Resource booking reports Exchange room

Similar Questions

• MCU bridge (e) reserved as a resource via MS Exchange

  Is it possible to create a static bridge and make a resource Exchange. Then have TMS detects the resource as a bridge and the regular termination points added this bridge?

  Thanks in advance.

  Sent by Cisco Support technique iPad App

  No, if you use the Extension of the TMS for Microsoft Exchange, you do book endpoints (and the content servers). Microcontrollers are automatically added by the TMS routing logic (using the default values specified under administrative tools > conference settings), and there is no way to add a bridge as a resource in Exchange.

  Kind regards

  Kjetil

• Recommendation/resources (books, examples) for NI Vision

  Hi all

  After a few days I tried to learn and to do some very basic projects (video) using NI Vision and its does not too well, in part because I have no image editing experience or background. I would like to know if there are some resources out there for beginners. I found a book "image acquisition and processing with labview", but it is intended for more experienced users. Any suggestions are greatly appreciated.

  Hello odessy27,

  For a book of general image processing, try Image processing: Fnndamentals The.  To get examples of LabVIEW and IMAQ using, you can take a look at our examples for shipping.  Any window of LabVIEW, see help > find examples.  Then navigate to hardware input and output and IMAQ.

  Thank you

  Lisa

• Filter by book reports

  Currently looking for a way to segment information and books seems to be the best way to achieve this. I tried to change the book selector after creating a simple report custom as well as the report continues to return all accounts as opposed to those which were correlated with the requested book. Is there a way of 1) to create a report that displays only the results of a certain book and 2) to create a report that excludes a certain book.
  
  Thanks in advance.
  
  Published by: 897795 on November 17, 2011 07:46

  momran, here's my email [email protected] send me one, I'll send you the file.

  Published by: Royston Goveia on November 29, 2011 01:43

• Create a custom resource account report?

  Is it possible to create a statement of account personalized IOM instead of use the off status of the box (for example configured, enabled, disabled, etc.)?

  I want to set up a new status of the object and use it when a certain task of process is completed successfully.

  

  I found a blog post that illustrates this:

  Oracle Stack: IOM statement resource custom

  Hope that helps!

• The host system resources / booking via PowerCLI

  Hello chaps,

  Does anyone know if it is possible to adjust the CPU and the memory that is reserved for a host via PowerCLI?

  (Home > Configuration > Allocation of system resources > edit)

  I usually affect the reserve memory 800 MB and CPU 800 MHz according to the design best practices.

  Thank you

  
  Dan

  As far as I know, there's no cmdlet for this, but you can use the UpdateSystemResources method.

  You just need to know that the key to the Scriptures "host/system".

  $esx = Get-VMHost MyHost 
  
  $spec = New-Object VMware.Vim.HostSystemResourceInfo $spec.key = "host/system" $spec.Config = New-Object VMware.Vim.ResourceConfigSpec$spec.Config.cpuAllocation = New-Object VMware.Vim.ResourceAllocationInfo$spec.Config.cpuAllocation.reservation = 800$spec.Config.memoryAllocation = New-Object VMware.Vim.ResourceAllocationInfo$spec.Config.memoryAllocation.reservation = 800$spec.Config.ChangeVersion = $esx.ExtensionData.SystemResources.Config.ChangeVersion
  $esx.ExtensionData.UpdateSystemResources($spec)
  

• Great book report auxiliary of the Exceptions - query

  Currently, my client runs the report, copy the output to excel and then places commas between each receipt number to run scripts. What is the msec, which is used to generate the report? I want to write the numbers directly in a comma-delimited file.

  If you go through the responsibility of the Director of XML and data definitions, there may be several placeholders to fill.
  Instead, you can enable the debug indicator, so that you can get the report query / sql in the simultaneous log file.
  1. go to the application developer
  2 locate the concurrent program
  3. click on the settings button
  4. research P_DEBUG_FLAG
  5. Add if it is absent, name the token as "DebugFlag" (do not change the case) with the value defined as any YES_NO
  6. default as the parameter or Y displayable and pass like Yes.

