Maximum resolution of the external monitor on T500?

Similar Questions

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Resolution of the external monitor max Intel HD Graphics 3000

  Hello

  Inspiron N5050

  Intel HD Graphics 3000

  I'll be able to drive an external monitor via HDMI to a Full HD 1080 p, 1920 x 1080 resolution?

  Hi metalstardust,

  Yes, he'll support it.

  The display resolution maximum of DisplayPort 2560 x 1600, HDMI and VGA.

  Answer please if you have any other questions.

• G560 - maximum resolution and an external monitor?

  Hello

  I just bought a G560, and I use it with an external monitor which can range from 1200 x 1400.

  I don't seem to be able to get the vertical resolution higher than 768... I'm in 1024 x 768 at the moment. 1366 x 768 is the highest mode listed, but as long as my monitor is 5 x 4 and not widescreen, everything seems squashed in this mode.

  I used to have a R51, and it served me well for 7 years. This could go to 1200 x 1400, so I guess with the advancements in technology, my new laptop computer box too.

  What Miss me?

  Thank you.

  I knew that this laptop could do!

  After hours of violin, I have to go to 1600 x 1200.

  The trick was to do a right-click on the desktop, graphics options, output to monitor.

  It was initially set to "clone screens" instead of "monitor". My LCD2170NX 21 "display is also correctly detected, so I can only see the modes that it can display. See below:

  Link to photo

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• Qosmio X 305-bad image on the external monitor quality

  My x 305-701 has excellent image on the original monitor, but if I connect the laptop to Acer 22 ' VGA cable I get a blurry image on the external monitor only.

  It does not matter if I use two monitors at the same time or just the Acer, the external monitor is always blurred the laptop monitor is always perfect. I tried the external monitor in 1440 x 900 and 1680 x 1050 and have adjusted the frequency of refresh of all available parameters, 59 Hz, 60 Hz and 75 Hz, and the blurred image is still there.

  I love this Qosmio and appreciate it even more on the widescreen monitor any help would be greatly appreciated.

  I know that LCD screens are blurry if set to non-native resolution. I think you need to set the correct resolution for the external monitor. Check your external display native resolution and set in display settings.

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• w540: what is the maximum resolution of an external display?

  I have thinkpad w540

  ID:

  20BGCTO1WW

  video card:

  NVIDIA quadro k2100m

  Where, where! He told me the maximum resolution to an external display by using the displayport.

  Thank you.

  Take a look at the specifications:
  http://PSREF.Lenovo.com/PSREFUploadFile%5CSys/PDF/ThinkPad/ThinkPad%20W540/ThinkPad_W540_Platform_Sp...

  The port of Thunderbolt, you will get a maximum of 3840 x 2160 (sometimes called '4K') to a refresh rate of 60 Hz.

• Cannot get T500 to display on the external monitor

  Hello
  I'm running Windows 7 on a ThinkPad T500 (type 2082.BSG), and I'm having problems after have recently updated my display on the Lenovo site software (read the list of installed software, I think that the installation of the software that is the cause of the problem is "ThinkPad features video [AMD switchable Graphics (M8x)] for Windows 7 [32/64 bit] ') version 8.752.4 - 101022 a-107489C-Lenovo). Before the update my computer has guessed what display is active (laptop screen or external monitor) and used the active display. For example, when the laptop is docked and the cover closed he used the external monitor. After the update when the laptop is connected and the lid is closed, I can't display on the external monitor. I have to open the lid and use the Fn + F7 to get the display on the external monitor. Can anyone tell me please what settings should I use to get the old behavior.

  Kind regards

  bostjanv

  The previous is an old post, but as there was no response, and I recently solved the problem, I write in case someone else runs into the same problem.

  After having encountered the problem I restored the factory default driver (which does not show the problem). However, lately I received another message to the effect that it is recommended to install Lenovo "Thinkpad video Features (AMD Switchable Graphics...). ...". I installed the software but the problem described in my original message reappeared. However, this time, the software of (the age AMD) had a "driver update" option and my video material is correctly recognized and the correct driver has been downloaded from the AMD website, after which the problem described in my original post disappeared.

  Kind regards

  bostjanv

• Need to reset the external monitor resolution in Windows Vista

  Stupidly, I changed the resolution of my new external monitor on my laptop to a not available (single mode external monitor) and received a message on the screen: "out of range" + white screen. No matter how hard I tried, I can't use one external monitor mode and must live with double display (which is a waste of energy on my tiny laptop screen). Could someone tell me please how to reset the resolution setting in Vista for the external monitor?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  You can go to the control panel of the screen and reset it to factory settings.

  And if you face the same problems, then, you must contact your system provider who will be in a better position to help you reset the external screen to its default state.

  As a workaround, so check you have function keys on your portable computer, which can go from a monitor to your laptop and external monitor.

