Resolution of the problems in VISTA! Lack of

Similar Questions

• Resolution of the problems installing Vista SP2

  I was wondering if someone who has known Vista SP2 installation problems, involving to reach step 3 100%, then receive an error message and reverting changes, discovered or received a definitive solution?

  Matty J L,.

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  See "installation tips" and "Microsoft support"

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues":
  http://support.Microsoft.com/kb/947366

  "Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005":
  http://support.Microsoft.com/kb/971204

  "Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2:"an internal error occurred while installing the service pack ":
  http://support.Microsoft.com/kb/967818

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• hp4315 is in 22 minutes to print the test page. resolution of the problems of detection without problem.

  hp4315 is in 22 minutes to print the test page.  resolution of the problems of detection without problem.  Using Windows 7 64 bit

  This is caused by the failure of one of your cartridges. I'm not sure that the Officejet 4315 will print with a single cartridge installed, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Vista Aero stopped working. I ran the resolution of the problems, it says dwm.exe does not work...

  However, it is (sometimes) appears in the list when I open the Task Manager. I tried to do a "clean boot" to see whether the problem lies with another program, nothing happens. What I've read, it may be a registry problem.

  Any help or pointer is welcome.

  See you soon,.

  Martin.

  Hello

  The registry is just a database of settings used in Windows. DO NOT use a registry cleaner or
  all the other programs that claim to be able to fix issues as they are powder of snake oil.

  Solve problems with Windows Aero
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  Visual effects Aero Glass in Windows are not working or displayed
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  You may experience issues with the Windows Aero feature on a Windows Vista-based computer
  http://support.Microsoft.com/kb/945000

  ================================================================

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------------------------

  Then update or reinstall the video driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ====================================================================

  If necessary after SFC, CheckDisk, running and upgrading or reinstalling the video driver:

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• I have a problem wiyh my sound output, said the resolution of the problems for drivers which I did but I'm a report code 10 error

  in the device manager it says: the problem is with my audio device high definition and again said that it has an error code 10

  This thread has been created in wrong forum; the moderation of Microsoft team has moved this thread in the forum hardware and drivers.

• resolution for the recognition for vista problem

  I have a problem with the appearance of speech recognition. whenever I open it the program seems very large rather than small as its suppose to look. I tried to play with the resolution and nothing happened. everything else seems fine except for speech recognition.

  Hi memnoch,.

  Thank you for using the Microsoft Answers forum.  I suggest that you check your system for corrupted files.  You use the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, clickStart, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Oblivion, the problems of Vista

  I've installed Oblivion: GOTY edition on my 32-bit Vista system and he plays very well for some time. I have completed the missions of the Guild of hunting, the missions of the magician's Guild, etc. (the game continued for some time, in fact), but at the point where I finally began the mission 'find the heir', the graphics began to go haywire. The effects of spells (such as the fireball, lightning, etc.) would linger long after their expiry date, "follow me", visually alter the landscape around me and lock up the graphics that I went through the landscape of oblivion. This question developed minor irritation of the program crash. Windows would stop and simply close. I contacted the support of Bethesda (the developer), explained the situation and their response was that the game was developed based on Windows XP and Vista was not officially supported. There was nothing they could do. The implicit message that Windows XP was required to play the game.

  I don't buy into this resolution (or more accurately, lack of one). I know that there is a horde of people out there who have played this game successfully beginning to end with Vista. I am sure that this is possible. I am toying with the idea of completely wipe the drive hard drive af all related to the oblivion of the data, and then reload and start again. However, this would nullify all the advances, that I have enjoyed so far. And this still does not guarantee that I will meet again at the same obstacles crashing the game video-related. Now, as frustrated as I am with 'Resolution' Bethesda, it's still a fantastic game and I'd like to see it at its end.

  Any help out there?

  Make sure to have the latest patches from oblivion.  Games Bethesda is known to be buggy and they usually disappear a lot of these bugs with patches.  I don't know if you can start a new game without erasing your old, but I'd be curious to know if this problem is only with your active character or all characters, as you play through the game.  You should, of course, make sure you have the latest drivers installed for your graphics card and if that all works, inspect your graphics card to ensure that the fan is working properly and that you are not overheat your card.  Often graphics problems may occur if your graphics card is overheating or has not enough power.