  Get the sql code and change it to run separately.

  By
  VAMSi

• EPM 11.1.2.3.500 - book of financial reports error:; nested exception is: java.lang.NullPointerException

  Hi all

  We have up gradation of EMP 11.1.2.3.500 11.1.1.3.

  We have financial reports book for HFM.

  When we right click on the books and select 'complete book as PDF', we get after that error

  "the nested exception is: java.lang.NullPointerException.

  

  

  any idea?

  Kind regards

  Dattatray - Mate

  Hello

  We have solved this problem as follows,

  1. open this book report

  2 remove the reports within the book.

  This is how it works for us

  Kind regards

  -Matt Dattatray

• Regarding the Unlimit tab in memory/CPU resource

  Hello

  Could someone please explain to me why this "Unlimitied" box is provided for the CPU and memory in the Allocation of resources for Vm. If I have 1024 MB memory and 1 VCPU were awarded and the unlimited check what will this affect?

  Thank you

  Amit

  Amit,

  A virtual machine is always limited by the overall maximum configured for him.

  The limit in this user interface control and physical resources booking max virtual machine can use. For example a virtual machine allocated 1 GB of RAM with a 512 limit cannot get more than 512 MB of physical RAM that is so necessary, 512 balance will come from Exchange. When a limit is not set, it could potentially use all available RAM up to its max physical memory config

  Hope that helps

  Méhul

  PS: If you find answers correct or useful, please consider giving points!

• Commissioning for lack of Exchange because of the latency in Multi Site domain controllers

  Hi all

  I use using the OIM 11 g R2 PS2 BP04 with AD-connector version (11.1.1.6.0 & AD 2010) and the Version of the Exchange Connector (11.1.1.6.0 & Exchange 2010) and its installed on RHEL 6.5. We have 20:00 domain controllers and each of them is in a different site. Here is the list of domain controllers:

  DC-host1,DC-HOST2,DC-site2-host1,DC-SITE3-host1,DC-SITE4-host1...etc

  We use automatic configuration AD access strategies and resources the user Exchange and configured as domain controllers in AD IT resource:

  DC-HOST1 - primary

  DC-HOST2 - secondary

  AD resource provisioning works fine however when IOM tries to configure exchange to the user, its failure due to the latency issue b & w AD different Site of the domain controller. For example, "PRODTESTUSER12" is implemented successfully in AD and when IOM tries to configure exchange for this user, exchange server search for any available domain controller search for the user. It randomly selects an AD domain controller, I say DC-SITE2-HOST1 to search for the user. Since this domain contorller is on another site and it is latency, its not able to find the user of this domain controller, this is why available exchange fails for this user. See the below error:

  Target class = oracle.iam.connectors.icfcommon.prov.ICProvisioningManager

  < 21 may 2015 23:10:06 CEST > < error > < ORACLE. IAM. CONNECTORS. ICFCOMMON. Prov. ICPROVISIONINGMANAGER > < BEA-000000 > < oracle.iam.connectors.icfcommon.prov.ICProvisioningManager: createObject: error while creating user

  java.lang.RuntimeException: the operation could not be performed because the object 'PRODTESTUSER12' could not be found on 'anc-dc2k8 - 01.wssc.ad.root'.

  We have not specified this domain either under AD controller or Exchange resources.

  n Connector logs, I can see below: 22/05/2015-10:55:19 < INFORMATION >: class-> Org.IdentityConnectors.Exchange.RemoteRunspaceInstance-> InvokeScript method, Message-> enter the method

  
  22/05/2015-10:55:19 < VERBOSE >: class-> Org.IdentityConnectors.Exchange.RemoteRunspaceInstance,-> InvokeScript method, Message-> Script: Set-ADServerSettings - ViewEntireForest: $true; Get-User "PRODTESTUSER21" - ReadFromDomainController

  I think, because of this script, Exchange Server recovers first of any domain controller available to search for the user. Yes, is there a way to restrict or put domain controller's favorite?

