Re: Satellite R630-13F: taken Possible supported the resolution of the external LCD screen

Similar Questions

• Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem

  I am the owner of a SATELLITE U200 and I would use it with an external LCD display.

  The external monitor supports up to 1920x1080@64Hz.

  When I select the 1920x1080@64Hz option in the properties of the screen, I get an image enlarged and out of range of the scale. However, by selecting 1400x1050@60Hz seems to work very well.

  My question is: is there anyway I can get the 1920x1080@64Hz option working properly?

  Some info about my following system:

  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  Version of the BIOS Version 3.70
  Video Mobile Intel (r) Express Chipset Family worm = 6.14.10.4631 945GM (* even if intel provides versions of this driver newwer, this is the last custom by toshiba *)

  Intel(r) Graphics Media Accelerator Driver for Mobile report

  Report date: 13/03/2009
  Report time [hr:mm:ss]: 11:24:18
  Driver version: 6.14.10.4631
  Operating system: Windows XP * Professional, Service Pack 3 (5.1.2600)
  Default language: Spanish
  DirectX * Version: 9.0
  Physical memory: 1015 MB
  Minimum graphics memory: 8 MB
  Maximum graphics memory: 128 MB
  Used graphics memory: 14Mo
  Processor: x 86 family 6 model 8 Stepping 14
  Processor speed: 1828 MHZ
  Vendor ID: 8086
  Device ID: 27A 2
  Revision of the device: 03

  _Accelerator Information_
  Accelerator in use: Mobile Intel (r) Express Chipset Family 945GM
  Video BIOS: 1358
  Graph current mode: 1920 x 1080 True Color (64)

  Connected to the graphics Accelerator_ _Devices
  Active monitors: 1
  Active screens: 1

  _Monitor_
  Name of the monitor: Plug-and-Play monitor
  Display type: analog
  Gamma value: 2.20
  DDC2 Protocol: support
  Maximum Image size: Horizontal: 20.0 inches
  Portrait: 11.0 inches
  _Monitor Modes supported: _
  640 x 480 (60 Hz)
  640 x 480 (67 Hz)
  720 x 400 (70 Hz)
  800 x 600 (56 Hz)
  800 x 600 (60 Hz)
  1024 x 768 (60 Hz)
  1024 x 768 (70 Hz)
  1152 x 864 (75 Hz)
  1280 x 1024 (60 Hz)
  1280 x 1280 (60 Hz)
  1440 x 1440 (60 Hz)
  1920 x 1080 (60 Hz)
  1920 x 1080 (64)

  _Display power Management Support: _
  Standby mode: not supported
  Standby mode: not supported
  Active off the coast of the Mode: supported

  _Notebook_

  Name of the monitor: Plug-and-Play monitor
  Display type: digital
  Gamma value: 3.54
  DDC2 Protocol: support

  _Maximum image Size_
  Horizontal: Not available
  Vertical: Not available

  _Monitor Modes supported: _
  1280 x 800 (60 Hz)
  Display Power Management Support:
  Standby mode: supported
  Standby mode: supported
  Active off the coast of the Mode: not supported

  Thank you in advance!

  It s nice that your monitor supports the screen resolution 1920 x 1080, but you should check your owner's manual.

  On page B-4, you will find a list of the supported screen resolution and I must say that the resolution 1920 x 1080 is not taken in charge.
  You can select 1920 x 1440 but not 1920 x 1080.

  Sorry, but the material doesn't supports his screen resolution.

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• Satellite Pro U300: Low resolution on external LCD screen and a station

  I've got Satellite Pro U300 and LCD HP1907v and PA3542E-2PRP - docking station.

  When I connect external LCD for laptop - resolution is OK (1440 x 900). But when I connect the external LCD display in a docking station - the resolution is lower(), I can't change it, and I don't have some display options under Fn + F5 (that I had when I passed this lcd directly to the laptop).

  Help me find a solution, please!

  Yes. Latest Dynadock software must be installed.
  I checked the hardware specifications of the dynadock with DVI-d port and DVI supports a maximum external resolution UXGA (1,600 x 1,200) 24-bit.

• Satellite L505-13F - impossible to activate the wireless connection

  Hello, I have connectivity problems with my Satellite L505-13F.

  I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.

  I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.

  Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?

  Any suggestions?

  Hey,.

  Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.

  In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?

  If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.

  See you soon

• Satellite R630-13U - driver need for the WLAN/BT function key

  Dear Sirs,

  I have problem with my Toshiba Satellite R630-13U

  I have not found any driver for the wireless hot key windows 7 pro 32-bit to be able to turn on/off the wireless or Bluetooth.

  Thank you

  Ayman

  You need to install additional package from Toshiba. Several different tools, this package, and one of them is utility of Flash cards.

  Please install, test and post comments.

• Satellite R630-13F - RAM upgrade

  Hi all

  My R630 is faced with a newly added software for Photoshop (CS5 version). Whenever it is quite slow to open and try to merge the picture for the economy.