  Kevin

• Can someone help me with the problem of Vista Home Wireless (unidentified network)

  I recently replaced my wireless router and now I get "Unidentified network - Local access" when you try to connect to my network.

  This problem occurs only with this computer Vista Home.  (All other wireless devices have any problems (Win7 netbook, iPad, PS3, etc).)
  ipconfig/all shows me a valid ip address, subnet mask and gateway also seems to have a Mac address of zero.
  Norton Internet Security was installed, but I have removed and still have the same problem.

  Hello

  Position of your router would be suspicious here. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• Resolution of the problems of performance of MS said there are too many programs running at startup

  I ran MS performance problems resolution and it says I have too many programs running at startup.  Thank you for your help.

  * original title - can say it please, so I can understand, lol, exactly what programs are needed to startup.*

  Hi DjDenizeri,

  You can try to perform a clean boot and then turn on only the programs that you think you have need in the ultility system configuration:
  http://support.Microsoft.com/kb/929135
  I hope this helps.

• Baffled by the problem of Vista activation - no telephone activation option.

  Hi, thought I would come here and pick some brains.  I have a machine in front of me running Vista Home Premium SP1.  It is a Packard Bell PC with a motherboard failed. These cards do not have PB, so I had to buy another kind, and which triggered the activation request.

  So, I ran the Vista product recovery CD after I put the new Board in, and loaded it up.  I had pretty much finished machine yesterday and this morning I got an activation error.  No problem, I thought, but I can't activate the key because it is preinstalled.

  So my problem is this: when I activate the product, I can't activate it online, there is an error.  However, normally there is an option to activate in other ways, such as by telephone.  On this version of Vista, however, this option is missing.

  Can anyone suggest how I can get the phone activation option can I revalidate the license?  I tried everything I know.

  Thanks in advance

  I don't know if you'll be able to activate the license because the recovery CD was for the original motherboard, but:

  The Microsoft Activation Hotline - (888) 571-2048
  Microsoft Activation Centers worldwide telephone numbers - http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx

  MS - MVP - Elephant Boy computers - don't panic!

• Browser, not loading of Web pages. Have tried everything listed in the resolution of the problem, no change

  For these last days were able to load anything within the Firefox browser. No error messages, simply login on the tab page capable of loading on other browsers, but I greatly prefer Firefox.

  Have tried to restart the browser, restart the computer, deactivated the plugins, started the browser in safe mode, uninstalled and reinstalled, reset Firefox, installed any windows updates complete required computer, do analyses, the antivirus scans.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

  You can check if you can start Firefox in Safe Mode by holding down the shift/Options key.

  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Resolution of the problems of El Capitan and Mac Pro GT 120?

  When El Capitan came out, I've updated my Mac Pro 4.1 which has three screens on three GT 120 s.  It was a disaster.  I need three screens and buy new maps for El Capitan is illogical.  Can someone tell me if this has been resolved now?

  Yes, the logging problem with several graphics cards has been resolved in 10.11.3 or perhaps a little earlier.

• Windows Security Center "Computer can be to Rick" warning and problems with the resolution of the problems

  The Windows Security Center warned that automatic updates are not enabled and I don't then turn them on in this window. When, in accordance with the instructions, I try to do it manually through updates automatic/system/board of control, they already seem to be turned on.  Then, when I check the last update of Windows, I get error # 0 x 80070424. I had previously already run complete scans using the Scanner and McAfee after an invasion of last week.

  Hi Joanne B.,.

  You can check if this article helps.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

• Studio hybrid with the problem of resolution LCD TV (HDMI)

  My Studio Hybrid has arrived today. I plug it to my LCD TV (Philips 42TA2800) via HDMI.

  The TV has proposed a recommended 1360 x 768 resolution. The problem is, I couldn't find this resolution under the video control panel. The PC tell me that the optimal resolution is 1900 x 1080, but when this resolution is set, the edge of the desk is not seen (beyond the coverage of my TV). The best resolution I can put is only 1600 x 900, which leaves a black border around the desktop computer.

  One thing, I see that the TV shows 1080i on its screen when I first start the PC and boot Dell log fills all TV. But once the Vista is loaded, it leaves the border around the Office under the resolution of 1600 x 900.

  Pls advice. Thank you.