  

  There is a hotfix available for this problem. Here are the details:

  Patch 19692488: APPLICATION of MERGER on top of 11.1.1.6.0 FOR the BUGS 18310438 19478076

  Bugs resolved by this fix

  UPDATED EXCHANGE CONNECTOR SMTP PRIMARY ADDRESS 16813315 PROBLEM

  17949931 DELAY IN EXCHANGE / COMMISSIONING

  19478076 WITH REGARD TO THE EXCHANGE OF SUPPLY FAILURES.

  Concerning

  Suren

• books database connection

  Hello

  We give a to a report at its inception db connection... when a book is created from the reports... we need to give a db connection exclusively... when books reports are migrated to the environment diff... do we need give books exclusively db connection

  It gets the information of connection of reports (EN)

  Concerning

  Celvin

• Good resources on Oracle BPM Suite 11 g

  Hello
  
  I have a good knowledge, but also work experience on SOA & Oracle SOA Suite 11 g.
  Now, I've decided to learn Oracle BPM Suite 11 g.
  
  Would you please suggest me the best resource for this.
  I started going through Oracle BPM Suite 11 g manual. The book is good, but I just want to know if there is another resource/book is better than that.
  
  Concerning
  RaviKiran.

  I think you'll find "Getting Started With Oracle BPM Suite 11 g R1: a tutorial" to be most useful as you're getting started. The only problem with it is that it was written a few years ago using 11.1.1.4. Some of the screenshots is different in the current version and it does not include the new features added in the 11.1.1.5 feature pack.

• Operate the deployment of reports 7 to Siebel 7.8

  Hello
  
  Y at - it a document that can help me to deploy files, Actuate in Siebel application?
  
  Its urgency.
  Help, please.
  
  
  
  Thank you
  Asif

  Asif,

  Please check the doc below:

  http://docs.Oracle.com/CD/B31104_02/books/reports/ReportsTOC.html

  Thank you

  Wilson

• New ID: need training manual/book recommendation?

  I have worked in Illustrator and Photoshop and now I must quickly learn the ID for a project.  Please suggest training resources (books, videos, etc.).

  Thanks in advance,

  John

  Bob & Steve,

  Thank you for the quick suggestions and in due time.  I'll check.

  John

• Help please with Script report :(

  Hello
  
  I am trying to write a small report with a calculation script and would really appreciate some help.
  
  Ideally, I would like to create a report where I only get the account and the value. I select all my limbs, but I need a calculation on the entity dimension. Here's what I'm trying to achieve:
  
  (All selected members for all entities + all members for all entities in the RIA - IFRS REPORTING ADJS group.) Yes I'm duplicate members of the RI group - IFRS REPORTING ADJS.
  
  Count to 100 for all entities = 50
  account 100 for all entities in the REPORTS of RI-IFRS ADJS. = 25
  I want to display grouped 100 as 75 account without showing a line for each entity.
  
  That's what I have so far but it does not work well:
  
  
  {
  ROWREPEAT
  SUPCOLHEADING
  SUPCOMMAS
  SUPHEADING
  SUPBRACKETS
  SUPEMPTYROWS
  TABDELIMIT
  MISSINGTEXT "#mi".
  2 DECIMAL PLACES
  NOINDENTGEN
  }
  
  < PAGE (years, Version, currency, script, intercompany, 'Entity', 'Cost Center', 'set of books', 'Reports')
  "FY10" 'In progress' 'Currency' "real" "intercompany" 'Entity', 'Cost center' "AB_CON_USD'"Reporting ".
  
  < ROW ("account")
  < LINK (< DESCENDANTS ("Balance sheet Total accounts", "Lev0, account"))
  {CALCULATE the LINE 'Entity' = 'Entity' + "RI-IFRS REPORTING ADJS."})
  
  < COL (period)
  "Dec".
  !

  Have you tried to use & CurrQtr instead of @CurrQtr

  variables substitution = & NomDeLaVariable

  See you soon

  John
  http://John-Goodwin.blogspot.com/