Oblivion, the problems of Vista

Similar Questions

• Resolution of the problems in VISTA! Lack of

  Cannot find the troubleshooting tool in Control Panel. I typed in the box ("convenience store") in accordance with the instructions of Microsoft... Program to "fix"... Where is he? It can be downloaded? It's terrible!

  Hello

  ·        What fix Ms there are you talking about?

  ·        What are you trying to solve?

  I see that you are using Windows Vista, and in Windows Vista, there is no possibility to solve the problems in the system. This is the reason why when you type address in the start search box, nothing comes.

  This option is available in Windows 7. In Vista, you need to download the fix that is present in the product and run on the system, for example to check the mentioned link (http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems).

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Resolution of the problems installing Vista SP2

  I was wondering if someone who has known Vista SP2 installation problems, involving to reach step 3 100%, then receive an error message and reverting changes, discovered or received a definitive solution?

  Matty J L,.

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  See "installation tips" and "Microsoft support"

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues":
  http://support.Microsoft.com/kb/947366

  "Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005":
  http://support.Microsoft.com/kb/971204

  "Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2:"an internal error occurred while installing the service pack ":
  http://support.Microsoft.com/kb/967818

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Can someone help me with the problem of Vista Home Wireless (unidentified network)

  I recently replaced my wireless router and now I get "Unidentified network - Local access" when you try to connect to my network.

  This problem occurs only with this computer Vista Home.  (All other wireless devices have any problems (Win7 netbook, iPad, PS3, etc).)
  ipconfig/all shows me a valid ip address, subnet mask and gateway also seems to have a Mac address of zero.
  Norton Internet Security was installed, but I have removed and still have the same problem.

  Hello

  Position of your router would be suspicious here. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• Baffled by the problem of Vista activation - no telephone activation option.

  Hi, thought I would come here and pick some brains.  I have a machine in front of me running Vista Home Premium SP1.  It is a Packard Bell PC with a motherboard failed. These cards do not have PB, so I had to buy another kind, and which triggered the activation request.

  So, I ran the Vista product recovery CD after I put the new Board in, and loaded it up.  I had pretty much finished machine yesterday and this morning I got an activation error.  No problem, I thought, but I can't activate the key because it is preinstalled.

  So my problem is this: when I activate the product, I can't activate it online, there is an error.  However, normally there is an option to activate in other ways, such as by telephone.  On this version of Vista, however, this option is missing.

  Can anyone suggest how I can get the phone activation option can I revalidate the license?  I tried everything I know.

  Thanks in advance

  I don't know if you'll be able to activate the license because the recovery CD was for the original motherboard, but:

  The Microsoft Activation Hotline - (888) 571-2048
  Microsoft Activation Centers worldwide telephone numbers - http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx

  MS - MVP - Elephant Boy computers - don't panic!

• problems with vista and microsoft set 32-bit or 64-bit.

  try to solve the problems with vista and microsoft fix it.  This error code 0 x 800400154 came up saying that they finish their using 32 bit and I have a 64 bit what they say.

  What version of the operating system Windows am I running?

  Windows 32-bit or 64-bit

  What Microsoft FixIt you try to run?  (There are MANY of them - they are simply the written scripts that do the manual steps in the KB article for you).

• Causing the problems of internet connection Internet access server

  I have covered a lot of discussions on this issue and have tried all the fixes I found relating to this issue but did not have a chance to find a solution to my problem. I apologize if this is a repeat post, but as I said, none of the questions I found helped.

  ------

  I have 2 laptops (windows 7), 2 xbox 360 s, and smart phones that will all connect to my internet connection with a problem and run great.

  However, I recently bought a PC oriented for the game, and I got this error because I got it.

  I am able to connect to the Internet. Google has always works as Youtube, but youtube videos will stop eventually buffering until I have restart the browser.  Most of the games that I play online will launch and play very well in the beginning, but then they lose the internet connection and not return it until I have close the game and restart it, then it works very well for 5 minutes for an hour, but ends by loses connection again until I got close the game and start it again... However, when games lose connection if I Alt + Tab back on the desktop I'm always connected to the internet and can run my internet browser to always connect to google or youtube... Other sites are also affected (Netflix, Microsoft, Outlook, contraction, etc. all will simply keep the load and eventually tell me 'the site takes long to answer').

  I tried the update of Device Manager, but it says it cannot find the updates for the server to access Internet with yellow Triangle /!

  In the currency manager<><>
  "The drivers for this device are not installed (Code 28)

  To find a driver for this device, click Update driver. »

  When I click on "put updated pilot."

  "Windows was unable to install your Internet access server .
  Windows found driver software for your device.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  However after visiting the Linksys website, the only thing close to that I found was to update the firmware, which I did, but was still does not solve the problem, and I can't seem to find everything related to the Internet Access Service.

  I then tried calling Linksys (router Linksys E1200 series), who directed, I call my ISP, which then make sure that my drivers are up to date.

  At the beginning I was not able to check for an update for access to the Internet Server (all have been 'grayed out' and unclickable).  However after clicking on "Devices and printers" under the start menu, right click router<>

  I tried also to open the command prompt

  I did the "Winsock" fix according to the instructions and an IP reset via the command prompt, always with no success.

  I spent about the last 48 hours trying to get this update with no luck, I finally met a thread with a post that seems to fix the problem for Vista, but I need the version of Windows 7 which has not been registered.  A member of the community had provided a link to download the driver I can't find for the life of me.

  I'm typing this from my laptop (not the PC having problems) and it internet runs fine on this legacy without problems as are all other currencies clung to the same internet connection. The PC in question is the only one that is connected to the router, all the rest are wireless and work very well. (No wireless in the PC with the question card)  If I wired my laptop (with the same Ethernet cable that runs on the PC with the questions) my laptop connects to the internet and always runs very well.

  Any help would be greatly appreciated.

  Hello Dubz,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is your default browser?
  2. What is the brand and model of your computer?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  If you are using Internet explorer as default browser, then please use the suggestions provided in this Microsoft Knowledge base article and check.
  Reference:
  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449/en-GB

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, please use method 2.

  Method 2:
  I also suggest you try the steps in this Microsoft support article and check.
  Reference:
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them

• Still not the problem of 72% during last month 32-bit Vista upgrade to Windows 7 for the month last 32 bit

  Didn't find any solution for the problem... upgrade vista to W7 ATU ATU stops at 72% and only put back the image of Vista may get the computer working again.
  What I have done:
  1. update of the old programs to W7 compatible.
  2. install the latest drivers SATA (compatible W7)
  3. install the latest audio drivers (compatible W7)
  3. uninstalled my antivirus software
  4 uninstalled RealCNC premium
  5 left the command line sfc/scannow to check and repair corrupt files
  6 disabled all Iltimate options
  7 updated my BIOS (Gigabyte - to a (compatible W7)
  8. no installed PowerDVD 8
  9 uninstalled Radiotracker
  10 uninstalled Acronis Home 11
  11 ran the configuration with all disconnected USB devices
  12 removed two chips of RAM (from 4 to 2 GB of RAM)
  13 Ran MSCONFIG hidden in all Microsoft services services and all the other disabled
  14. off in MSCONFIG also all startup items

  Between each element of cummulating, I ran the installation of W7. Even after the last of them, I always get the 72% jump.
  The blue screen says the same thing every time:
  BAD_POOL_HEADER
  Stop: 0 x 00000019

  Instead of update, I tried a clean install and held without any problem. But because of so many applications installed with many specific configurations, I need the upgrade option.

  My system:
  A Core2Duo, Gigabyte motherboard, 4 GB of RAM, two hard drives, about 200 senior applications and lower installed. The system is connected to a UPS APC"Smart-UPS 1500.

  Any ideas that can help me get the upgrade?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  0 X 00000019: BAD_POOL_HEADER
  A pool header problem is a problem with the allocation of memory for Windows. Device driver problems are probably the most common, but it can have various causes, including defective or other writing problems disc and problems with some routers... [Source: http://aumha.org/a/stop.htm]

  See also: http://msdn.microsoft.com/en-gb/library/ms793223.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I solve the problem of the graphics in the game on vista?

  I have the game MA FIA and I played it on my previous Vista Machine without any problem. On this brand newmachine vector graphics of the game and
  explode in all directions, which makes the game impossible to play. How can I fix it? I bought my first machine the day before vista came out in the hope of
  get a XP machine, but it is automatically updated to vista. So I'm sure it was a first version (32-bit probablym... I can't say now, the motherboard is fried)

  Its a new computer brand spankiing
  with Vista Home Premium 64-bit

  Any help? I love this game

  frucstrated,
  Thanks for posting on the Microsoft answers Forum.  First I would make sure your video card drivers are updated.  I know it's a whole new machine, but it is always good to make sure you have the latest version of the driver.  Then can go to the game icon and then right-click on it and select Properties, then the Compatibility tab and then check the box run in compatibility mode.  I would suggest trying to run in Windows XP (SP3) mode first and see if that helps.

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "unknown software exception (0xc06d007f) occurred in the application at location 0x755de124." Vista Home Premium SP2, the problem occurs during execution of Word (Office 2007), Adobe Acrobat 9 Standard, IE8, AIM.

  Running a HP with an AMD Phenom 9750 X 4 64-bit.  When you run Acrobat with Word (IE and PURPOSE in the background), the computer began to freeze.  The cursor shows the ring to turn for a few minutes, then who stops too.  CTRL-Alt-Del does not work.  Finally, the error message above appears, I click OK and it closes the program that is on top of the Office at that time.  The error message appears again (same message), and the computer crashes completely.  The only thing that can be done at this time is to restart the computer.

  This problem happened after three months ago, and nothing until yesterday, when he arrived about 8 times.  This could be the cause?  All thoughts/possible solutions?

  Help!  and thank you!

  scurvyturbo

  Update: now, the computer froze just on a full white screen, and everything I had opened a window of Firefox, it was.  Don't know what that means...

  You use Sharepoint?  This error seems to be frequently associated with users who use this app.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Try to use all the applications above except IE8 and see if the problem persists.  I read a few posts that suggest that this may be an IE issue (or somehow related to IE - especially when it is run with a desktop application).

  Let's try a clean boot to see if some 3rd party application is causing the problem.  Here is the procedure: http://support.microsoft.com/kb/929135.  If things are smooth with the boot so it's a process of elimination to identify who did respoinsible for the problem by following the procedures described in the above link-, but we will know THAT we nailed it, and it's only a matter of time before you find the source (then we can decide what to do about it - uninstall or try to find a solution in order to continue to work).  Don't forget to put in normal operation when you are finished.

  I hope this helps.  Please post back in all cases we will know what happened (and maybe can come up with other options to try).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My Acer 5315-2153 too heated and stops frequently. I have Windows Vista and Windows 7. What is the problem? If this is the case, how can I deleat Vista?

  The original Windows program was Vista.

  Hi Allen,.

  Thanks for posting this question in the Microsoft Community.

  I'll help you find a solution to the issue. Before we begin, I have to ask you a few questions.

  1 how long have you been faced with the question?

  2. you have any security program installed on the computer?

  3. the problem occurs on OS?

  4. are you aware of any recent software or hardware on the computer changes?

  Search for the exact error message you get to do this in the Event Viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can start the computer in safe mode and perform a clean boot. Clean boot helps eliminate any conflict of third party software.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Here is another article on improve the performance of Windows Vista.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• I have the problem of error 815 in vista broadband

  I have problem of error 815 in vista broadband.pls someone give me a solution__

  The 815 error code means that the network connection to broadband could not be established on your computer because the remote server is not responding. In addition, I notice that the connection was going well for a few days and broke all of a sudden. In this case, I suggest to contact your Internet provider (ISP) to check first the question.

  If the connection can be established using another device/system, please create a new administrator account on the Windows Vista-based computer to solve the problem:

  1. click onStart , type the user account and click on the user accounts Control Panel.

  2. in the user account control panel, click onaccount manager another .

  3. click oncreate a new account , type an account name, select administrator , and then clickcreate an account .

  4 logout and login with the new account and establish the connection to check if the problem persists.

  I hope this helps!

  Brett M.

  Windows outreach team