification for portable computer, your computer can be upgraded up to 32 GB (4 memory locations).
  To upgrade RAM, you can use the memory modules to follow:
  2GB DDR3L - 1600 - PA5104U-1M2G
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye