Respond.min.js does not: IE7, IE8

Just a note for any of you who read this post earlier - ensure that queries the css with @media is not loaded using @import or respond.min.js will not work.

Which is also mentioned in the documentation of respond.js here:

https://github.com/scottjehl/respond

Anyway, @import is better avoid because it is.

Tags: Dreamweaver

Similar Questions

  • Mini Displayport does not not on the new Best Buy Yoga 14 (Yoga 460)

    Yesterday, I bought one of the brand new 14 Yoga from Best Buy, the one with the stylus, which is basically a 460 yoga.

    Mini Displayport does not work. Hook up a monitor makes the system to hang for about 15 seconds, and no screen is detected.

    All Windows and Lenovo software are up to date.

    I use a Mini DP--> HDMI adapter, but I've never had problems with it on other computers.

    I have ordered another cable converter and will try that tomorrow.

    Lenovo is aware of this problem? Is there a solution?


  • Mini Bridge does not properly

    Mini Bridge does not properly; said the bridge should run but the bridge is running and mini Bridge never load

    Hi Margot,.

    Mini Bridge is created on a former technology based on Flash, which is currently not supported for future versions. Mini Bridge support will be removed in the Future of the Bridge and InDesign version.

    Thank you

    Deepak Gupta

  • Mini Bridge does not

    Mini Bridge does not; say waiting for bridge run... But the bridge is up and running correctly

    Double discussion: https://forums.adobe.com/thread/2205273

  • I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the ProX1 op

    I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the option ProX1.

    Hi Carl,

    It seems that you have installed Acrobat XI pro as an upgrade and an upgrade you will need a serial number for a product older Acrobat X, etc. 9:

    See, error: "this serial number is not for a product calling it" | Adobe Creative Suite

    Also, I checked with your Adobe ID on the forums and I can only locate XI of Acrobat pro upgrade recorded, please check if you have registered an earlier version of Acrobat on some another email to get this serial number.

    Let us know if that helps.

    Kind regards

    Sandrine Bani

  • Mac Mini blocked, does not respond to the keyboard

    So, we have a mac mini since 2006. Since 2007, he has 24 hours a day.

    Now it has crashed, and while restarting it seems to be stuck at the gray screen with the apple logo.

    The circle under it is moving, it seems that it is still starting.

    I tried all kinds of different key combi any reboots, but nothing seems to work. Even the light caps lock does not work on the keyboard.

    Have you tried to dismantle the mini and put back together. No luck.

    Can someone tell me what is happening? Would appreciate your help!

    Best guess would be a failing hard drive. You can try to boot from the original CD/DVD comes with your Mac or DVD for an improved version of OS X, run disk utility to repair the internal disk partition.

    Note: It is advisable to restart your Mac on a regular basis as opposed to she works 24 hours a day for 8 years.

    It also helps to provide as much information as possible on your Mac. There are 4 different models MacMini that can be described as of 2006, and you do not identify the version of your OS X.

  • Empirix et Suite 8.1 refuses to install (not IE7, IE8 needs)

    Hello

    We use Empirix et Suite 8.1. Empirix is no longer support the product and directed us to Oracle. Setup fails because he expects IE7. But our new server has IE8. Setting compatibility mode for IE7 IE8 does not solve the problem.

    Question 1: Is there a update of Empirix et Suite version 8.1 which is compatible with IE8?

    Question 2: Can I still use the license file, we had with Empirix with an update released by Oracle?

    Thanks in advance for any help.

    Hello

    Question 1: Is there a update of Empirix et Suite version 8.1 which is compatible with IE8?

    The version of ATS (Application Test Suite) known as et Suite during the days of Empirix support IE8 is 9.0 + 8.1 does not support the IE8

    Question 2: Can I still use the license file, we had with Empirix with an update released by Oracle?

    If you paid maintenance you have right to upgrades and support you can use 9.01, which is the latest achievement, note that Oracle does not use license files to monitor the use of its software, so you can download the software and run it, but you have always linked to the oracle license.

    You can download 9.01 of [here: http://www.oracle.com/technology/software/products/app-testing/index.html]

    Concerning

    Alex

  • Mac Mini - Finder does not open

    I have a Mac Mini with os x 10.10 2014.  The boot disk was almost full and the finder does not open.  I open the iPhoto and deleted the pictures and then empty the trash in iPhoto.  By logging in as a different user, I see I have ~ 1 GB of space, but when I log on my main account and admin the finder does not always open.

    I read that it was a known issue:

    http://forums.MacRumors.com/threads/Finder-doesn.

    It is said to remove the .plist files, but I can't get to Terminal to do.

    Please advise, thank you!

    Edmund

    If you were able to connect as another user, the issue is not lack of storage - this is the same computer.

    Yes, your .plist file may be corrupt, or you could have an extension conflict that affects only your user account.

    Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

  • My original opening on a new Mac Mini installation does not work. I have the series or available

    Opening 1 and implemented to date are installed on a MAC Pro: 2 x Dual-Core Intel Xeon 2.66 GHz. memory 5 GB

    Software: MAC OS X Lion 10.7.5.