  I was wondering if I can upgrade the RAM. With a very limited knowledge, I would like to know if I need to buy an additional (if there is a vacancy for it), or I need to get one to replace the old.

  I think increasing the memory to 4 GB, but I was wondering if it will be enough for Photoshop. Thanks a lot for any input.

  Best wishes

  Tim

  Hey Buddy,

  RAM upgrade is not a problem because it is easy and can be done in a few minutes.

  Satellite R630 has Intel HM55 chipset, and the maximum capacity is 8 GB. This means that you can install 4GB module in each memory location. Also an upgrade to 4 GB is not a problem, you can keep your 2 GB module and just buy a new 2 GB module. The module DDR3-10066 part number is PA3676U-1M2G.

  If you have more questions just after, again :)

• Satellite R630-13F - bootable ISO need BIOS update

  Hello

  I have Ubuntu Linux on my R630-13F.
  There is a known issue with Ubuntu & kernel 2.6.35 and freezing at startup, however the last BIOS 1.80 would have been remedied this. Currently I'm under 2.6.32 kernel to work around this problem, but I would like to upgrade.

  On the global site of Toshiba, the laptop computer sister, Portege R700 has updated the BIOS under various forms, including an ISO bootable. However, it seems here in the United Kingdom, the R630 has only a windows executable and the BIOS itself comes somewhere.

  So, Toshiba can provide me with the format ISO bootable BIOS, or he will run to the breast, say a 'live CD' BartPE Windows XP? I suppose that the latter is preferable, if it works, because then Toshiba must not put any effort, but I don't know how the update process (if, for example, it must store the data on the hard disk and restart) because all you get is an exe file and no documentation.

  Especially I don't want to go through the pain and the time to restore the laptop to windows 7, then re-restoration of Ubuntu.

  Thank you very much!

  > I don't particularly want to go through the pain and the time to restore the laptop to windows 7, then re-restoration of Ubuntu.
  How to install Win 7 on the second partition without erasing the Ubuntu?
  Just do a dual boot ;)

  > So, Toshiba can provide me with the format ISO bootable BIOS, or he will run to the breast, say a 'live CD' BartPE Windows XP?
  It s a friend of a user forum if you need an ISO bios so I ask an ASP in your country who

  Good luck

• Satellite R630-13D: failed to create the recovery disk

  I have a similar problem. I have a Satellite R630-13 t and tries to use the Toshiba recovery Media creator to create restoration 2 DVD discs.

  When you try to create the first disc, I get the following message:

  Cannot read the next file.
  E:\Boot\fonts\chs_boot.ttf
  (Error code: 020150-20-00000000).

  I get a similar message when you try to create the second. I tried four times. On my last attempt, I disabled the protection in real time on my virus checker (Windows Security Essentials) - I don't know how to close down completely, not sure you can. I also turned off wireless and bluetooth.

  I need to create these discs please. I use anti-scratch Philips DVD + RW 4.7 GB 120 Min 1-4 x speed discs.

  I know that someone else mentioned to try a different type of disc but I just bought these for this purpose and don't really want to buy more if I can help it. The disc type is certainly not a problem? When I look at the disc in the drive, they have files on them - even the file that the error message above says that he could not read.

  Thank you
  Ian

  I had similar experiences in the past and I can say that, after several tests using different types of media, I was able to create recovery discs using DVD-R only media.

  Hey two disks empty buddy aren't really expensive so don't waste your time here awaiting a solution and buy two or three empty DVD-R discs and create recovery media.
  Another tip: do not buy some cheap stuf but high quality TDK or Verbatim discs.

• Re: Satellite L550-129 does not support the Toshiba external HARD disk

  Toshiba Satellite L550-129 does not support disk Toshiba store.e canvio external hard.

  Al other portable thosiba in the family meets the canvio store.e and many former protable?

  Why do you think so?
  Drive external DRIVE is not recognized when you connect it to Satellite L550-129?

• Re: Satellite R630-155 - part number for the LCD cover

  My 3 year old belle has hit my R630 on the floor and the plastic LCD casing/lid is now broken. Hinges are fine, the screen is fine - I just need to replace the plastic cover. How find the part number or get a new one?

  Thank you.

  Hey,.

  Here you can get t numbers because it s a forum for owners of Toshiba laptop only. If you can speak with normal people like you and me here.

  If you need these technical details such as part numbers, you will need to contact a service provider authorized in your country. Guys have access to databases of Toshiba and can give you the exact reference and order this part too.

  Good luck! :)

• Satellite A80-P440: is BT supports the A2DP profile?

  Hi, as seen in the title of the post, I have a laptop of A80-P440 and it interests me using the A2DP profile, but I'm not sure at all, this notebook can do? I know it's built-in bluetooth, but I can't seem to connect with the music devices.

  No idea how I can configure the profile, or not at all? Thank you!

  I think that this article is a problem. Latest toshiba battery supports the a2dp profile, download the last stack and then you can add new devices/pair it. Http://aps.toshiba-tro.de/bluetooth/pages/download.php is a link on google

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.