ResourceManager with kidnapped child view stack

Similar Questions

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• a macbook pro will grow with my child...

  I am considering getting a MacBook pro for my household. These are not cheap, so it will be an investment for me. I mostly use this for photos, household management, etc. most of use will come from 8 years. It is really in minecraft and is eager to start creating their own videos. I want to know if I invest in a MacBook pro if it will grow with my child as possible in his high school years? I hope that this could possibly him lasted until College. Thank you.

  What is your definition of 'if it will grow with my child? Hardware MacBook Pro cannot be improved, except perhaps for some third-party flash storage. You can expect the computer to have a useful life of 5 years. I am sure that, at the time wherever your child gets at school or College, there will be new applications and technology that will not support your old computer.

• Error when you try to view the image with Microsoft Photo Viewer: COM Surrogate has stopped working

  When I try to post a picture (JPG) with Microsoft Photo Viewer, I get "COM Surrogate has stopped working"

  I don't have Nero or DivX installed, which is what all the forums seem to indicate the cause of the problem.

  Can you suggest anything?

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  The above information on the problem is explained in the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Everything opens with Picasa Photo Viewer

  Original title: questions

  Dear Sir/dear Madam, I changed some folder of image files to open with the picasa Photo Viewer, but it shows its an invalid image, later all softwres like windows Explorer, windows media, internet Explorer player are opens with picasa Photo Viewer! Why is happened like that, how to get rid of this problem?

  Run this should solve the problem of the association where Picasa Viewer works http://support.microsoft.com/kb/950505

• Impress us with number of views/sales on ACE

  Hello everyone!

  Are there people who can impress us with number of views/sales on ACE?

  I have just 54 accepted, more photos in review mode, but no./zero views not to talk about sales. )

  Hello sanderl90906377,

  Thanks for writing. I can't share specific numbers with you thought that I can tell you that there are many contributors, earning a significant income by Adobe Stock. I'll tell you this, you will get out of it what you put into. My recommendation while you are getting started is to focus on the creation of content and presentation. Be diligent with Keywords to ensure that your images are seen. It takes time to build your porftolio but once it happens, if your content is good that your sales will come.

  Good luck!

  Mat Hayward

• Can I use a custom with iSCSI TCP/IP stack?

  We have a group of 3 guests identical at each connection to the network through 2 natachasery using 2 vmks SAN. Each vmk resides on a separate broadcast domain so they belong to separate vswitches. No link is used in accordance with the guide of vSphere.

  Thus, as the title suggests, should I use a separate TCP/IP stack custom for iSCSI vmks? or leave them in the stack by default (even if it is not an option to mark the vmks as IP storage)

  As long as your vmkernel iSCSI cards and their respective iSCSI targets are in the same subnet of layer 3, i.e. you are not routing iSCSI traffic (vmkX<->TargetSPX vmkY<->TargetSPY separate subnet design iSCSI does not, apply as never before the traffic is routed between networks), OR you do not want to configure static routes customized for iSCSI targets in other subnets then there is no point in using a separate TCP/IP stack.

  The main point to use the new functionality of ESXi 6 with several TCP/IP stacks is to have a completely separate battery routing table. Most of the admins were not able to handle very basic layer 3 static routing with itineraries dedicated by subnet, so they assigned default gateways on several vmkernel NIC and I wondered why things broke or has never worked.

  It also allows better control what interfaces to send data when you have several paths of layer 3 or subnets to communicate with, but it's largely irrelevant and already a point an integral part of an iSCSI network fine grain.

• Composition Widget - make a the first picture shown a particular thumbnail view stacked

  Someone knows how to do a special thumbnail of the first image shows a view stacked? I have dozens of thumbnails square, arranged from left to right, top to bottom and all their targets next to this block of thumbnails in a stacked view. When the site is loaded, the first thumbnail to show is the 7th thumbnail! How to make the first thumbnail in the block of the first to show when the page is loaded?

  What describes Brad, this is how it is supposed to work.

  How is the site being downloaded (via publish, upload to FTP host via an external FTP program)?

  What are the options set for the widget of Composition? (Display of a screenshot is easier).

• all my scans pdf open with windows photo viewer, which can take to see in Adobe Reader?

  all my scans pdf open with windows photo viewer, which can take to see in Adobe Reader?

  Did you create PDF files?

• How to set up a second monitor with a different view than the one on my laptop? [was: ron]

  I'm trying to set up a second monitor with a different view than the one on my laptop.  I have a HP Pavilion dv5 laptop and a secondary monitor View Sonic UP2365-LED.  They are connected with a cable 15 pin... my only choice on the laptop.  When I select the second monitor, it displays a box of a second on my laptop and the secondary monitor.  My pointer moves on both screens at the same time, no matter what display, I select the monitor 2.

  It depends on the whther the laptop can support both points of view.

  Somewhere with the right button on the desktop, choose "screen resolution" and that there should be only a drop down menu entitled "multiple displays".  Looks like you have "displays a duplicate" choose (if it will leave you) "to extend these screens.

• Unable to show offline folios on ipad with Adobe Content Viewer

  I am suddenly unable to view folios offline on my iPad with Adobe Content Viewer. Here's the folios, that I could see 2 days ago. InDesign update, reinstalled the viewer of content, tested on 2 computers with available 2 iPads and 2 different cables. Everyone knows about this problem?

  It is a known issue, please visit http://status.adobedps.com/ for updates.

  Neil

• Child parsing JSON with datasource and view in listview

  Hi, I use datasource to get json from url data and I want in the listview, but json data have child, so I don't know how to access.

