Restart a run OWB cycle failed from the point that he has failed
HelloWe use OWB 11.1.
The loading cycle looks like this: first, we all sources at loads of ST1, then all ST1 for ST2 etc TNCs to STn + 1, STn + 1 for the end allows you to say ST1 schema tables is done with success, but ST2 defective after 87% due to erroneous data.
How to restart the cycle ST2 failed step after that bad data are fixed? By default, it seems not be a way to revive OWB cycle step failed, is there? Is there then no work around to reach then?
BR,
Jaanus
No, you must define your own controls to run.
Tags: Business Intelligence
Similar Questions
-
Windows 7 with the latest updates. Latest Firefox 38.0.1.
Typing slows down to the point that it's frustrating and I need to restart firefox. When the computer reboots, all right. Then after a day or two, it slows down again. I have run Norton malware scans. Hardware acceleration disabled. No other applications running.Almost ready switch to Chrome...
Suggestions?
Thanks to all those of you who looked at my problem and made suggestions to solve them.
I decided to go there and try Chrome.
Since it was not an agreement on the solution to my problem solid (different approaches have been proposed) and I had already tried one number of other approaches based on firefox help, I decided that I had invested enough time to solve the problem and that I would move.
I always use firefox on my other computer with Windows Vista because I do NOT feel the creeping slowness problem and that he had to constantly restart firefox to regain normal performance on this computer. It uses the same version of firefox.
Thank you all...
-Simon
-
Since the upgrade to Windows 10 and despite reinstall it Lightroom. Lightroom from the Creative clouds simply crashes. I have now reached the point that I can't export and only works on 1 image at a time and constantly keep opening and closing of the software
Hello
Please go the Edit option in the library Module, then go in the preferences.
Go to the performance tab and uncheck the option "use graphics processor.
Restart lightroom, and see if Lightroom works.
Please let us know if it helps.
Kind regards
Tanuj
-
I can't open the documents and photos from the emails that I receive. The Microsoft Essentials antivirus is the problem? How can I fix it?
E-mail address is removed from the privacy *.
Hello, end of file. PPS Finally today its opening.
I have incredimail and use ' openoffice.org because I don't have any power point.
Thank you for your help.
-
How to boot from the flash drive which has xp to install an OS?
Boot from the flash drive
How to start from the flash drive which has xp to install an OS
the system's model of netbook rlg
Intel Valérie mgsone
How to install Windows XP on a Netbook using a USB flash drive
http://www.TechSpot.com/VB/topic160906.htmlJ W Stuart: http://www.pagestart.com
-
I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.
EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.
Thank you
Ron
Hi Ron,
Can you please do the following?
-Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.
-Log on to the EM console, go to the homepage of the listener.
-In the Oracle Listener menu, select target Configuration > Configuration of the analysis.
-Ensure that the parameters, including the Listener.ora directory, are properly.
Kind regards
-Loc
-
Trying to access my creative cloud account to download a trial version of InDesign... I have a blank in the CC window screen when opened...? Water from the tap that says I'm download Indesign has been stationary for hours? The CC window is empty... I don't think it's the download. Why would it be?
White screen
-
Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.
There is no serial numbers for products Creative cloud,
Sign out of Creative Cloud App and sign in the back once
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
If the trial warning still appears, then make sure your hosts file once entries
Log, activation, or connection errors. CS5.5 and later versions
-
I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked. I changed my password to Yahoo mail but can't find the field to change the password on my devices. It is simply not there, what is happening?
For some reason any change automatically if change you it online. Today, I changed my password through my office and I went to change the mail and she had already changed.
You can try to delete your account your unit off and add it again.
-
A message to the point that says that the server is not correct on hotmail.
Original title: info server accounts Hotmail
A message to the point that says that the server is not correct on hotmail. Where can I get this right?
Dorothy pc appears now as the server. I don't remember giving this info. Also, I have 3 hotmail accounts appear, all of same email address. How can I get them all together?
Hello
The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
http://windowslivehelp.com/product.aspx?ProductID=10
Hope this helps,
-
I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to fix the problem because the link does not show?
You will have to go the website of the manufacturer of your graphics card and download the current drivers.
-
in the most recent version of the software, how do you define the current-time indicator to return to the point that he started on an audio overview? He did it in the old version. I don't find a setting for this in 2015 software. Thank you
You can use the zero on the numeric keypad key. See the sixth in this article:
known issues in after effects CC 2015 (13.5). After the effects of interest area
-
ESXi host running 6 VCSA disconnected from the vCenter
Hi guys,.
I have a weird problem with my vCenter build 6. Single cluster of ESXi hosts. Running VCSA 6.0 and 6.0 ESXI. Making a storage of the vCenter vMotion initially got stuck at 77% and the ESXi host running the disconnected from vCenter vCenter. But I can connect directly to the ESXi host with vsphere client and see the vCenter VM works perfectly well. If I try to manually connect host ESXi and vCenter, I get the error "Failed to contact the host specified") both are in the same subnet and VLAN. I can migrate to other virtual machines without problem. I even restarted the host and yet I am not able to connect to vCenter. The host connects to vCenter if I reboot vCenter, but after a few minutes, disconnects again (even if no task does run on this topic.) I have no HA or DRS enabled at this point that I build this new environment and only presented a single LUN as a store of test data to the cluster.
Any ideas?
OK, I think I fixed that or have at least a work around. So the underlying question was hiding ID mode/CPU EVC. I'm under the cluster to a level of EVC to reduce until I have migrate workloads from old environment and I think that this created a problem for the unit vCenter. To resolve this problem, I turned off the unit, directly connected to the ESXi host that had the camera running, edited the virtual machine and reset the masking of CPUID. Also, I've hidden the flag NX/XD of the guest. It's temporary (I hope) as once I increase the EVC to the Haswell, I will expose the NX/XD comments and test. For the moment, it is of the workaround I did. It may be of some use to someone.
-
Stop and run option is missing from the Start Menu.
Original title: Administrator group of experts.
On the Admin Panel when I want to close I normally press start and the "closing". However the button turn off disappeared and only shows button "quit". In addition the 'run' button is gone as well. How to restore it back to normal?
It will help with these situations... and, this lesson, I've added a few new commands to my answer of registry file generic copy/paste for these kinds of things:
If you see things like this:
You do not have sufficient security privileges to restore your system.
The System Restore tab is missing from the my computer properties.
System Restore has been disabled by group policy. To turn on system restore, contact your domain administrator.
The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
The task manager has been disabled by your system administrator.
The registry editor has been disabled by your system administrator.
The task manager has been disabled by group policy.
The registry editor has been disabled by group policy.
The command prompt has been disabled by your administrator. Press a key to continue...The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.
If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.
You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.
Unless you have disabled these things on purpose, chances are good that your system has a malware infection. The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.
If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.
The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP. This is what it would be like you, but these measures are not necessary.
You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.
No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).
If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.
These commands from registry removes the registry entries that are stop opening programs. Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.
Before making any changes to your registry, back up the registry with this free and popular tool:
http://www.SnapFiles.com/get/ERUNT.html
Open Notepad to create a new text file:
Click Start, run and enter in the box:
notebook
Click OK to open a new Notepad file.
Copy and paste the following lines of text into the new Notepad file.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableTaskMgr" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableRegistryTools" = -.
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
"DisableCMD" = -.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
"DisableTaskMgr" = -.
[HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableTaskMgr" = -.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"DisableCAD" = DWORD: 00000000
[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
"DisableConfig" = -.
[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
"DisableSR" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoRun" = -.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoRun" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoClose" = -.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoClose" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoSetTaskbar" = -.Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:
enableit.reg
After you save the file, close Notepad.
Locate the file enableit.reg on your desktop and double-click it.
Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.
Answer in the affirmative to the question... Are you sure you want to add the information in the registry?
You should then see a message that information has been registered in the register.
Reboot your system and test.
You can delete the enableit.reg file when you are finished.
If the registry editor has also been disabled, we first fix (not a problem).
-
can I restart my mac pro from the beginning.i/ve really messed it .i/ve only had 2 days.thanks
A new Mac comes with 90 days of free technical support, AppleCare.
Please call AppleCare.
AppleCare: 1-800-275-2273
Maybe you are looking for
-
It happened for about three months. I just fully describe the situation, there is no more information to provide. My store of information about this issue is sold out. In my information firm, there is this problem remains. It is the truth, the whole
-
Cannot connect pc to the xbox with the befsr41 or upgrade firmware
Hi, I bought a used befsr41 v.2 router and it worked perfectly, could connect my pc to the xbox and watch the videos/photos/music. A few months later router exploded and so I bought a new v.4 befsr41. Now my xbox says there is no connected computer.
-
Cannot log on to internet DNS problem: _
I have 4 desktops and a laptop. both are running windows vista 64-bit and a 32-bit vista, an another windows xp. The laptop is windows 7 32 bit. All the computer are related to a home network. My window problem 2 64 bit vista and the laptop does not
-
Toshiba Satellite C665D-S5048 computer laptop Windows 7 key COA faded
Hello My Windows 7 key is dimmed on my computer Toshiba laptop model Satellite C655D-S5048 and runs Windows 7 Home Premium OA. My problem is my hard drive is completely broke down on me which means that the computer no longer detects it, and I'll get
-
The execution of a method of DC with parameters: variable bindings or pageFlowScope?
I use a data control method to send the email that has parameters. Based on the behavior I see when I drag and drop methods of data control to a page and I have JDeveloper automatically generate a form of parameter, I did the following which uses to