T400 and Advanced Mini Dock - does not detect DVI monitor

Similar Questions

• T400 and Advanced mini dock

  Hi - I have a T400 with integrated graphics card and I'm looking into getting a mini dock advanced to run an external monitor.

  What output resolution has done with success through the advanced mini dock VGA port? -This will help me understand which monitor to get, I read that many had bad signal of the dock when using the VGA port.

  As my T400's only integrated graphics, I won't be able to use the port DVI - is this still true or something changed?

  Your comments would be much appreciated,

  Thank you

  Cosmin

  Hi cosma12,

  Your T400 with integrated graphics can digital video output through integrated DisplayPort or DVI connector on the advanced Mini dock. It is only the switchable T400 graph that cannot use DVI with integrated graphics card, they must use the ATI chip instead.

  Graphics from Intel in the T400 can drive 1920 x 1200 on DVI or DisplayPort - which I think is the highest resolution, supported by the single-link DVI. If you are shopping for monitors, I highly recommend to make one with a digital input: DVI / HDMI / DisplayPort. the video quality is theoretically (and practically) better than when using analog (VGA).

  EDIT: Oops, the T400 (and R400) do NOT have the DisplayPort, while the largest do T500/R500. My bad.

• Windows 7 does not detect external monitor!

  Hi I have a huge dilemma!

  My laptop does not recognize the external monitor. Earlier in the day, he detected the external monitor and perfectly well worked through to extend, in doubles, you name it. However, after restarting my computer, I was unable to get the external display to be recognized...

  I use a laptop Lenovo y470 and nvidia gt 550 m 64-bit. I've updated the grahpics card but in vain...

  The way I have it plugged into the external monitor is using a hdmi cable to connect the laptop to a monitor for a DVI-HDMI adapter. Basically, the dvi port became a port hdmi with this adapter.  its dvi - d.

  I think that restarting the computer developed a few updates and the graphics card only connects via VGA or HDMI and DVI not? I'm not sure... I'd love any idea of a solution.

  Hello

  If you do not see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  Make sure that the monitor you want to extend your desktop is turned on and plugged the correct video port on your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  Method 1:

  For more details, see the following articles:

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Method 2:

  I suggest you to check the history of update for the recently installed updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Method 3:

  I suggest to see the link and try to run the troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 4:

  I suggest that you try to do a system restore and check whether the problem is resolved.

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• X 220 mini dock does not charge

  Hello

  I have a 220 X with mini dock 433710U. When the laptop is connected and switched on Power Manager indicates the battery is in charge, but the percentage of load changes never even after 12 hours of being on the dock. No idea why? I have a power of 90W attached - do I need a more powerful? I thought the 90W power supply was enough for this dock.

  
  

• Z50 does not detect second monitor HDMI

  I recently purchased the Lenovo Z50 - 70 with 16 GB of ram and nvidia 840 m video card.

  Today I tried to connect the laptop to my LG 47LA6208-ZA, but the laptop does not recognize a second monitor. When I try to detect that another monitor nothing find it.

  I don't know there is no problem with the tv or hdmi cable, cause another pc with a cable hdmi even on the same port hdmi works perfectly.

  Any ideas what could be the problem here? I have already updated all the drivers.

  However, I do not know on what card video the hdmi port is on, the nvidia or intel on board.

  Any help would be appreciated!

  It turns out that the hdmi cable is the problem after all! Which is really strange, cause there is no problem with the other pc. However, I am very happy that this is resolved! Thanks for the support!

• Why my Hp netbook does not detect the internal speakers?

  My Hp Mini 5103 does not detect its internal loudspeakers. I have never dropped or done damage to him but he wil not even recognize that there are fixed speakers.

  Check Device Manager to see if you have a driver problem.  Click Start and right-click computer.  Click Properties-> Device Manager.  Look where it says "audio, video and game controllers.  If there is! or? next to the entries, you need to download the driver on the HP website.  If this isn't the case, right click on the entries there and click Properties to see if the device has somehow got disabled.

  Good luck.

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)

• Battery ThinkPad Advanced Mini Dock (250410U) display will not extend

  I have a T400 (2764 CTO with a Radeon HD 3400), an Acer 23 "monitor and an advanced Mini Dock (part 250410U, model 2504). I am trying to expand the display of the T400 to the Acer monitor via a VGA cable. When I plug the monitor directly into the laptop, the screen extends. However, when I dock the T400 and connect the monitor to the Mini Dock, I can't get a signal on the screen. Any thoughts? Thank you.

  the same behavior occurs with the Intel GPU mode is?

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• Satellite P10 304 BIOS does not detect HARD and CDROM drive

  My HDD p10-304 has recently failed.
  I bought a new 60 GB western digital 2.5 drive "and installed today.

  At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
  This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

  I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

  The only difference is that the insulation on the original drive sleeve should be reduced by half.
  The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
  Few albums I had to remove but that should be no problem.

  Someone at - it suggestions?

  Thank you, Stu.

  Hello

  What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

  You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

  But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

• I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  Original title: undetected sd eject not

  I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Smartphones DM6 does not detect my phone and will not leave!

  Hi, I posted my problem before and have also seen other users posted the similar problem before but the haven had a bit of luck to find a solution...

  I've tried almost everything to try to clean uninstall including deleting the files in the records of the registry etc. etc. of DMs all restart and reinstall. always my DM 6 does not detect my phone but my windows has no problem see my phone.

  I had to just uninstall and go back to DM5, that worked perfectly. Fact that it works on DM5 allows me to avoid any malfunction of the equipment.

  Finally, I noticed that there are out there with this problem, users have also hurt close the DM6. whenever we try to close, it just hangs there and we must close it manually using the Task Manager. I hope that the details given will be able to help technical support troubleshoot a kind of solutions.

  I'm perfectly fine with the help of DM5 but my future plan is to change my phone for the BB Torch. And with this current problem I won't be able to get my torch to work on DM6 on my computer. I hope we can get some sort of solution.  I am running windows XP sp3

  I hope to have news from the blackberry support team soon.

  Hello again,

  I don't know where you got this information... If it is true that perhaps your carrier will not be able to solve the problem, what they can do is to climb your case up to the FRAME. It is the only channel through which you can get a 'free' RIM on any question support (including this one).

  See you soon!