  My data source code here:

  DataSource {
          id: serviceDataSource
          source: "http://services.okezone.com/json/headline"
          type: DataSourceType.Json
          onDataLoaded: {
              serviceDataModel.clear();
              serviceDataModel.insertList(data)
          }
      }
  

  And here my display list code:

  ListView {
            dataModel: serviceDataModel
            listItemComponents: [
  
                 ListItemComponent {
                        type: "news"
                        ServiceDetail {
                               title: ListItemData.title
                               pubDate: ListItemData.published
                        }
                 }
            ]
   }
  

  And here is the response from json to this url:

  [
  
  {
  
    "okezone": {
  
       "version": "0.1",
  
       "headline": {
  
          "request": {
  
             "channel": 0,
  
             "start": 0
  
          },
  
          "status": "OK",
  
          "more": {
  
             "offset": 2,
  
             "start": 0,
  
             "total": 2
  
          },
  
          "news": {
  
             "type": "2",
  
             "id": "796135",
  
             "channel": {
  
                "id": "519",
  
                "label": "Surabaya"
  
             },
  
             "published": "2013-04-23 13:21:25",
  
             "title": "Gara-Gara UN, Mendikbud Didesak Mundur",
  
             "summary": "Para orangtua murid menilai, Mendikbud, Muhammad Nuh, harus bertanggung jawab di balik kesemerawutan sistem dan pelaksanaan Ujian Nasional.",
  
             "thumbnail": "http://img.okeinfo.net/images-data/content/2013/04/23/519/796135/BkuPxui4gB.jpg",
  
             "url": "http://services.okezone.com/json/detail/2013/04/23/519/796135"
  
          }
  
       }
  
    }
  
  }
  ]
  

  Thanks for your help, I do it in two days and does not work.

  Hello

  Try this code

  import bb.cascades 1.0
  import bb.data 1.0
  
  Page {
      content: Container {
          Label {
              text: "List View with json parsing"
          }
  
          ListView {
              id: listViewDemo
              dataModel: GroupDataModel {
                  grouping: ItemGrouping.None
              }
  
              listItemComponents: [
                  ListItemComponent {
                      type: "listItem"
                      StandardListItem {
                          title: ListItemData.okezone.headline.news["title"]
                      }
                  }
              ]
  
              function itemType(data, indexPath) {
                  return "listItem";
              }
          }
      }
  
      attachedObjects: [
          DataSource {
              id: serviceDataSource
              source: "http://services.okezone.com/json/headline"
              type: DataSourceType.Json
              onDataLoaded: {
                  listViewDemo.dataModel.clear();
                  listViewDemo.dataModel.insertList(data)
              }
          }
      ]
  
      onCreationCompleted: {
          serviceDataSource.load();
      }
  }
  

  Don't forget to add the library to .pro file

  LIBS +=-lbbdata

  

• Problem with the Toshiba bluetooth stack

  Hello, I'm having a problem with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I got a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After the upgrade to windows 7 my bluetooth mouse is not working any more and it is not listed in the list of devices. But, when I turn on my mouse, the system battery bluetooth bar turns green as when the device is connected, but it does not work and the device is still not listed. I'm trying to redetect, but it is not detected. I tried to uninstall and reinstall the bluetooth stack, but in the reinstalling my devices are always listed.

  Can someone help me or tell me how to manually remove all connected devices? Thanks in advance.

  You have selected the option to remove all device configurations?
  If not, then please try it and then reinstall the Bluetooth stack.
  You can also do this via command line.
  Just run the following command as an administrator:
  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / qn DELETEALL = 1

  In addition, remove the batteries from the mouse for several seconds.

  Right click on the Bluetooth system tray icon > Options... > Security > view paired devices
  Remove your entry for the mouse device when it exists.

• Child view attribute - Instance of undefined problem or view not found

  Hello!

  I was following a line example in creating a master page / detail in jdeveloper/OPS. Everything was going smoothly until I reached the stage where I'm to define a master table region (Style of the region: advancedTable). In the section of BC4J, he lets me pick my masterVO1 in the list (in collaboration with detailsVO1, detailVO2) but it gave an error when I push on the choice in the attribute of child mode - display attributes can not be recovered. View not found or indefinite instance.

  I defined in AM my opinion forums (masterVO1, detailsVO1, detailsVO2) and the view binding instance. What do you think went wrong?

  Thank you.

  Jon

  Hello

  You can try to skip this part.

  Just add:

  View instance, view detail and ViewLink attribute.

  BR, 906099

• Form of the ADF for data structure with several child records

  Jdev version: 11.1.1.2.0
  
  I have a data structure with a one-to-many parent-child relationship. I give an example of the data structure.
  
  Employee table:
  ----------------------
  EmpId
  EmpName
  Salary
  
  Table Historiqueemploye:
  -------------------------------
  EmpId
  Previous_Employer
  From_Date
  To_Date
  
  
  In the ADF form for entering data for a new employee, I want to give a layout (say, a button "Add row") for the history of the employee's employment. How can we succeed in ADF?
  
  I'm new to ADF. Would be grateful if someone can help me with detailed steps or a link showing such a demonstration.
  
  Thanks in advance.

  Hello

  If you exposed a View for the Historiqueemploye table object, then simply drag this point of view as a form and then drag and drop the create operation (within the structure of the View object in the data control palette) as a button for the new line is created. If you do not always display the historical, add it to an af:popup and start button context menu create or hide the af: panelFormLayt that a form is added by default.

  Frank