    Now, I would like to install Aperture on a new Mac Mini: 2.6 GHz Intel Core i5. OS X: El Capitan.

    All the series nor are available.

    But the Mac Mini can't find software to install, even if the disk is in the drive.

    Need your help to tackle this problem.

    Thanks in advance

    Opening 1 does not work on El Capitan. You need minimum Aperture 3 and which is no longer sold. Time for a new plan.

  • Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

    Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

    The airport connects using DHCP in Bridge Mode

    The router address is 192.168.80.1

    Address IPv4 is 192.168.80.2

    DNS server is the same as the router, but grayed out

    Mac Mini IPv4 Address is 192.168.80.3

    IPv6 automatically configures

    Also updated the firmware of the airport; no change.

    ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

    Any ideas to fix?

    Thank you.

    Post edited by: en maschera

    but my my Mac mini does not connect to the internet.

    The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

    Hello

    Network preferences may be damaged.

    Open the Finder. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    / Library/Preferences/SystemConfiguration

    Click OK, and then move all files in the SystemConfiguration folder to the trash.

    Restart your Mac. See if that makes a difference.

    Your Mac will generate a new SystemConfiguration folder for you.

    Then open AirPort Utility located in HD > Applications > Utilitiies

    Make sure that both Internet and Extreme are green.

  • End of 2012 the Ethernet Mini Mac does not connect

    Everything worked very well upward until a week ago.  I did all these recent software updates to cause problems.

    I'm running OS X 10.11.3.  I use wired ethernet.  My ethernet does not work.  Preferences network indicates that the cable is disconnected.  It is not the case.  I tried to use another cable and same results.  I have a managed switch and it still says that when the Mini is on that the port is turned on and has 1000 full duplex connection.  When I power down the port turns off indicating it is nothing plugged in, when I turn on it powered back upward.  Therefore, it is not as if the ethernet port has failed.

    I tried to renew the DHCP lease in network, deactivation and reactivation of the ethernet service preferences and still no luck.  Keeps coming up as ethernet is not connected.  I opened terminal and ran ifconfig and receive nothing.  I am unable to ping to any external site.  I am also unable to connect to my modem.

    Wireless works fine.  I have a second, identical Mac Mini connected to the same hardware via ethernet, which works very well, so it doesn't seem to be any hardware related issues.  I use all the gear from ubiquiti networks, 24-port POE switch and usg 4 router pro, all new age of 2 months.  This must be a Mac issue and has nothing to do with my equipment.  2014 mac Book Pro works fine as well as 2 iPad Pros and 2 iPhones though wireless connections for them.

    Any help is greatly appreciated.

    It happened to other institutions.

    Take a look at > If the Ethernet on your Mac stopped working recently - Apple supports

  • Mini video does not display not showing

    With the help of Skype 7.10.0.101 (later that day)

    Maybe Skype updated, but for some reason any small mini video that usually does not appear when someone has a webcam to the top most, just the usual widget that has the mute option and hang up.

    I tried to delete my settings and reinstall Skype and none has solved the problem.

    I use 10 Pro N 64 bit Windows and it worked before. Someone at - it Info?

    You ask a friend to make sure they use the currently latest 7.11 of Skype for Mac version.

    http://blogs.Skype.com/2015/08/24/Skype-7-11-for-Mac/

  • T400 and Advanced Mini Dock - does not detect DVI monitor

    I have a T400 with integrated graphics and Windows 7 Professional 64-bit, and I recently bought an Advanced Mini Dock for it.  I have a Dell 1800FP monitor connected to the dock via the DVI output.  When I anchor the T400, the system does not detect the external monitor.  If I go to the resolution of the screen and click on detect, it does not appear.  The weird part is that if I reboot then than in the dock, when the system comes back he * is * detect and use the external monitor.

    Any ideas what's happening?  Other equipment connected by the base (USB, Ethernet cable devices) all work very well.

    I think I solved this problem.  I uninstalled my video driver and installed the latest version from the Lenovo Web site (which was more recent than the one found by Lenovo System Update).  Now my system properly detects the external monitor when I attach to the docking station.

  • MIcrophone on HP mini 1000 does not work do not with Ubuntu

    I have a HP mini 1000 with Ubuntu installed on it.  I tried to use the microphone, but it does not work...  I don't know if she just because I do not have the right drivers, or it's broken...  So I wonder where I could find the right drivers (or if there is a fix), or weather I should just send it to get fixed.

    Thank you.

    P.S. - If you need more information about it, just tell me.

    Hi all -

    Creative image HP MIE was published today online!

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2020&LC=en&DLC=en&cc=us&product=3877034&lang=en

    Detailed instructions are on the site.

    -MiniChic

  • Mini iPad does not recognise my fingerprint

    My ipad is locked and does not recognise my fingerprint. I can't turn it off and recover or delete and create new password

    Hold the sleep/wake and "home" button until the apple logo appears. You must then enter your digital access code. If you are in the iPad are trying to change the fingerprint.

Maybe you are looking for