  If Yes, then try to return to the screen of the laptop and turn off the external monitor.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Satellite A-L50-1CU - need info on the resolution of the external display

  Hello world

  It seems an obvious questions, but... could you please tell me exactly the maximum resolution and Hz for the external monitor plugs on this model?
  I need to buy a hi res ips monitor for the edition of photography, and I don't want to pay a lot for something useless...
  Thank you very much
  Marco

  BTW, in the standard memory configuration, can I free memory locations? Or I need to remove the standard memory, substituting it with 2x8GB?

  I don't have this model of laptop, but if it has video HDMI port means that your laptop can offer excellent output video in HD quality.
  In my opinion, you should speak with your local dealer and explain the situation so I hope it can help you choose the best monitor for you. I can also imagine you can take your laptop with you and test it before you buy it.

  According to specification for portable computer, your computer can be upgraded up to 32 GB (4 memory locations).
  To upgrade RAM, you can use the memory modules to follow:
  2GB DDR3L - 1600 - PA5104U-1M2G
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

• X1C resolution 1600 x 900-> > a higher resolution that is external monitor?

  Hello

  When the X1C description says "resolution 1600 x 900 ' I suppose it refers only to the screen. It will be possible to achieve a higher resolution, I... e 1900 x 1200, with an external monitor?

  Thanks four your answers.
  Best
  Christof

  PS I think exchanging by Thinkpad S1 Yoga to a used X1C.

  Good day and welcome to the community Chrizztof.

  Since you mention the X1C resolution 1600 x 900, I guess you consider computer either a Gen1 / Gen2.

  Here is the detail for each pages:

  Gen1 - Type 34xx
  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1...

  There is support for an external monitor through VGA Dongle
  Maximum external resolution: up to 2560 x 1600

  Gen2 - Types A 20, 7, 20A 8
  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1...

  Just for comparison, here is the link Gen3:

  Gen3 - 20BS, 20BT Types
  https://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-X-series-laptops/ThinkPad-x1...

  Max resolution: 3840 x 2160 (Mini DisplayPort) @60 Hz; 4096 x 2304 (HDMI) @24 Hz

  Note that the Gen2 page does not have a specific indication of the external monitor supported maximum resolution. If I find more detailed resources, I'll post them.

  I hope this helps a little.

  Kind regards.

• Re: Satellite R630-13F: taken Possible supported the resolution of the external LCD screen

  Hello

  I intend to buy a LCD for my editing work.
  My laptop is R630-13F.

  I was wondering if I get the LCD high resolution (2560 x 1440), my phone would support such screen? Thank you very much.

  Tim

  Hello

  The external screen resolution depends on the graphics card and the external monitor.
  As far as I know the Intel graphics chip that is used in this laptop is capable of managing the max 2048 x 1536 at 32-bit resolution

  2560 x 1440 appears to be too high

• HP Envy X 2 (15-C001dx): HP Envy X 2 (15-C001dx): question seeks to use the external monitor

  I have a brand new HP Envy X 2 (15-C001dx) with Windows 8.1. So far, it works fine by itself. I tried to connect an external monitor to the laptop using an HDMI cable from the laptop to a LG L246WPQ screen. The problem is that 10-15% of the left side of the content portable screen does not appear on the external monitor. Missing from the external display is the word "Start" in the upper left with roughly 2 columns to tiles. This occurs in the two "dual display" or "show only the screen 2" modes.  It's using a resolution of 1680 x 1050 times the cell phone and the LG appearing in support. Using the touch screen on the laptop I can scroll tiles to the right and see the missing columns at the far left. The information displayed on the external monitor begins as far left this screen will be displayed. In other words, there is no black and white on the left box. Except for the missing information on the left side, from the rest of the external display content seems fine. I have updated video driver of the laptop at the latest on HP.COM.  No change in behavior. I tried all the options I could find on the LG OnScreenDisplay, but nothing does the display not better. I've seen complaints on some forums that some "DPI" support added in Windows 8.1is causing many grief monitor for some people. Who would have something to do with it?

  This sounds like a video driver problem?  Something incorrect or incompatible with this LG monitor? Suggestions on other things to try?

  Thank you

  @outback ,

  Hello and thanks for the display on the HP support forums,

  The first thing I would try this question takes the hdmi cable and plug it on another monitor or a TV.

  If the same problem exists then LG issue.  If the same problem occurs on other screens or TV then looking at a resolution problem on the output of the system.

  Even if you can be able to higher resolutions sometimes native resolution will eventually force you to lower it.

  I have two screens at home who can manage resolution 1680 x 1050, however the native resolution is less than that.  and according to what I connect to the screen will depend on what I can get away with.

  Here are some links that you can see and which can be useful.

  Troubleshooting screen HDMI and sound problems

  I checked on the model of monitor you are using, and it seems to have this problem on many different systems.

  LG L246WPQ

  L246WP 24 '' LG display moved to the left driver Nvidia 8.15.11 - EVGA GTX 260

  Here is a list of the problems of google I found.

  The screen shifted to the left.

  I would like to know how this happens.

  Thanks again for posting and have a great day.